From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew@lunn.ch>
Cc: Simon Horman <horms@kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Jacob Keller <jacob.e.keller@intel.com>,
Kory Maincent <kory.maincent@bootlin.com>,
netdev@vger.kernel.org,
Vadim Fedorenko <vadim.fedorenko@linux.dev>
Subject: [PATCH net-next v2 1/4] net: phy: micrel: improve HW timestamping config logic
Date: Sat, 29 Nov 2025 19:53:31 +0000 [thread overview]
Message-ID: <20251129195334.985464-2-vadim.fedorenko@linux.dev> (raw)
In-Reply-To: <20251129195334.985464-1-vadim.fedorenko@linux.dev>
The driver was adjusting stored values independently of what was
actually supported and configured. Improve logic to store values
once all checks are passing
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
---
drivers/net/phy/micrel.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 05de68b9f719..1ada05dd305c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -3157,9 +3157,6 @@ static int lan8814_hwtstamp_set(struct mii_timestamper *mii_ts,
int txcfg = 0, rxcfg = 0;
int pkt_ts_enable;
- ptp_priv->hwts_tx_type = config->tx_type;
- ptp_priv->rx_filter = config->rx_filter;
-
switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
ptp_priv->layer = 0;
@@ -3187,6 +3184,18 @@ static int lan8814_hwtstamp_set(struct mii_timestamper *mii_ts,
return -ERANGE;
}
+ switch (config->rx_filter) {
+ case HWTSTAMP_TX_OFF:
+ case HWTSTAMP_TX_ON:
+ case HWTSTAMP_TX_ONESTEP_SYNC:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ ptp_priv->hwts_tx_type = config->tx_type;
+ ptp_priv->rx_filter = config->rx_filter;
+
if (ptp_priv->layer & PTP_CLASS_L2) {
rxcfg = PTP_RX_PARSE_CONFIG_LAYER2_EN_;
txcfg = PTP_TX_PARSE_CONFIG_LAYER2_EN_;
@@ -5051,9 +5060,6 @@ static int lan8841_hwtstamp_set(struct mii_timestamper *mii_ts,
int txcfg = 0, rxcfg = 0;
int pkt_ts_enable;
- ptp_priv->hwts_tx_type = config->tx_type;
- ptp_priv->rx_filter = config->rx_filter;
-
switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
ptp_priv->layer = 0;
@@ -5081,6 +5087,9 @@ static int lan8841_hwtstamp_set(struct mii_timestamper *mii_ts,
return -ERANGE;
}
+ ptp_priv->hwts_tx_type = config->tx_type;
+ ptp_priv->rx_filter = config->rx_filter;
+
/* Setup parsing of the frames and enable the timestamping for ptp
* frames
*/
--
2.47.3
next prev parent reply other threads:[~2025-11-29 19:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-29 19:53 [PATCH net-next v2 0/4] support for hwtstamp_get in phy - part 2 Vadim Fedorenko
2025-11-29 19:53 ` Vadim Fedorenko [this message]
2025-11-29 20:49 ` [PATCH net-next v2 1/4] net: phy: micrel: improve HW timestamping config logic Andrew Lunn
2025-12-01 9:33 ` Kory Maincent
2025-12-01 10:34 ` Vadim Fedorenko
2025-11-29 19:53 ` [PATCH net-next v2 2/4] net: phy: micrel: add HW timestamp configuration reporting Vadim Fedorenko
2025-11-29 20:49 ` Andrew Lunn
2025-12-01 9:28 ` Kory Maincent
2025-11-29 19:53 ` [PATCH net-next v2 3/4] net: phy: microchip_rds_ptp: improve HW ts config logic Vadim Fedorenko
2025-11-29 20:51 ` Andrew Lunn
2025-12-01 9:34 ` Kory Maincent
2025-12-01 10:28 ` Vadim Fedorenko
2025-11-29 19:53 ` [PATCH net-next v2 4/4] net: phy: microchip_rds_ptp: add HW timestamp configuration reporting Vadim Fedorenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251129195334.985464-2-vadim.fedorenko@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.