All of lore.kernel.org
 help / color / mirror / Atom feed
From: Praveen K Paladugu <prapal@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
	decui@microsoft.com, tglx@linutronix.de, mingo@redhat.com,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
	bp@alien8.de, dave.hansen@linux.intel.com, x86@kernel.org,
	hpa@zytor.com, arnd@arndb.de
Cc: anbelski@linux.microsoft.com, prapal@linux.microsoft.com,
	easwar.hariharan@linux.microsoft.com,
	nunodasneves@linux.microsoft.com,
	skinsburskii@linux.microsoft.com
Subject: [PATCH v7 3/4] hyperv: Use reboot notifier to configure sleep state
Date: Fri,  5 Dec 2025 14:17:07 -0600	[thread overview]
Message-ID: <20251205201721.7253-4-prapal@linux.microsoft.com> (raw)
In-Reply-To: <20251205201721.7253-1-prapal@linux.microsoft.com>

Configure sleep state information from ACPI in MSHV hypervisor using
a reboot notifier. This data allows the hypervisor to correctly power
off the host during shutdown.

Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Reviewed-by: Stansialv Kinsburskii <skinsburskii@linux.miscrosoft.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
---
 arch/x86/hyperv/hv_init.c       |  1 +
 arch/x86/include/asm/mshyperv.h |  1 +
 drivers/hv/mshv_common.c        | 78 +++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index e28737ec7054..daf97a984b78 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -555,6 +555,7 @@ void __init hyperv_init(void)
 
 		hv_remap_tsc_clocksource();
 		hv_root_crash_init();
+		hv_sleep_notifiers_register();
 	} else {
 		hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
 		wrmsrq(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 10037125099a..62a89debfbce 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -177,6 +177,7 @@ int hyperv_flush_guest_mapping_range(u64 as,
 int hyperv_fill_flush_guest_mapping_list(
 		struct hv_guest_mapping_flush_list *flush,
 		u64 start_gfn, u64 end_gfn);
+void hv_sleep_notifiers_register(void);
 
 #ifdef CONFIG_X86_64
 void hv_apic_init(void);
diff --git a/drivers/hv/mshv_common.c b/drivers/hv/mshv_common.c
index aa2be51979fd..ee733ba1575e 100644
--- a/drivers/hv/mshv_common.c
+++ b/drivers/hv/mshv_common.c
@@ -14,6 +14,9 @@
 #include <asm/mshyperv.h>
 #include <linux/resume_user_mode.h>
 #include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
 
 #include "mshv.h"
 
@@ -138,3 +141,78 @@ int hv_call_get_partition_property(u64 partition_id,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(hv_call_get_partition_property);
+
+/*
+ * Corresponding sleep states have to be initialized in order for a subsequent
+ * HVCALL_ENTER_SLEEP_STATE call to succeed. Currently only S5 state as per
+ * ACPI 6.4 chapter 7.4.2 is relevant, while S1, S2 and S3 can be supported.
+ *
+ * In order to pass proper PM values to mshv, ACPI should be initialized and
+ * should support S5 sleep state when this method is invoked.
+ */
+static int hv_initialize_sleep_states(void)
+{
+	u64 status;
+	unsigned long flags;
+	struct hv_input_set_system_property *in;
+	acpi_status acpi_status;
+	u8 sleep_type_a, sleep_type_b;
+
+	if (!acpi_sleep_state_supported(ACPI_STATE_S5)) {
+		pr_err("%s: S5 sleep state not supported.\n", __func__);
+		return -ENODEV;
+	}
+
+	acpi_status = acpi_get_sleep_type_data(ACPI_STATE_S5, &sleep_type_a,
+					       &sleep_type_b);
+	if (ACPI_FAILURE(acpi_status))
+		return -ENODEV;
+
+	local_irq_save(flags);
+	in = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	memset(in, 0, sizeof(*in));
+
+	in->property_id = HV_SYSTEM_PROPERTY_SLEEP_STATE;
+	in->set_sleep_state_info.sleep_state = HV_SLEEP_STATE_S5;
+	in->set_sleep_state_info.pm1a_slp_typ = sleep_type_a;
+	in->set_sleep_state_info.pm1b_slp_typ = sleep_type_b;
+
+	status = hv_do_hypercall(HVCALL_SET_SYSTEM_PROPERTY, in, NULL);
+	local_irq_restore(flags);
+
+	if (!hv_result_success(status)) {
+		hv_status_err(status, "\n");
+		return hv_result_to_errno(status);
+	}
+
+	return 0;
+}
+
+/*
+ * This notifier initializes sleep states in mshv hypervisor which will be
+ * used during power off.
+ */
+static int hv_reboot_notifier_handler(struct notifier_block *this,
+				      unsigned long code, void *another)
+{
+	int ret = 0;
+
+	if (code == SYS_HALT || code == SYS_POWER_OFF)
+		ret = hv_initialize_sleep_states();
+
+	return ret ? NOTIFY_DONE : NOTIFY_OK;
+}
+
+static struct notifier_block hv_reboot_notifier = {
+	.notifier_call = hv_reboot_notifier_handler,
+};
+
+void hv_sleep_notifiers_register(void)
+{
+	int ret;
+
+	ret = register_reboot_notifier(&hv_reboot_notifier);
+	if (ret)
+		pr_err("%s: cannot register reboot notifier %d\n", __func__,
+		       ret);
+}
-- 
2.51.0


  parent reply	other threads:[~2025-12-05 20:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-05 20:17 [PATCH v7 0/4] Add support for clean shutdown with MSHV Praveen K Paladugu
2025-12-05 20:17 ` [PATCH v7 1/4] fixup! Drivers: hv: Introduce mshv_vtl driver Praveen K Paladugu
2025-12-05 23:06   ` Wei Liu
2025-12-05 23:08     ` Wei Liu
2025-12-05 23:11       ` Wei Liu
2025-12-05 20:17 ` [PATCH v7 2/4] hyperv: Add definitions for MSHV sleep state configuration Praveen K Paladugu
2025-12-05 20:17 ` Praveen K Paladugu [this message]
2025-12-05 20:17 ` [PATCH v7 4/4] hyperv: Cleanly shutdown root partition with MSHV Praveen K Paladugu
2025-12-05 23:26 ` [PATCH v7 0/4] Add support for clean shutdown " Wei Liu
2025-12-10  8:14 ` Nathan Chancellor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251205201721.7253-4-prapal@linux.microsoft.com \
    --to=prapal@linux.microsoft.com \
    --cc=anbelski@linux.microsoft.com \
    --cc=arnd@arndb.de \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=decui@microsoft.com \
    --cc=easwar.hariharan@linux.microsoft.com \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=nunodasneves@linux.microsoft.com \
    --cc=skinsburskii@linux.microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=wei.liu@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.