From: Niranjan H Y <niranjan.hy@ti.com>
To: <alsa-devel@alsa-project.org>
Cc: <linux-sound@vger.kernel.org>, <broonie@kernel.org>,
<ckeepax@opensource.cirrus.com>, <lgirdwood@gmail.com>,
<yung-chuan.liao@linux.intel.com>,
<ranjani.sridharan@linux.intel.com>, <perex@perex.cz>,
<tiwai@suse.com>, <cezary.rojewski@intel.com>,
<peter.ujfalusi@linux.intel.com>, <kai.vehmanen@linux.intel.com>,
<pierre-louis.bossart@linux.dev>, <shenghao-ding@ti.com>,
<v-hampiholi@ti.com>, <baojun.xu@ti.com>,
<dan.carpenter@linaro.org>, <sandeepk@ti.com>,
Niranjan H Y <niranjan.hy@ti.com>
Subject: [PATCH v2 1/8] ASoC: tas2783A: sdw_utils: support ch 3 & 4
Date: Mon, 15 Dec 2025 21:02:12 +0530 [thread overview]
Message-ID: <20251215153219.810-1-niranjan.hy@ti.com> (raw)
Currently the machine driver for tas2783A can only
support 2 channels. This patch adds support for
2 channel playback with 4 device setup.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
---
v2:
- no change
---
sound/soc/sdw_utils/soc_sdw_ti_amp.c | 4 ++++
sound/soc/sdw_utils/soc_sdw_utils.c | 22 ++++++++++++++++++----
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/sound/soc/sdw_utils/soc_sdw_ti_amp.c b/sound/soc/sdw_utils/soc_sdw_ti_amp.c
index cbd60faec..488ef2ef4 100644
--- a/sound/soc/sdw_utils/soc_sdw_ti_amp.c
+++ b/sound/soc/sdw_utils/soc_sdw_ti_amp.c
@@ -58,6 +58,10 @@ int asoc_sdw_ti_spk_rtd_init(struct snd_soc_pcm_runtime *rtd,
strscpy(speaker, "Left Spk", sizeof(speaker));
} else if (!strncmp(prefix, "tas2783-2", strlen("tas2783-2"))) {
strscpy(speaker, "Right Spk", sizeof(speaker));
+ } else if (!strncmp(prefix, "tas2783-3", strlen("tas2783-3"))) {
+ strscpy(speaker, "Left Spk2", sizeof(speaker));
+ } else if (!strncmp(prefix, "tas2783-4", strlen("tas2783-4"))) {
+ strscpy(speaker, "Right Spk2", sizeof(speaker));
} else {
ret = -EINVAL;
dev_err(card->dev, "unhandled prefix %s", prefix);
diff --git a/sound/soc/sdw_utils/soc_sdw_utils.c b/sound/soc/sdw_utils/soc_sdw_utils.c
index f169d9589..1d1ba7a25 100644
--- a/sound/soc/sdw_utils/soc_sdw_utils.c
+++ b/sound/soc/sdw_utils/soc_sdw_utils.c
@@ -40,11 +40,25 @@ static const struct snd_soc_dapm_widget lr_spk_widgets[] = {
SND_SOC_DAPM_SPK("Right Spk", NULL),
};
+static const struct snd_soc_dapm_widget lr_4spk_widgets[] = {
+ SND_SOC_DAPM_SPK("Left Spk", NULL),
+ SND_SOC_DAPM_SPK("Right Spk", NULL),
+ SND_SOC_DAPM_SPK("Left Spk2", NULL),
+ SND_SOC_DAPM_SPK("Right Spk2", NULL),
+};
+
static const struct snd_kcontrol_new lr_spk_controls[] = {
SOC_DAPM_PIN_SWITCH("Left Spk"),
SOC_DAPM_PIN_SWITCH("Right Spk"),
};
+static const struct snd_kcontrol_new lr_4spk_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Left Spk"),
+ SOC_DAPM_PIN_SWITCH("Right Spk"),
+ SOC_DAPM_PIN_SWITCH("Left Spk2"),
+ SOC_DAPM_PIN_SWITCH("Right Spk2"),
+};
+
static const struct snd_soc_dapm_widget rt700_widgets[] = {
SND_SOC_DAPM_HP("Headphones", NULL),
SND_SOC_DAPM_MIC("AMIC", NULL),
@@ -69,10 +83,10 @@ struct asoc_sdw_codec_info codec_info_list[] = {
.dailink = {SOC_SDW_AMP_OUT_DAI_ID, SOC_SDW_AMP_IN_DAI_ID},
.init = asoc_sdw_ti_amp_init,
.rtd_init = asoc_sdw_ti_spk_rtd_init,
- .controls = lr_spk_controls,
- .num_controls = ARRAY_SIZE(lr_spk_controls),
- .widgets = lr_spk_widgets,
- .num_widgets = ARRAY_SIZE(lr_spk_widgets),
+ .controls = lr_4spk_controls,
+ .num_controls = ARRAY_SIZE(lr_4spk_controls),
+ .widgets = lr_4spk_widgets,
+ .num_widgets = ARRAY_SIZE(lr_4spk_widgets),
},
},
.dai_num = 1,
--
2.43.0
next reply other threads:[~2025-12-17 9:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-15 15:32 Niranjan H Y [this message]
2025-12-15 15:32 ` [PATCH v2 2/8] ASoC: tas2783A: use custom firmware Niranjan H Y
2025-12-15 15:32 ` [PATCH v2 3/8] ASoC: tas2783A: update default init writes Niranjan H Y
2025-12-15 15:32 ` [PATCH v2 4/8] ASoC: tas2783A: fix error log for calibration data Niranjan H Y
2025-12-15 15:32 ` [PATCH v2 5/8] ASoc: tas2783A: fw name based on system details Niranjan H Y
2025-12-15 15:32 ` [PATCH v2 6/8] ASoc: tas2783A: acpi match for 4 channel for mtl Niranjan H Y
2025-12-15 15:32 ` [PATCH v2 7/8] ASoC: tas2783A: use acpi initialisation table Niranjan H Y
2025-12-15 15:47 ` Charles Keepax
2025-12-15 15:32 ` [PATCH v2 8/8] ASoC: tas2783A: read slave properties from acpi table Niranjan H Y
2025-12-18 15:32 ` [PATCH v2 1/8] ASoC: tas2783A: sdw_utils: support ch 3 & 4 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251215153219.810-1-niranjan.hy@ti.com \
--to=niranjan.hy@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=ckeepax@opensource.cirrus.com \
--cc=dan.carpenter@linaro.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.dev \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sandeepk@ti.com \
--cc=shenghao-ding@ti.com \
--cc=tiwai@suse.com \
--cc=v-hampiholi@ti.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.