[PATCH v20 3/3] docs: leds: Document TI LP5812 LED driver

[Nam Tran <trannamatk@gmail.com>]

The driver provides sysfs interfaces to control and configure the
LP5812 device and its LED channels.

The documetation describes the chip's capabilities, sysfs interface,
and usage examples.

Signed-off-by: Nam Tran <trannamatk@gmail.com>
---
 Documentation/leds/index.rst       |  1 +
 Documentation/leds/leds-lp5812.rst | 50 ++++++++++++++++++++++++++++++
 MAINTAINERS                        |  1 +
 3 files changed, 52 insertions(+)
 create mode 100644 Documentation/leds/leds-lp5812.rst

diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 76fae171039c..bebf44004278 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -25,6 +25,7 @@ LEDs
    leds-lp5523
    leds-lp5562
    leds-lp55xx
+   leds-lp5812
    leds-mlxcpld
    leds-mt6370-rgb
    leds-sc27xx
diff --git a/Documentation/leds/leds-lp5812.rst b/Documentation/leds/leds-lp5812.rst
new file mode 100644
index 000000000000..c2a6368d5149
--- /dev/null
+++ b/Documentation/leds/leds-lp5812.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Kernel driver for lp5812
+========================
+
+* TI/National Semiconductor LP5812 LED Driver
+* Datasheet: https://www.ti.com/product/LP5812#tech-docs
+
+Authors: Jared Zhou <jared-zhou@ti.com>
+
+Description
+===========
+
+The LP5812 is a 4x3 matrix LED driver with support for both manual and
+autonomous animation control. This driver provides sysfs interfaces to
+control and configure the LP5812 device and its LED channels.
+
+Sysfs Interface
+===============
+
+This driver uses the standard multicolor LED class interfaces defined
+in Documentation/ABI/testing/sysfs-class-led-multicolor.rst.
+
+Each LP5812 LED output appears under ``/sys/class/leds/`` with its
+assigned label (for example ``LED_A``).
+
+The following attributes are exposed:
+  - multi_intensity: Per-channel RGB intensity control
+  - brightness: Standard brightness control (0-255)
+
+Autonomous Control Modes
+========================
+
+The driver also supports autonomous control through pattern configuration
+(e.g., direct, tcmscan, or mixscan modes) defined in the device tree.
+When configured, the LP5812 can generate transitions and color effects
+without CPU intervention.
+
+Refer to the device tree binding document for valid mode strings and
+configuration examples.
+
+Example Usage
+=============
+
+To control LED_A::
+    # Set RGB intensity (R=50, G=50, B=50)
+    echo 50 50 50 > /sys/class/leds/LED_A/multi_intensity
+    # Set overall brightness to maximum
+    echo 255 > /sys/class/leds/LED_A/brightness
diff --git a/MAINTAINERS b/MAINTAINERS
index 8d840b34c924..394165660e67 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25841,6 +25841,7 @@ M:	Nam Tran <trannamatk@gmail.com>
 L:	linux-leds@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/leds/ti,lp5812.yaml
+F:	Documentation/leds/leds-lp5812.rst
 F:	drivers/leds/rgb/Kconfig
 F:	drivers/leds/rgb/Makefile
 F:	drivers/leds/rgb/leds-lp5812.c
-- 
2.25.1