From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej@kernel.org>,
Samuel Holland <samuel@sholland.org>,
Linus Walleij <linusw@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
linux-gpio@vger.kernel.org, linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] ARM: dts: allwinner: Replace status "failed" with "fail"
Date: Thu, 25 Dec 2025 18:36:15 +0800 [thread overview]
Message-ID: <20251225103616.3203473-5-wens@kernel.org> (raw)
In-Reply-To: <20251225103616.3203473-1-wens@kernel.org>
The device tree bindings specify using "fail", not "failed".
Fix up all the ones that are wrong.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
---
arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts | 2 +-
arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts | 2 +-
arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts | 2 +-
arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
index 63e77c05bfda..f2413ba6a858 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
@@ -112,7 +112,7 @@ axp209: pmic@34 {
&i2c1 {
/* pull-ups and devices require AXP209 LDO3 */
- status = "failed";
+ status = "fail";
};
&i2c2 {
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
index c32596947647..e0c7099015da 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
@@ -96,7 +96,7 @@ axp209: pmic@34 {
&i2c1 {
/* pull-ups and devices require AXP209 LDO3 */
- status = "failed";
+ status = "fail";
};
&i2c2 {
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
index 5bce7a32651e..5dfd36e3a49d 100644
--- a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -170,7 +170,7 @@ hdmi_out_con: endpoint {
&i2c0 {
/* pull-ups and devices require AXP221 DLDO3 */
- status = "failed";
+ status = "fail";
};
&i2c1 {
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
index b32b70ada7fd..fefd887fbc39 100644
--- a/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
@@ -90,7 +90,7 @@ hdmi_out_con: endpoint {
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
- status = "failed";
+ status = "fail";
};
&i2c1 {
--
2.47.3
next prev parent reply other threads:[~2025-12-25 10:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-25 10:36 [PATCH 0/4] ARM: dts: allwinner: Fix remaining DT validation errors Chen-Yu Tsai
2025-12-25 10:36 ` [PATCH 1/4] dt-bindings: media: sun4i-a10-video-engine: Add interconnect properties Chen-Yu Tsai
2025-12-25 18:25 ` Jernej Škrabec
2025-12-30 17:46 ` Rob Herring (Arm)
2025-12-25 10:36 ` [PATCH 2/4] dt-bindings: pinctrl: sunxi: Allow pinmux sub-pattern with leading numbers Chen-Yu Tsai
2025-12-25 18:36 ` Jernej Škrabec
2026-01-02 22:21 ` Rob Herring (Arm)
2026-01-07 14:13 ` Linus Walleij
2025-12-25 10:36 ` [PATCH 3/4] ARM: dts: allwinner: sun5i-a13-utoo-p66: delete "power-gpios" property Chen-Yu Tsai
2025-12-25 18:37 ` Jernej Škrabec
2025-12-25 10:36 ` Chen-Yu Tsai [this message]
2025-12-25 18:49 ` [PATCH 4/4] ARM: dts: allwinner: Replace status "failed" with "fail" Jernej Škrabec
2026-01-08 15:07 ` Chen-Yu Tsai
2025-12-25 12:25 ` [PATCH 0/4] ARM: dts: allwinner: Fix remaining DT validation errors Krzysztof Kozlowski
2026-01-06 17:57 ` (subset) " Chen-Yu Tsai
2026-01-19 5:57 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251225103616.3203473-5-wens@kernel.org \
--to=wens@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.