From: kernel test robot <lkp@intel.com>
To: oe-kbuild@lists.linux.dev
Cc: lkp@intel.com
Subject: [conor:pinctrl 6/14] Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml:212:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
Date: Wed, 31 Dec 2025 18:19:41 +0100 [thread overview]
Message-ID: <202512311812.OHJ6bED4-lkp@intel.com> (raw)
::::::
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
TO: Conor Dooley <conor+lkp@kernel.org>
tree: https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git pinctrl
head: a8805fb8a49841ef67f240537e28ed40ce539661
commit: 1ed6a1e08e61d88da8aaee79dae0f5fdb1963218 [6/14] dt-bindings: pinctrl: pincfg-node: add restrictions on conflicting properties
:::::: branch date: 11 days ago
:::::: commit date: 11 days ago
config: arc-randconfig-2051-20251231 (https://download.01.org/0day-ci/archive/20251231/202512311812.OHJ6bED4-lkp@intel.com/config)
compiler: arc-linux-gcc (GCC) 10.5.0
dtschema version: 2025.12
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251231/202512311812.OHJ6bED4-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202512311812.OHJ6bED4-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml:212:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
vim +212 Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
3af50e548019f6 Rob Herring 2019-11-07 8
3af50e548019f6 Rob Herring 2019-11-07 9 maintainers:
3af50e548019f6 Rob Herring 2019-11-07 10 - Linus Walleij <linus.walleij@linaro.org>
3af50e548019f6 Rob Herring 2019-11-07 11
3af50e548019f6 Rob Herring 2019-11-07 12 description:
3af50e548019f6 Rob Herring 2019-11-07 13 Many data items that are represented in a pin configuration node are common
3af50e548019f6 Rob Herring 2019-11-07 14 and generic. Pin control bindings should use the properties defined below
3af50e548019f6 Rob Herring 2019-11-07 15 where they are applicable; not all of these properties are relevant or useful
3af50e548019f6 Rob Herring 2019-11-07 16 for all hardware or binding structures. Each individual binding document
3af50e548019f6 Rob Herring 2019-11-07 17 should state which of these generic properties, if any, are used, and the
3af50e548019f6 Rob Herring 2019-11-07 18 structure of the DT nodes that contain these properties.
3af50e548019f6 Rob Herring 2019-11-07 19
3af50e548019f6 Rob Herring 2019-11-07 20 properties:
3af50e548019f6 Rob Herring 2019-11-07 21 bias-disable:
3af50e548019f6 Rob Herring 2019-11-07 22 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 23 description: disable any pin bias
3af50e548019f6 Rob Herring 2019-11-07 24
3af50e548019f6 Rob Herring 2019-11-07 25 bias-high-impedance:
3af50e548019f6 Rob Herring 2019-11-07 26 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 27 description: high impedance mode ("third-state", "floating")
3af50e548019f6 Rob Herring 2019-11-07 28
3af50e548019f6 Rob Herring 2019-11-07 29 bias-bus-hold:
3af50e548019f6 Rob Herring 2019-11-07 30 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 31 description: latch weakly
3af50e548019f6 Rob Herring 2019-11-07 32
3af50e548019f6 Rob Herring 2019-11-07 33 bias-pull-up:
3af50e548019f6 Rob Herring 2019-11-07 34 oneOf:
3af50e548019f6 Rob Herring 2019-11-07 35 - type: boolean
3af50e548019f6 Rob Herring 2019-11-07 36 - $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 37 description: pull up the pin. Takes as optional argument on hardware
3af50e548019f6 Rob Herring 2019-11-07 38 supporting it the pull strength in Ohm.
3af50e548019f6 Rob Herring 2019-11-07 39
3af50e548019f6 Rob Herring 2019-11-07 40 bias-pull-down:
3af50e548019f6 Rob Herring 2019-11-07 41 oneOf:
3af50e548019f6 Rob Herring 2019-11-07 42 - type: boolean
3af50e548019f6 Rob Herring 2019-11-07 43 - $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 44 description: pull down the pin. Takes as optional argument on hardware
3af50e548019f6 Rob Herring 2019-11-07 45 supporting it the pull strength in Ohm.
3af50e548019f6 Rob Herring 2019-11-07 46
3af50e548019f6 Rob Herring 2019-11-07 47 bias-pull-pin-default:
3af50e548019f6 Rob Herring 2019-11-07 48 oneOf:
3af50e548019f6 Rob Herring 2019-11-07 49 - type: boolean
3af50e548019f6 Rob Herring 2019-11-07 50 - $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 51 description: use pin-default pull state. Takes as optional argument on
3af50e548019f6 Rob Herring 2019-11-07 52 hardware supporting it the pull strength in Ohm.
3af50e548019f6 Rob Herring 2019-11-07 53
3af50e548019f6 Rob Herring 2019-11-07 54 drive-push-pull:
b2b701b31e1c58 Rob Herring 2022-04-29 55 oneOf:
b2b701b31e1c58 Rob Herring 2022-04-29 56 - type: boolean
b2b701b31e1c58 Rob Herring 2022-04-29 57 - $ref: /schemas/types.yaml#/definitions/uint32
b2b701b31e1c58 Rob Herring 2022-04-29 58 enum: [ 0, 1 ]
b2b701b31e1c58 Rob Herring 2022-04-29 59 deprecated: true
3af50e548019f6 Rob Herring 2019-11-07 60 description: drive actively high and low
3af50e548019f6 Rob Herring 2019-11-07 61
3af50e548019f6 Rob Herring 2019-11-07 62 drive-open-drain:
b2b701b31e1c58 Rob Herring 2022-04-29 63 oneOf:
b2b701b31e1c58 Rob Herring 2022-04-29 64 - type: boolean
b2b701b31e1c58 Rob Herring 2022-04-29 65 - $ref: /schemas/types.yaml#/definitions/uint32
b2b701b31e1c58 Rob Herring 2022-04-29 66 const: 1 # No known cases of 0
b2b701b31e1c58 Rob Herring 2022-04-29 67 deprecated: true
3af50e548019f6 Rob Herring 2019-11-07 68 description: drive with open drain
3af50e548019f6 Rob Herring 2019-11-07 69
3af50e548019f6 Rob Herring 2019-11-07 70 drive-open-source:
3af50e548019f6 Rob Herring 2019-11-07 71 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 72 description: drive with open source
3af50e548019f6 Rob Herring 2019-11-07 73
3af50e548019f6 Rob Herring 2019-11-07 74 drive-strength:
3af50e548019f6 Rob Herring 2019-11-07 75 $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 76 description: sink or source at most X mA
3af50e548019f6 Rob Herring 2019-11-07 77
3af50e548019f6 Rob Herring 2019-11-07 78 drive-strength-microamp:
3af50e548019f6 Rob Herring 2019-11-07 79 description: sink or source at most X uA
3af50e548019f6 Rob Herring 2019-11-07 80
3af50e548019f6 Rob Herring 2019-11-07 81 input-enable:
3af50e548019f6 Rob Herring 2019-11-07 82 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 83 description: enable input on pin (no effect on output, such as
3af50e548019f6 Rob Herring 2019-11-07 84 enabling an input buffer)
3af50e548019f6 Rob Herring 2019-11-07 85
3af50e548019f6 Rob Herring 2019-11-07 86 input-disable:
3af50e548019f6 Rob Herring 2019-11-07 87 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 88 description: disable input on pin (no effect on output, such as
3af50e548019f6 Rob Herring 2019-11-07 89 disabling an input buffer)
3af50e548019f6 Rob Herring 2019-11-07 90
3af50e548019f6 Rob Herring 2019-11-07 91 input-schmitt-enable:
3af50e548019f6 Rob Herring 2019-11-07 92 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 93 description: enable schmitt-trigger mode
3af50e548019f6 Rob Herring 2019-11-07 94
3af50e548019f6 Rob Herring 2019-11-07 95 input-schmitt-disable:
3af50e548019f6 Rob Herring 2019-11-07 96 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 97 description: disable schmitt-trigger mode
3af50e548019f6 Rob Herring 2019-11-07 98
737df10956c425 Inochi Amaoto 2024-07-18 99 input-schmitt-microvolt:
737df10956c425 Inochi Amaoto 2024-07-18 100 description: threshold strength for schmitt-trigger
737df10956c425 Inochi Amaoto 2024-07-18 101
3af50e548019f6 Rob Herring 2019-11-07 102 input-debounce:
736ed7ce0a5d10 Rob Herring 2024-01-24 103 $ref: /schemas/types.yaml#/definitions/uint32-array
3af50e548019f6 Rob Herring 2019-11-07 104 description: Takes the debounce time in usec as argument or 0 to disable
3af50e548019f6 Rob Herring 2019-11-07 105 debouncing
3af50e548019f6 Rob Herring 2019-11-07 106
3af50e548019f6 Rob Herring 2019-11-07 107 power-source:
3af50e548019f6 Rob Herring 2019-11-07 108 $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 109 description: select between different power supplies
3af50e548019f6 Rob Herring 2019-11-07 110
3af50e548019f6 Rob Herring 2019-11-07 111 low-power-enable:
3af50e548019f6 Rob Herring 2019-11-07 112 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 113 description: enable low power mode
3af50e548019f6 Rob Herring 2019-11-07 114
3af50e548019f6 Rob Herring 2019-11-07 115 low-power-disable:
3af50e548019f6 Rob Herring 2019-11-07 116 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 117 description: disable low power mode
3af50e548019f6 Rob Herring 2019-11-07 118
3af50e548019f6 Rob Herring 2019-11-07 119 output-disable:
3af50e548019f6 Rob Herring 2019-11-07 120 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 121 description: disable output on a pin (such as disable an output buffer)
3af50e548019f6 Rob Herring 2019-11-07 122
3af50e548019f6 Rob Herring 2019-11-07 123 output-enable:
3af50e548019f6 Rob Herring 2019-11-07 124 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 125 description: enable output on a pin without actively driving it
3af50e548019f6 Rob Herring 2019-11-07 126 (such as enabling an output buffer)
3af50e548019f6 Rob Herring 2019-11-07 127
7388fa8acfce2c Lad Prabhakar 2021-10-27 128 output-impedance-ohms:
7388fa8acfce2c Lad Prabhakar 2021-10-27 129 description: set the output impedance of a pin to at most X ohms
7388fa8acfce2c Lad Prabhakar 2021-10-27 130
3af50e548019f6 Rob Herring 2019-11-07 131 output-low:
3af50e548019f6 Rob Herring 2019-11-07 132 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 133 description: set the pin to output mode with low level
3af50e548019f6 Rob Herring 2019-11-07 134
3af50e548019f6 Rob Herring 2019-11-07 135 output-high:
3af50e548019f6 Rob Herring 2019-11-07 136 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 137 description: set the pin to output mode with high level
3af50e548019f6 Rob Herring 2019-11-07 138
3af50e548019f6 Rob Herring 2019-11-07 139 sleep-hardware-state:
3af50e548019f6 Rob Herring 2019-11-07 140 type: boolean
3af50e548019f6 Rob Herring 2019-11-07 141 description: indicate this is sleep related state which will be
3af50e548019f6 Rob Herring 2019-11-07 142 programmed into the registers for the sleep state.
3af50e548019f6 Rob Herring 2019-11-07 143
3af50e548019f6 Rob Herring 2019-11-07 144 slew-rate:
3af50e548019f6 Rob Herring 2019-11-07 145 $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 146 description: set the slew rate
3af50e548019f6 Rob Herring 2019-11-07 147
3af50e548019f6 Rob Herring 2019-11-07 148 skew-delay:
3af50e548019f6 Rob Herring 2019-11-07 149 $ref: /schemas/types.yaml#/definitions/uint32
3af50e548019f6 Rob Herring 2019-11-07 150 description:
3af50e548019f6 Rob Herring 2019-11-07 151 this affects the expected clock skew on input pins
3af50e548019f6 Rob Herring 2019-11-07 152 and the delay before latching a value to an output
3af50e548019f6 Rob Herring 2019-11-07 153 pin. Typically indicates how many double-inverters are
3af50e548019f6 Rob Herring 2019-11-07 154 used to delay the signal.
6a0e321ea73569 Rob Herring 2020-10-05 155
5c284d086bcf3b Antonio Borneo 2025-10-23 156 skew-delay-input-ps:
5c284d086bcf3b Antonio Borneo 2025-10-23 157 description:
5c284d086bcf3b Antonio Borneo 2025-10-23 158 this affects the expected clock skew in ps on an input pin.
5c284d086bcf3b Antonio Borneo 2025-10-23 159
5c284d086bcf3b Antonio Borneo 2025-10-23 160 skew-delay-output-ps:
5c284d086bcf3b Antonio Borneo 2025-10-23 161 description:
5c284d086bcf3b Antonio Borneo 2025-10-23 162 this affects the expected delay in ps before latching a value to
5c284d086bcf3b Antonio Borneo 2025-10-23 163 an output pin.
5c284d086bcf3b Antonio Borneo 2025-10-23 164
1ed6a1e08e61d8 Conor Dooley 2025-11-21 165 allOf:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 166 - if:
5c284d086bcf3b Antonio Borneo 2025-10-23 167 required:
5c284d086bcf3b Antonio Borneo 2025-10-23 168 - skew-delay
5c284d086bcf3b Antonio Borneo 2025-10-23 169 then:
5c284d086bcf3b Antonio Borneo 2025-10-23 170 properties:
5c284d086bcf3b Antonio Borneo 2025-10-23 171 skew-delay-input-ps: false
5c284d086bcf3b Antonio Borneo 2025-10-23 172 skew-delay-output-ps: false
5c284d086bcf3b Antonio Borneo 2025-10-23 173
1ed6a1e08e61d8 Conor Dooley 2025-11-21 174 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 175 required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 176 - input-disable
1ed6a1e08e61d8 Conor Dooley 2025-11-21 177 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 178 properties:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 179 input-enable: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 180
1ed6a1e08e61d8 Conor Dooley 2025-11-21 181 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 182 required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 183 - output-disable
1ed6a1e08e61d8 Conor Dooley 2025-11-21 184 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 185 properties:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 186 output-enable: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 187 output-impedance-ohms: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 188
1ed6a1e08e61d8 Conor Dooley 2025-11-21 189 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 190 required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 191 - output-low
1ed6a1e08e61d8 Conor Dooley 2025-11-21 192 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 193 properties:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 194 output-high: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 195
1ed6a1e08e61d8 Conor Dooley 2025-11-21 196 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 197 required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 198 - low-power-enable
1ed6a1e08e61d8 Conor Dooley 2025-11-21 199 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 200 properties:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 201 low-power-disable: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 202
1ed6a1e08e61d8 Conor Dooley 2025-11-21 203 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 204 required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 205 - input-schmitt-disable
1ed6a1e08e61d8 Conor Dooley 2025-11-21 206 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 207 properties:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 208 input-schmitt-enable: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 209 input-schmitt-microvolt: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 210
1ed6a1e08e61d8 Conor Dooley 2025-11-21 211 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 @212 required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 213 - drive-strength
1ed6a1e08e61d8 Conor Dooley 2025-11-21 214 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 215 properties:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 216 drive-strength-microamp: false
1ed6a1e08e61d8 Conor Dooley 2025-11-21 217
1ed6a1e08e61d8 Conor Dooley 2025-11-21 218 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 219 anyOf:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 220 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 221 - drive-open-source
1ed6a1e08e61d8 Conor Dooley 2025-11-21 222 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 223 - drive-open-drain
1ed6a1e08e61d8 Conor Dooley 2025-11-21 224 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 225 - drive-push-pull
1ed6a1e08e61d8 Conor Dooley 2025-11-21 226 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 227 oneOf:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 228 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 229 - drive-open-source
1ed6a1e08e61d8 Conor Dooley 2025-11-21 230 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 231 - drive-open-drain
1ed6a1e08e61d8 Conor Dooley 2025-11-21 232 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 233 - drive-push-pull
1ed6a1e08e61d8 Conor Dooley 2025-11-21 234
1ed6a1e08e61d8 Conor Dooley 2025-11-21 235 - if:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 236 anyOf:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 237 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 238 - bias-disable
1ed6a1e08e61d8 Conor Dooley 2025-11-21 239 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 240 - bias-high-impedance
1ed6a1e08e61d8 Conor Dooley 2025-11-21 241 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 242 - bias-bus-hold
1ed6a1e08e61d8 Conor Dooley 2025-11-21 243 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 244 - bias-pull-up
1ed6a1e08e61d8 Conor Dooley 2025-11-21 245 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 246 - bias-pull-down
1ed6a1e08e61d8 Conor Dooley 2025-11-21 247 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 248 - bias-pull-pin-default
1ed6a1e08e61d8 Conor Dooley 2025-11-21 249 then:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 250 oneOf:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 251 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 252 - bias-disable
1ed6a1e08e61d8 Conor Dooley 2025-11-21 253 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 254 - bias-high-impedance
1ed6a1e08e61d8 Conor Dooley 2025-11-21 255 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 256 - bias-bus-hold
1ed6a1e08e61d8 Conor Dooley 2025-11-21 257 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 258 - bias-pull-up
1ed6a1e08e61d8 Conor Dooley 2025-11-21 259 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 260 - bias-pull-down
1ed6a1e08e61d8 Conor Dooley 2025-11-21 261 - required:
1ed6a1e08e61d8 Conor Dooley 2025-11-21 262 - bias-pull-pin-default
1ed6a1e08e61d8 Conor Dooley 2025-11-21 263
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next reply other threads:[~2025-12-31 17:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-31 17:19 kernel test robot [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-12-31 14:32 [conor:pinctrl 6/14] Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml:212:6: [warning] wrong indentation: expected 6 but found 5 (indentation) kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202512311812.OHJ6bED4-lkp@intel.com \
--to=lkp@intel.com \
--cc=oe-kbuild@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.