From: Jonas Jelonek <jelonek.jonas@gmail.com>
To: Russell King <linux@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bjørn Mork" <bjorn@mork.no>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Jonas Jelonek" <jelonek.jonas@gmail.com>
Subject: [PATCH v2] net: sfp: add SMBus I2C block support
Date: Mon, 5 Jan 2026 15:46:53 +0000 [thread overview]
Message-ID: <20260105154653.575397-1-jelonek.jonas@gmail.com> (raw)
Commit 7662abf4db94 ("net: phy: sfp: Add support for SMBus module access")
added support for SMBus-only controllers for module access. However,
this is restricted to single-byte accesses and has the implication that
hwmon is disabled (due to missing atomicity of 16-bit accesses) and
warnings are printed.
There are probably a lot of SMBus-only I2C controllers out in the wild
which support block reads. Right now, they don't work with SFP modules.
This applies - amongst others - to I2C/SMBus-only controllers in Realtek
longan and mango SoCs.
Downstream in OpenWrt, a patch similar to the abovementioned patch is
used for current LTS kernel 6.12. However, this uses byte-access for all
kinds of access and thus disregards the atomicity for wider access.
Introduce read/write SMBus I2C block operations to support SMBus-only
controllers with appropriate support for block read/write. Those
operations are used for all accesses if supported, otherwise the
single-byte operations will be used. With block reads, atomicity for
16-bit reads as required by hwmon is preserved and thus, hwmon can be
used.
The implementation requires the I2C_FUNC_SMBUS_I2C_BLOCK to be
supported as it relies on reading a pre-defined amount of bytes.
This isn't intended by the official SMBus Block Read but supported by
several I2C controllers/drivers.
Support for word access is not implemented due to issues regarding
endianness.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
---
v2: return number of written bytes in sfp_smbus_block_write
v1: https://lore.kernel.org/netdev/20251228213331.472887-1-jelonek.jonas@gmail.com/
---
drivers/net/phy/sfp.c | 77 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 75 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 6166e9196364..4f2175397534 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -744,6 +744,35 @@ static int sfp_smbus_byte_read(struct sfp *sfp, bool a2, u8 dev_addr,
return data - (u8 *)buf;
}
+static int sfp_smbus_block_read(struct sfp *sfp, bool a2, u8 dev_addr,
+ void *buf, size_t len)
+{
+ size_t block_size = sfp->i2c_block_size;
+ union i2c_smbus_data smbus_data;
+ u8 bus_addr = a2 ? 0x51 : 0x50;
+ u8 *data = buf;
+ u8 this_len;
+ int ret;
+
+ while (len) {
+ this_len = min(len, block_size);
+
+ smbus_data.block[0] = this_len;
+ ret = i2c_smbus_xfer(sfp->i2c, bus_addr, 0,
+ I2C_SMBUS_READ, dev_addr,
+ I2C_SMBUS_I2C_BLOCK_DATA, &smbus_data);
+ if (ret < 0)
+ return ret;
+
+ memcpy(data, &smbus_data.block[1], this_len);
+ len -= this_len;
+ data += this_len;
+ dev_addr += this_len;
+ }
+
+ return data - (u8 *)buf;
+}
+
static int sfp_smbus_byte_write(struct sfp *sfp, bool a2, u8 dev_addr,
void *buf, size_t len)
{
@@ -765,26 +794,70 @@ static int sfp_smbus_byte_write(struct sfp *sfp, bool a2, u8 dev_addr,
dev_addr++;
}
+ return data - (u8 *)buf;
+}
+
+static int sfp_smbus_block_write(struct sfp *sfp, bool a2, u8 dev_addr,
+ void *buf, size_t len)
+{
+ size_t block_size = sfp->i2c_block_size;
+ union i2c_smbus_data smbus_data;
+ u8 bus_addr = a2 ? 0x51 : 0x50;
+ u8 *data = buf;
+ u8 this_len;
+ int ret;
+
+ while (len) {
+ this_len = min(len, block_size);
+
+ smbus_data.block[0] = this_len;
+ memcpy(&smbus_data.block[1], data, this_len);
+ ret = i2c_smbus_xfer(sfp->i2c, bus_addr, 0,
+ I2C_SMBUS_WRITE, dev_addr,
+ I2C_SMBUS_I2C_BLOCK_DATA, &smbus_data);
+ if (ret)
+ return ret;
+
+ len -= this_len;
+ data += this_len;
+ dev_addr += this_len;
+ }
+
return 0;
}
static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
{
+ size_t max_block_size;
+
sfp->i2c = i2c;
if (i2c_check_functionality(i2c, I2C_FUNC_I2C)) {
sfp->read = sfp_i2c_read;
sfp->write = sfp_i2c_write;
- sfp->i2c_max_block_size = SFP_EEPROM_BLOCK_SIZE;
+ max_block_size = SFP_EEPROM_BLOCK_SIZE;
+ } else if (i2c_check_functionality(i2c, I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ sfp->read = sfp_smbus_block_read;
+ sfp->write = sfp_smbus_block_write;
+
+ max_block_size = SFP_EEPROM_BLOCK_SIZE;
+ if (i2c->quirks && i2c->quirks->max_read_len)
+ max_block_size = min(max_block_size,
+ i2c->quirks->max_read_len);
+ if (i2c->quirks && i2c->quirks->max_write_len)
+ max_block_size = min(max_block_size,
+ i2c->quirks->max_write_len);
+
} else if (i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA)) {
sfp->read = sfp_smbus_byte_read;
sfp->write = sfp_smbus_byte_write;
- sfp->i2c_max_block_size = 1;
+ max_block_size = 1;
} else {
sfp->i2c = NULL;
return -EINVAL;
}
+ sfp->i2c_max_block_size = max_block_size;
return 0;
}
base-commit: c303e8b86d9dbd6868f5216272973292f7f3b7f1
--
2.48.1
next reply other threads:[~2026-01-05 15:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-05 15:46 Jonas Jelonek [this message]
2026-01-05 15:49 ` [PATCH v2] net: sfp: add SMBus I2C block support Jonas Jelonek
2026-01-05 16:16 ` Russell King (Oracle)
2026-01-05 16:19 ` Jonas Jelonek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260105154653.575397-1-jelonek.jonas@gmail.com \
--to=jelonek.jonas@gmail.com \
--cc=andrew@lunn.ch \
--cc=bjorn@mork.no \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.