All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: brgl@kernel.org,andersson@kernel.org,bartosz.golaszewski@linaro.org,dmitry.baryshkov@oss.qualcomm.com,linusw@kernel.org,val@packett.cool
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pinctrl: qcom: lpass-lpi: mark the GPIO controller as" failed to apply to 6.1-stable tree
Date: Mon, 12 Jan 2026 11:44:36 +0100	[thread overview]
Message-ID: <2026011236-imaginary-sweep-d796@gregkh> (raw)


The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x ebc18e9854e5a2b62a041fb57b216a903af45b85
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026011236-imaginary-sweep-d796@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From ebc18e9854e5a2b62a041fb57b216a903af45b85 Mon Sep 17 00:00:00 2001
From: Bartosz Golaszewski <brgl@kernel.org>
Date: Wed, 26 Nov 2025 13:22:19 +0100
Subject: [PATCH] pinctrl: qcom: lpass-lpi: mark the GPIO controller as
 sleeping

The gpio_chip settings in this driver say the controller can't sleep
but it actually uses a mutex for synchronization. This triggers the
following BUG():

[    9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[    9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker)
[    9.233669] preempt_count: 1, expected: 0
[    9.233673] RCU nest depth: 0, expected: 0
[    9.233688] Tainted: [W]=WARN
[    9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025
[    9.233694] Call trace:
[    9.233696]  show_stack+0x24/0x38 (C)
[    9.233709]  dump_stack_lvl+0x40/0x88
[    9.233716]  dump_stack+0x18/0x24
[    9.233722]  __might_resched+0x148/0x160
[    9.233731]  __might_sleep+0x38/0x98
[    9.233736]  mutex_lock+0x30/0xd8
[    9.233749]  lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi]
[    9.233757]  lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi]
[    9.233761]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233772]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233779]  gpiod_direction_output+0x38/0xd0
[    9.233786]  gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy]
[    9.233792]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233799]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233806]  gpiod_configure_flags+0x2c0/0x580
[    9.233812]  gpiod_find_and_request+0x358/0x4f8
[    9.233819]  gpiod_get_index+0x7c/0x98
[    9.233826]  devm_gpiod_get+0x34/0xb0
[    9.233829]  reset_gpio_probe+0x58/0x128 [reset_gpio]
[    9.233836]  auxiliary_bus_probe+0xb0/0xf0
[    9.233845]  really_probe+0x14c/0x450
[    9.233853]  __driver_probe_device+0xb0/0x188
[    9.233858]  driver_probe_device+0x4c/0x250
[    9.233863]  __driver_attach+0xf8/0x2a0
[    9.233868]  bus_for_each_dev+0xf8/0x158
[    9.233872]  driver_attach+0x30/0x48
[    9.233876]  bus_add_driver+0x158/0x2b8
[    9.233880]  driver_register+0x74/0x118
[    9.233886]  __auxiliary_driver_register+0x94/0xe8
[    9.233893]  init_module+0x34/0xfd0 [reset_gpio]
[    9.233898]  do_one_initcall+0xec/0x300
[    9.233903]  do_init_module+0x64/0x260
[    9.233910]  load_module+0x16c4/0x1900
[    9.233915]  __arm64_sys_finit_module+0x24c/0x378
[    9.233919]  invoke_syscall+0x4c/0xe8
[    9.233925]  el0_svc_common+0x8c/0xf0
[    9.233929]  do_el0_svc+0x28/0x40
[    9.233934]  el0_svc+0x38/0x100
[    9.233938]  el0t_64_sync_handler+0x84/0x130
[    9.233943]  el0t_64_sync+0x17c/0x180

Mark the controller as sleeping.

Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 1c97ec44aa5f..78212f992843 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -498,7 +498,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
 	pctrl->chip.base = -1;
 	pctrl->chip.ngpio = data->npins;
 	pctrl->chip.label = dev_name(dev);
-	pctrl->chip.can_sleep = false;
+	pctrl->chip.can_sleep = true;
 
 	mutex_init(&pctrl->lock);
 


             reply	other threads:[~2026-01-12 10:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-12 10:44 gregkh [this message]
2026-01-12 10:50 ` [PATCH 6.1.y 5.15.y] pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping Bartosz Golaszewski
2026-01-12 11:00   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026011236-imaginary-sweep-d796@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=andersson@kernel.org \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=brgl@kernel.org \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=linusw@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=val@packett.cool \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.