All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raju Rangoju <Raju.Rangoju@amd.com>
To: <netdev@vger.kernel.org>
Cc: <pabeni@redhat.com>, <kuba@kernel.org>, <edumazet@google.com>,
	<davem@davemloft.net>, <andrew+netdev@lunn.ch>,
	<Shyam-sundar.S-k@amd.com>, Vishal Badole <Vishal.Badole@amd.com>,
	Raju Rangoju <Raju.Rangoju@amd.com>
Subject: [PATCH net-next v3] xgbe: Use netlink extack to report errors to ethtool
Date: Wed, 14 Jan 2026 13:33:57 +0530	[thread overview]
Message-ID: <20260114080357.1778132-1-Raju.Rangoju@amd.com> (raw)

From: Vishal Badole <Vishal.Badole@amd.com>

Upgrade XGBE driver to report errors via netlink extack instead
of netdev_error so ethtool userspace can be aware of failures.

Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
Changes since v2:
 - Add missing Signed-off-by tag
Changes since v1:
 - Remove \n at the end of the extack string
 - Don't use _FMT if there's no formatting going on

 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 49 +++++++++++---------
 1 file changed, 27 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index 0d19b09497a0..46b69166e74a 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -362,13 +362,16 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 
 	/* Check the bounds of values for Rx */
 	if (rx_riwt > XGMAC_MAX_DMA_RIWT) {
-		netdev_err(netdev, "rx-usec is limited to %d usecs\n",
-			   hw_if->riwt_to_usec(pdata, XGMAC_MAX_DMA_RIWT));
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx-usec is limited to %d usecs",
+				       hw_if->riwt_to_usec(pdata,
+							   XGMAC_MAX_DMA_RIWT));
 		return -EINVAL;
 	}
 	if (rx_frames > pdata->rx_desc_count) {
-		netdev_err(netdev, "rx-frames is limited to %d frames\n",
-			   pdata->rx_desc_count);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx-frames is limited to %d frames",
+				       pdata->rx_desc_count);
 		return -EINVAL;
 	}
 
@@ -377,8 +380,7 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 
 	/* Check the bounds of values for Tx */
 	if (!tx_usecs) {
-		NL_SET_ERR_MSG_FMT_MOD(extack,
-				       "tx-usecs must not be 0");
+		NL_SET_ERR_MSG_MOD(extack, "tx-usecs must not be 0");
 		return -EINVAL;
 	}
 	if (tx_usecs > XGMAC_MAX_COAL_TX_TICK) {
@@ -387,8 +389,9 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 		return -EINVAL;
 	}
 	if (tx_frames > pdata->tx_desc_count) {
-		netdev_err(netdev, "tx-frames is limited to %d frames\n",
-			   pdata->tx_desc_count);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "tx-frames is limited to %d frames",
+				       pdata->tx_desc_count);
 		return -EINVAL;
 	}
 
@@ -474,7 +477,7 @@ static int xgbe_set_rxfh(struct net_device *netdev,
 
 	if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE &&
 	    rxfh->hfunc != ETH_RSS_HASH_TOP) {
-		netdev_err(netdev, "unsupported hash function\n");
+		NL_SET_ERR_MSG_MOD(extack, "unsupported hash function");
 		return -EOPNOTSUPP;
 	}
 
@@ -561,37 +564,39 @@ static int xgbe_set_ringparam(struct net_device *netdev,
 	unsigned int rx, tx;
 
 	if (ringparam->rx_mini_pending || ringparam->rx_jumbo_pending) {
-		netdev_err(netdev, "unsupported ring parameter\n");
+		NL_SET_ERR_MSG_MOD(extack, "unsupported ring parameter");
 		return -EINVAL;
 	}
 
 	if ((ringparam->rx_pending < XGBE_RX_DESC_CNT_MIN) ||
 	    (ringparam->rx_pending > XGBE_RX_DESC_CNT_MAX)) {
-		netdev_err(netdev,
-			   "rx ring parameter must be between %u and %u\n",
-			   XGBE_RX_DESC_CNT_MIN, XGBE_RX_DESC_CNT_MAX);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx ring parameter must be between %u and %u",
+				       XGBE_RX_DESC_CNT_MIN,
+				       XGBE_RX_DESC_CNT_MAX);
 		return -EINVAL;
 	}
 
 	if ((ringparam->tx_pending < XGBE_TX_DESC_CNT_MIN) ||
 	    (ringparam->tx_pending > XGBE_TX_DESC_CNT_MAX)) {
-		netdev_err(netdev,
-			   "tx ring parameter must be between %u and %u\n",
-			   XGBE_TX_DESC_CNT_MIN, XGBE_TX_DESC_CNT_MAX);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "tx ring parameter must be between %u and %u",
+				       XGBE_TX_DESC_CNT_MIN,
+				       XGBE_TX_DESC_CNT_MAX);
 		return -EINVAL;
 	}
 
 	rx = __rounddown_pow_of_two(ringparam->rx_pending);
 	if (rx != ringparam->rx_pending)
-		netdev_notice(netdev,
-			      "rx ring parameter rounded to power of two: %u\n",
-			      rx);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx ring parameter rounded to power of two: %u",
+				       rx);
 
 	tx = __rounddown_pow_of_two(ringparam->tx_pending);
 	if (tx != ringparam->tx_pending)
-		netdev_notice(netdev,
-			      "tx ring parameter rounded to power of two: %u\n",
-			      tx);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "tx ring parameter rounded to power of two: %u",
+				       tx);
 
 	if ((rx == pdata->rx_desc_count) &&
 	    (tx == pdata->tx_desc_count))
-- 
2.34.1


             reply	other threads:[~2026-01-14  8:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-14  8:03 Raju Rangoju [this message]
2026-01-16  4:04 ` [PATCH net-next v3] xgbe: Use netlink extack to report errors to ethtool Jakub Kicinski
2026-01-16  4:10 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260114080357.1778132-1-Raju.Rangoju@amd.com \
    --to=raju.rangoju@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=Vishal.Badole@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.