Re: [PATCH] clk: vf610: Add support for the Ethernet switch clocks

["Łukasz Majewski" <lukma@nabladev.com>]

Hi Andrew,

> On Thu, Jan 22, 2026 at 02:06:49PM +0100, Lukasz Majewski wrote:
> > The vf610 device has built in the MoreThanIP L2 switch. For proper
> > operation it is required to enable ESW and MAC table lookup
> > clocks.
> > 
> > The MAC table spans from 0x400E_C000 for 0x4000 and it is necessary
> > to provide clocks for each AIPS1-"slot", which size is 0x1000
> > (hence four separate entries).
> > 
> > Those can be enabled via clock gating CCM_CCGR10 register
> > (0x4006_B068).  
> 
> Sorry, i lost track of the state of the switch driver.

New year, new MTIP L2 switch patches in preparation :-)

> Is there also a
> patch to add consumers of these clocks?

In short - this patch set is a preparatory one for vf610 SoC support of
the MTIP L2 switch.

Those changes describe more thoroughly the clock subsystem of this SoC.

> 
> > Signed-off-by: Lukasz Majewski <lukma@nabladev.com>  
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> 
>     Andrew

-- 
Best regards,

Lukasz Majewski

--
Nabla Software Engineering GmbH
HRB 40522 Augsburg
Phone: +49 821 45592596
E-Mail: office@nabladev.com
Managing Director : Stefano Babic