[PATCH v1 04/11] arm: dts: capricorn: move fec2 config

[Heiko Schocher <hs@nabladev.com>]

From: Lukas Stockmann <lukas.stockmann@siemens.com>

fec2 config does not belong to the Capricorn CPU module, move it to
the main board.

Signed-off-by: Lukas Stockmann <lukas.stockmann@siemens.com>
Signed-off-by: Heiko Schocher <hs@nabladev.com>
---

 arch/arm/dts/imx8-capricorn-cxg3.dts | 44 ++++++++++++++++++++++++++++
 arch/arm/dts/imx8-capricorn.dtsi     | 44 ----------------------------
 2 files changed, 44 insertions(+), 44 deletions(-)

diff --git a/arch/arm/dts/imx8-capricorn-cxg3.dts b/arch/arm/dts/imx8-capricorn-cxg3.dts
index 2f8597579f3..b40410b2b6f 100644
--- a/arch/arm/dts/imx8-capricorn-cxg3.dts
+++ b/arch/arm/dts/imx8-capricorn-cxg3.dts
@@ -102,6 +102,26 @@
 	pinctrl-0 = <&pinctrl_gpio_keys>;
 
 	muxcgrp: imx8qxp-som {
+		pinctrl_fec2: fec2grp {
+			fsl,pins = <
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD	0x000014a0
+				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD	0x000014a0
+				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD		0x000514a0
+
+				SC_P_ENET0_MDC_CONN_ENET1_MDC			0x00000060
+				SC_P_ENET0_MDIO_CONN_ENET1_MDIO			0x00000060
+
+				SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_IN		0x00000060
+				SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000060
+				SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1	0x00000060
+				SC_P_ESAI0_TX2_RX3_CONN_ENET1_RMII_RX_ER	0x00000060
+				SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000060
+				SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0	0x00000060
+				SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1	0x00000060
+				SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000060
+			>;
+		};
+
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
 			SC_P_ESAI0_FST_LSIO_GPIO0_IO01		0x06000021
@@ -127,3 +147,27 @@
 		>;
 	};
 };
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rmii";
+
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/dts/imx8-capricorn.dtsi b/arch/arm/dts/imx8-capricorn.dtsi
index 41f4b2f646b..f640daa775f 100644
--- a/arch/arm/dts/imx8-capricorn.dtsi
+++ b/arch/arm/dts/imx8-capricorn.dtsi
@@ -65,26 +65,6 @@
 				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
 			>;
 		};
-
-		pinctrl_fec2: fec2grp {
-			fsl,pins = <
-				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD	0x000014a0
-				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD	0x000014a0
-				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD		0x000514a0
-
-				SC_P_ENET0_MDC_CONN_ENET1_MDC                   0x00000060
-				SC_P_ENET0_MDIO_CONN_ENET1_MDIO                 0x00000060
-
-				SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_IN            0x00000060
-				SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0            0x00000060
-				SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1        0x00000060
-				SC_P_ESAI0_TX2_RX3_CONN_ENET1_RMII_RX_ER        0x00000060
-				SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL          0x00000060
-				SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0        0x00000060
-				SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1        0x00000060
-				SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL         0x00000060	/* ERST: Reset pin */
-			>;
-		};
 	};
 };
 
@@ -146,27 +126,3 @@
 &fec1 {
 	status ="disabled";
 };
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec2>;
-	phy-mode = "rmii";
-
-	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-- 
2.20.1