From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH v2 1/1] mtd: cfi_cmdset_0001: Factor out do_write_buffer_locked() to reduce stack frame
Date: Sat, 24 Jan 2026 14:35:56 +0100 [thread overview]
Message-ID: <20260124133730.3454241-1-andriy.shevchenko@linux.intel.com> (raw)
Compiler is not happy about used stack frame:
drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer':
drivers/mtd/chips/cfi_cmdset_0001.c:1887:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Fix this by factoring out do_write_buffer_locked().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: left ENABLE_VPP() and XIP_INVAL_CACHED_RANGE() where they were originally
drivers/mtd/chips/cfi_cmdset_0001.c | 82 +++++++++++++++++------------
1 file changed, 48 insertions(+), 34 deletions(-)
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index c10693ba265b..c495bee04053 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1720,42 +1720,24 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le
}
-static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const struct kvec **pvec,
- unsigned long *pvec_seek, int len)
+static int __xipram do_write_buffer_locked(struct map_info *map, struct flchip *chip,
+ unsigned long cmd_adr, unsigned long adr,
+ const struct kvec **pvec,
+ unsigned long *pvec_seek, int len)
{
struct cfi_private *cfi = map->fldrv_priv;
map_word status, write_cmd, datum;
- unsigned long cmd_adr;
- int ret, wbufsize, word_gap, words;
+ int ret, word_gap, words;
const struct kvec *vec;
unsigned long vec_seek;
unsigned long initial_adr;
int initial_len = len;
- wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
- adr += chip->start;
initial_adr = adr;
- cmd_adr = adr & ~(wbufsize-1);
-
- /* Sharp LH28F640BF chips need the first address for the
- * Page Buffer Program command. See Table 5 of
- * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
- if (is_LH28F640BF(cfi))
- cmd_adr = adr;
/* Let's determine this according to the interleave only once */
write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, cmd_adr, FL_WRITING);
- if (ret) {
- mutex_unlock(&chip->mutex);
- return ret;
- }
-
- XIP_INVAL_CACHED_RANGE(map, initial_adr, initial_len);
- ENABLE_VPP(map);
xip_disable(map, chip, cmd_adr);
/* §4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set
@@ -1789,7 +1771,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
xip_enable(map, chip, cmd_adr);
printk(KERN_ERR "%s: Chip not ready for buffer write. Xstatus = %lx, status = %lx\n",
map->name, Xstatus.x[0], status.x[0]);
- goto out;
+ return ret;
}
/* Figure out the number of words to write */
@@ -1853,7 +1835,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
chip->state = FL_STATUS;
xip_enable(map, chip, cmd_adr);
printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name);
- goto out;
+ return ret;
}
/* check for errors */
@@ -1866,21 +1848,53 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
map_write(map, CMD(0x70), cmd_adr);
xip_enable(map, chip, cmd_adr);
- if (chipstatus & 0x02) {
- ret = -EROFS;
- } else if (chipstatus & 0x08) {
+ if (chipstatus & 0x02)
+ return -EROFS;
+
+ if (chipstatus & 0x08) {
printk(KERN_ERR "%s: buffer write error (bad VPP)\n", map->name);
- ret = -EIO;
- } else {
- printk(KERN_ERR "%s: buffer write error (status 0x%lx)\n", map->name, chipstatus);
- ret = -EINVAL;
+ return -EIO;
}
- goto out;
+ printk(KERN_ERR "%s: buffer write error (status 0x%lx)\n", map->name, chipstatus);
+ return -EINVAL;
}
xip_enable(map, chip, cmd_adr);
- out: DISABLE_VPP(map);
+ return 0;
+}
+
+static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ unsigned long adr, const struct kvec **pvec,
+ unsigned long *pvec_seek, int len)
+{
+ struct cfi_private *cfi = map->fldrv_priv;
+ unsigned long cmd_adr;
+ int ret, wbufsize;
+
+ wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
+ adr += chip->start;
+ cmd_adr = adr & ~(wbufsize - 1);
+
+ /* Sharp LH28F640BF chips need the first address for the
+ * Page Buffer Program command. See Table 5 of
+ * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+ if (is_LH28F640BF(cfi))
+ cmd_adr = adr;
+
+ mutex_lock(&chip->mutex);
+ ret = get_chip(map, chip, cmd_adr, FL_WRITING);
+ if (ret) {
+ mutex_unlock(&chip->mutex);
+ return ret;
+ }
+
+ XIP_INVAL_CACHED_RANGE(map, adr, len);
+ ENABLE_VPP(map);
+
+ ret = do_write_buffer_locked(map, chip, cmd_adr, adr, pvec, pvec_seek, len);
+
+ DISABLE_VPP(map);
put_chip(map, chip, cmd_adr);
mutex_unlock(&chip->mutex);
return ret;
--
2.50.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2026-01-24 13:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-24 13:35 Andy Shevchenko [this message]
2026-01-24 22:41 ` [PATCH v2 1/1] mtd: cfi_cmdset_0001: Factor out do_write_buffer_locked() to reduce stack frame kernel test robot
2026-01-24 22:41 ` kernel test robot
2026-02-10 10:05 ` Vignesh Raghavendra
2026-02-10 14:45 ` Andy Shevchenko
-- strict thread matches above, loose matches on Subject: below --
2026-02-04 1:25 Andy Shevchenko
2026-02-04 21:12 ` Andy Shevchenko
2026-02-05 8:51 ` Miquel Raynal
2026-02-05 15:57 ` Andy Shevchenko
2026-02-05 17:34 ` Miquel Raynal
2026-02-06 5:56 ` Vignesh Raghavendra
2026-02-06 7:44 ` Andy Shevchenko
2026-04-08 6:35 ` Lukas Wunner
2026-04-08 11:27 ` Andy Shevchenko
2026-04-08 13:40 ` Lukas Wunner
2026-04-08 14:33 ` Andy Shevchenko
2026-04-08 21:17 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260124133730.3454241-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.