From: Rob Herring <robh@kernel.org>
To: Svyatoslav Ryhel <clamor95@gmail.com>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Lee Jones" <lee@kernel.org>, "Pavel Machek" <pavel@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Dixit Parmar" <dixitparmar19@gmail.com>,
"Tony Lindgren" <tony@atomide.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-leds@vger.kernel.org, linux-rtc@vger.kernel.org
Subject: Re: [PATCH v1 08/10] dt-bindings: mfg: motorola-cpcap: convert to schema
Date: Mon, 26 Jan 2026 08:37:45 -0600 [thread overview]
Message-ID: <20260126143745.GA2279290-robh@kernel.org> (raw)
In-Reply-To: <20260125134302.45958-9-clamor95@gmail.com>
On Sun, Jan 25, 2026 at 03:43:00PM +0200, Svyatoslav Ryhel wrote:
> Convert devicetree bindings for the Motorola CPCAP MFD from TXT to YAML.
> Audio codec bindings adjusted with common ports node for port@0 and
> port@1. Added compatible for Mot board CPCAP. Other bindings remain the
> same.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/mfd/motorola,cpcap.yaml | 389 ++++++++++++++++++
> .../bindings/mfd/motorola-cpcap.txt | 78 ----
> 2 files changed, 389 insertions(+), 78 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
> new file mode 100644
> index 000000000000..f75f884c7b3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
> @@ -0,0 +1,389 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/motorola,cpcap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Motorola CPCAP PMIC MFD
> +
> +maintainers:
> + - Svyatoslav Ryhel <clamor95@gmail.com>
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - motorola,cpcap
> + - st,6556002
> + - motorola,mapphone-cpcap
> + - motorola,mot-cpcap
Adding new compatibles should be a separate patch unless they have
already been in use.
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 2
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + spi-max-frequency:
> + maximum: 8000000
> +
> + spi-cs-high: true
> +
> + adc:
> + $ref: /schemas/iio/adc/motorola,cpcap-adc.yaml
> +
> + audio-codec:
> + type: object
additionalProperties: false
> +
> + properties:
> + interrupts:
> + items:
> + - description: headset detect interrupt
> + - description: microphone bias 2 detect interrupt
> +
> + interrupt-names:
> + items:
> + - const: hs
> + - const: mb2
> +
> + "#sound-dai-cells":
> + const: 1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description: The audio-codec provides two DAIs. The first one is
> + connected to the Stereo HiFi DAC and the second one is connected
> + to the Voice DAC.
You need to define each port in the schema.
> +
> + required:
> + - interrupts
> + - interrupt-names
> + - "#sound-dai-cells"
> +
> + battery:
> + $ref: /schemas/power/supply/cpcap-battery.yaml
> +
> + charger:
> + $ref: /schemas/power/supply/cpcap-charger.yaml
> +
> + key-power:
> + $ref: /schemas/input/motorola,cpcap-pwrbutton.yaml
> +
> + phy:
> + $ref: /schemas/phy/motorola,cpcap-usb-phy.yaml
> +
> + regulator:
> + $ref: /schemas/regulator/motorola,cpcap-regulator.yaml
> +
> + rtc:
> + $ref: /schemas/rtc/motorola,cpcap-rtc.yaml
> +
> +patternProperties:
> + "^led(-[a-z]+)?$":
> + $ref: /schemas/leds/motorola,cpcap-leds.yaml
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/input/linux-event-codes.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpcap: pmic@0 {
> + compatible = "motorola,cpcap";
> + reg = <0>; /* cs0 */
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + spi-max-frequency = <3000000>;
> + spi-cs-high;
> +
> + cpcap_adc: adc {
> + compatible = "motorola,cpcap-adc";
> +
> + interrupt-parent = <&cpcap>;
> + interrupts = <8 IRQ_TYPE_NONE>;
> + interrupt-names = "adcdone";
> +
> + #io-channel-cells = <1>;
> + };
> +
> + cpcap_audio: audio-codec {
> + interrupt-parent = <&cpcap>;
> + interrupts = <9 IRQ_TYPE_NONE>, <10 IRQ_TYPE_NONE>;
> + interrupt-names = "hs", "mb2";
> +
> + #sound-dai-cells = <1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* HiFi */
> + port@0 {
> + reg = <0>;
> + cpcap_audio_codec0: endpoint {
> + };
> + };
> +
> + /* Voice */
> + port@1 {
> + reg = <1>;
> + cpcap_audio_codec1: endpoint {
> + };
> + };
> + };
> + };
> +
> + cpcap_battery: battery {
> + compatible = "motorola,cpcap-battery";
> +
> + interrupt-parent = <&cpcap>;
> + interrupts = <6 IRQ_TYPE_NONE>, <5 IRQ_TYPE_NONE>,
> + <3 IRQ_TYPE_NONE>, <20 IRQ_TYPE_NONE>,
> + <54 IRQ_TYPE_NONE>, <57 IRQ_TYPE_NONE>;
> + interrupt-names = "eol", "lowbph", "lowbpl",
> + "chrgcurr1", "battdetb", "cccal";
> +
> + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
> + <&cpcap_adc 5>, <&cpcap_adc 6>;
> + io-channel-names = "battdetb", "battp",
> + "chg_isense", "batti";
> + power-supplies = <&cpcap_charger>;
> + };
> +
> + cpcap_charger: charger {
> + compatible = "motorola,mapphone-cpcap-charger";
> +
> + interrupt-parent = <&cpcap>;
> + interrupts = <13 IRQ_TYPE_NONE>, <12 IRQ_TYPE_NONE>,
> + <29 IRQ_TYPE_NONE>, <28 IRQ_TYPE_NONE>,
> + <22 IRQ_TYPE_NONE>, <21 IRQ_TYPE_NONE>,
> + <20 IRQ_TYPE_NONE>, <19 IRQ_TYPE_NONE>,
> + <54 IRQ_TYPE_NONE>;
> + interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b",
> + "se0conn", "rvrs_mode", "chrgcurr2",
> + "chrgcurr1", "vbusvld", "battdetb";
> +
> + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
> + <&gpio3 23 GPIO_ACTIVE_LOW>;
> +
> + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
> + <&cpcap_adc 2>, <&cpcap_adc 5>,
> + <&cpcap_adc 6>;
> + io-channel-names = "battdetb", "battp",
> + "vbus", "chg_isense",
> + "batti";
> + };
> +
> + key-power {
> + compatible = "motorola,cpcap-pwrbutton";
> +
> + interrupt-parent = <&cpcap>;
> + interrupts = <23 IRQ_TYPE_NONE>;
> + };
> +
> + led-red {
> + compatible = "motorola,cpcap-led-red";
> + vdd-supply = <&vdd_led>;
> + label = "status-led::red";
> + };
> +
> + led-green {
> + compatible = "motorola,cpcap-led-green";
> + vdd-supply = <&vdd_led>;
> + label = "status-led::green";
> + };
> +
> + led-blue {
> + compatible = "motorola,cpcap-led-blue";
> + vdd-supply = <&vdd_led>;
> + label = "status-led::blue";
> + };
> +
> + cpcap_usb2_phy: phy {
> + compatible = "motorola,mapphone-cpcap-usb-phy";
> +
> + pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>;
> + pinctrl-1 = <&usb_ulpi_pins>;
> + pinctrl-2 = <&usb_utmi_pins>;
> + pinctrl-3 = <&uart3_pins>;
> + pinctrl-names = "default", "ulpi", "utmi", "uart";
> + #phy-cells = <0>;
> +
> + interrupts-extended =
> + <&cpcap 15 IRQ_TYPE_NONE>, <&cpcap 14 IRQ_TYPE_NONE>,
> + <&cpcap 28 IRQ_TYPE_NONE>, <&cpcap 19 IRQ_TYPE_NONE>,
> + <&cpcap 18 IRQ_TYPE_NONE>, <&cpcap 17 IRQ_TYPE_NONE>,
> + <&cpcap 16 IRQ_TYPE_NONE>, <&cpcap 49 IRQ_TYPE_NONE>,
> + <&cpcap 48 IRQ_TYPE_NONE>;
> + interrupt-names = "id_ground", "id_float", "se0conn",
> + "vbusvld", "sessvld", "sessend",
> + "se1", "dm", "dp";
> +
> + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
> + <&gpio1 0 GPIO_ACTIVE_HIGH>;
> +
> + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
> + io-channel-names = "vbus", "id";
> +
> + vusb-supply = <&avdd_usb>;
> + };
> +
> + regulator {
> + compatible = "motorola,cpcap-regulator";
> +
> + regulators {
> + vdd_cpu: SW1 {
> + regulator-name = "vdd_cpu";
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1125000>;
> + regulator-enable-ramp-delay = <1500>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_core: SW2 {
> + regulator-name = "vdd_core";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-enable-ramp-delay = <1500>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_1v8_vio: SW3 {
> + regulator-name = "vdd_1v8_vio";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_aon: SW4 {
> + regulator-name = "vdd_aon";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-enable-ramp-delay = <1500>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_led: SW5 {
> + regulator-name = "vdd_led";
> + regulator-min-microvolt = <5050000>;
> + regulator-max-microvolt = <5050000>;
> + regulator-enable-ramp-delay = <1500>;
> + regulator-boot-on;
> + };
> +
> + vdd_hvio: VHVIO {
> + regulator-name = "vdd_hvio";
> + regulator-min-microvolt = <2775000>;
> + regulator-max-microvolt = <2775000>;
> + regulator-enable-ramp-delay = <1000>;
> + };
> +
> + vcore_emmc: VSDIO {
> + regulator-name = "vcore_emmc";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + avdd_dsi_csi: VCSI {
> + regulator-name = "avdd_dsi_csi";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-enable-ramp-delay = <1000>;
> + regulator-boot-on;
> + };
> +
> + avdd_3v3_periph: VWLAN2 {
> + regulator-name = "avdd_3v3_periph";
> + regulator-min-microvolt = <2775000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <1000>;
> + regulator-boot-on;
> + };
> +
> + vddio_usd: VSIMCARD {
> + regulator-name = "vddio_usd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2900000>;
> + regulator-enable-ramp-delay = <1000>;
> + regulator-boot-on;
> + };
> +
> + vdd_haptic: VVIB {
> + regulator-name = "vdd_haptic";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <1000>;
> + };
> +
> + avdd_usb: VUSB {
> + regulator-name = "avdd_usb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + VAUDIO {
> + regulator-name = "vdd_audio";
> + regulator-min-microvolt = <2775000>;
> + regulator-max-microvolt = <2775000>;
> + regulator-enable-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> +
> + cpcap_rtc: rtc {
> + compatible = "motorola,cpcap-rtc";
> +
> + interrupt-parent = <&cpcap>;
> + interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
> + };
> + };
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
> deleted file mode 100644
> index 18c3fc26ca93..000000000000
> --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -Motorola CPCAP PMIC device tree binding
> -
> -Required properties:
> -- compatible : One or both of "motorola,cpcap" or "ste,6556002"
> -- reg : SPI chip select
> -- interrupts : The interrupt line the device is connected to
> -- interrupt-controller : Marks the device node as an interrupt controller
> -- #interrupt-cells : The number of cells to describe an IRQ, should be 2
> -- #address-cells : Child device offset number of cells, should be 1
> -- #size-cells : Child device size number of cells, should be 0
> -- spi-max-frequency : Typically set to 3000000
> -- spi-cs-high : SPI chip select direction
> -
> -Optional subnodes:
> -
> -The sub-functions of CPCAP get their own node with their own compatible values,
> -which are described in the following files:
> -
> -- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
> -- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
> -- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
> -- Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> -- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
> -- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
> -- Documentation/devicetree/bindings/leds/leds-cpcap.txt
> -- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
> -
> -The only exception is the audio codec. Instead of a compatible value its
> -node must be named "audio-codec".
> -
> -Required properties for the audio-codec subnode:
> -
> -- #sound-dai-cells = <1>;
> -- interrupts : should contain jack detection interrupts, with headset
> - detect interrupt matching "hs" and microphone bias 2
> - detect interrupt matching "mb2" in interrupt-names.
> -- interrupt-names : Contains "hs", "mb2"
> -
> -The audio-codec provides two DAIs. The first one is connected to the
> -Stereo HiFi DAC and the second one is connected to the Voice DAC.
> -
> -Example:
> -
> -&mcspi1 {
> - cpcap: pmic@0 {
> - compatible = "motorola,cpcap", "ste,6556002";
> - reg = <0>; /* cs0 */
> - interrupt-parent = <&gpio1>;
> - interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - spi-max-frequency = <3000000>;
> - spi-cs-high;
> -
> - audio-codec {
> - #sound-dai-cells = <1>;
> - interrupts-extended = <&cpcap 9 0>, <&cpcap 10 0>;
> - interrupt-names = "hs", "mb2";
> -
> - /* HiFi */
> - port@0 {
> - endpoint {
> - remote-endpoint = <&cpu_dai1>;
> - };
> - };
> -
> - /* Voice */
> - port@1 {
> - endpoint {
> - remote-endpoint = <&cpu_dai2>;
> - };
> - };
> - };
> - };
> -};
> -
> --
> 2.51.0
>
next prev parent reply other threads:[~2026-01-26 14:37 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-25 13:42 [PATCH v1 00/10] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
2026-01-25 13:42 ` [PATCH v1 01/10] dt-bindings: regulator: cpcap-regulator: convert to schema Svyatoslav Ryhel
2026-01-31 19:46 ` David Lechner
2026-01-31 19:55 ` David Lechner
2026-02-01 7:01 ` Svyatoslav Ryhel
2026-02-01 7:01 ` Svyatoslav Ryhel
2026-01-25 13:42 ` [PATCH v1 02/10] regulator: cpcap-regulator: add support for Mot regulators Svyatoslav Ryhel
2026-01-26 10:10 ` Andy Shevchenko
2026-01-26 10:13 ` Svyatoslav Ryhel
2026-01-26 11:50 ` Andy Shevchenko
2026-01-25 13:42 ` [PATCH v1 03/10] dt-bindings: iio: adc: cpcap-adc: document Mot ADC Svyatoslav Ryhel
2026-01-31 19:48 ` David Lechner
2026-01-31 19:50 ` David Lechner
2026-02-06 13:31 ` Rob Herring (Arm)
2026-01-25 13:42 ` [PATCH v1 04/10] iio: adc: cpcap-adc: add support for " Svyatoslav Ryhel
2026-01-26 10:11 ` Andy Shevchenko
2026-01-25 13:42 ` [PATCH v1 05/10] dt-bindings: leds: leds-cpcap: convert to schema Svyatoslav Ryhel
2026-01-31 19:59 ` David Lechner
2026-02-06 13:33 ` Rob Herring (Arm)
2026-01-25 13:42 ` [PATCH v1 06/10] dt-bindings: rtc: cpcap-rtc: " Svyatoslav Ryhel
2026-01-25 16:28 ` Rob Herring (Arm)
2026-01-30 22:59 ` (subset) " Alexandre Belloni
2026-01-25 13:42 ` [PATCH v1 07/10] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
2026-01-25 16:43 ` Rob Herring (Arm)
2026-01-31 20:02 ` David Lechner
2026-02-01 7:07 ` Svyatoslav Ryhel
2026-02-03 15:01 ` Rob Herring
2026-02-03 15:03 ` Svyatoslav Ryhel
2026-01-25 13:43 ` [PATCH v1 08/10] dt-bindings: mfg: motorola-cpcap: " Svyatoslav Ryhel
2026-01-26 14:37 ` Rob Herring [this message]
2026-01-31 20:07 ` David Lechner
2026-02-01 7:09 ` Svyatoslav Ryhel
2026-01-25 13:43 ` [PATCH v1 09/10] mfd: motorola-cpcap: diverge configuration per-board Svyatoslav Ryhel
2026-01-26 10:13 ` Andy Shevchenko
2026-01-26 10:14 ` Svyatoslav Ryhel
2026-01-25 13:43 ` [PATCH v1 10/10] mfd: motorola-cpcap: add support for Mot CPCAP composition Svyatoslav Ryhel
-- strict thread matches above, loose matches on Subject: below --
2026-01-29 20:48 [PATCH v1 08/10] dt-bindings: mfg: motorola-cpcap: convert to schema kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260126143745.GA2279290-robh@kernel.org \
--to=robh@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andy@kernel.org \
--cc=broonie@kernel.org \
--cc=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dixitparmar19@gmail.com \
--cc=dlechner@baylibre.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=pavel@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.