[PATCH v5 04/10] iommu/tegra241-cmdqv: Restore PROD and CONS after resume

[Pranjal Shrivastava <praan@google.com>]

From: Ashish Mhetre <amhetre@nvidia.com>

PROD and CONS indices for vcmdqs are getting set to 0 after resume.
Because of this the vcmdq is not consuming commands after resume.
Fix this by restoring PROD and CONS indices after resume from
saved pointers.

Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
---
 drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c b/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
index 38d637fde86e..6a951386baad 100644
--- a/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
+++ b/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
@@ -507,6 +507,8 @@ static int tegra241_vcmdq_hw_init(struct tegra241_vcmdq *vcmdq)
 
 	/* Configure and enable VCMDQ */
 	writeq_relaxed(vcmdq->cmdq.q.q_base, REG_VCMDQ_PAGE1(vcmdq, BASE));
+	writel_relaxed(vcmdq->cmdq.q.llq.prod, REG_VCMDQ_PAGE0(vcmdq, PROD));
+	writel_relaxed(vcmdq->cmdq.q.llq.cons, REG_VCMDQ_PAGE0(vcmdq, CONS));
 
 	ret = vcmdq_write_config(vcmdq, VCMDQ_EN);
 	if (ret) {
-- 
2.52.0.457.g6b5491de43-goog