From: Niklas Cassel <cassel@kernel.org>
To: "Manivannan Sadhasivam" <mani@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Jonathan Corbet" <corbet@lwn.net>
Cc: Frank.Li@nxp.com, dlemoal@kernel.org,
Koichiro Den <den@valinux.co.jp>,
Niklas Cassel <cassel@kernel.org>,
linux-pci@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH v4] PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes
Date: Thu, 29 Jan 2026 14:23:25 +0100 [thread overview]
Message-ID: <20260129132324.2036310-2-cassel@kernel.org> (raw)
Add bar{0,1,2,3,4,5}_size attributes in configfs, so that the user is not
restricted to run pci-epf-test with the hardcoded BAR size values defined
in pci-epf-test.c.
This code is shamelessly more or less copy pasted from pci-epf-vntb.c
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
Changes since V3:
-Use sysfs_emit() (Damien)
-Reduce indendation level of macros by one tab (Damien)
Documentation/PCI/endpoint/pci-test-howto.rst | 19 ++++
drivers/pci/endpoint/functions/pci-epf-test.c | 100 +++++++++++++++++-
2 files changed, 117 insertions(+), 2 deletions(-)
diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
index dd66858cde46..cf38daa512ea 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.rst
+++ b/Documentation/PCI/endpoint/pci-test-howto.rst
@@ -84,6 +84,25 @@ device, the following commands can be used::
# echo 32 > functions/pci_epf_test/func1/msi_interrupts
# echo 2048 > functions/pci_epf_test/func1/msix_interrupts
+By default, pci-epf-test uses the following BAR sizes::
+
+ # grep . functions/pci_epf_test/func1/pci_epf_test.0/bar?_size
+ functions/pci_epf_test/func1/pci_epf_test.0/bar0_size:131072
+ functions/pci_epf_test/func1/pci_epf_test.0/bar1_size:131072
+ functions/pci_epf_test/func1/pci_epf_test.0/bar2_size:131072
+ functions/pci_epf_test/func1/pci_epf_test.0/bar3_size:131072
+ functions/pci_epf_test/func1/pci_epf_test.0/bar4_size:131072
+ functions/pci_epf_test/func1/pci_epf_test.0/bar5_size:1048576
+
+The user can override a default value using e.g.::
+ # echo 1048576 > functions/pci_epf_test/func1/pci_epf_test.0/bar1_size
+
+Overriding the default BAR sizes can only be done before binding the
+pci-epf-test device to a PCI endpoint controller driver.
+
+Note: Some endpoint controllers might have fixed size BARs, or reserved BARs,
+for such controllers, the corresponding BAR size in configfs will be ignored.
+
Binding pci-epf-test Device to EP Controller
--------------------------------------------
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 1cc630a2ee75..f30f6bddda28 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -72,6 +72,7 @@ static struct workqueue_struct *kpcitest_workqueue;
struct pci_epf_test {
void *reg[PCI_STD_NUM_BARS];
struct pci_epf *epf;
+ struct config_group group;
enum pci_barno test_reg_bar;
size_t msix_table_offset;
struct delayed_work cmd_handler;
@@ -85,6 +86,7 @@ struct pci_epf_test {
bool dma_private;
const struct pci_epc_features *epc_features;
struct pci_epf_bar db_bar;
+ size_t bar_size[PCI_STD_NUM_BARS];
};
struct pci_epf_test_reg {
@@ -111,7 +113,8 @@ static struct pci_epf_header test_header = {
.interrupt_pin = PCI_INTERRUPT_INTA,
};
-static size_t bar_size[] = { 131072, 131072, 131072, 131072, 131072, 1048576 };
+/* default BAR sizes, can be overridden by the user using configfs */
+static size_t default_bar_size[] = { 131072, 131072, 131072, 131072, 131072, 1048576 };
static void pci_epf_test_dma_callback(void *param)
{
@@ -1240,7 +1243,7 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf)
if (epc_features->bar[bar].type == BAR_FIXED)
test_reg_size = epc_features->bar[bar].fixed_size;
else
- test_reg_size = bar_size[bar];
+ test_reg_size = epf_test->bar_size[bar];
base = pci_epf_alloc_space(epf, test_reg_size, bar,
epc_features, PRIMARY_INTERFACE);
@@ -1312,6 +1315,95 @@ static void pci_epf_test_unbind(struct pci_epf *epf)
pci_epf_test_free_space(epf);
}
+#define PCI_EPF_TEST_BAR_SIZE_R(_name, _id) \
+static ssize_t pci_epf_test_##_name##_show(struct config_item *item, \
+ char *page) \
+{ \
+ struct config_group *group = to_config_group(item); \
+ struct pci_epf_test *epf_test = \
+ container_of(group, struct pci_epf_test, group); \
+ \
+ return sysfs_emit(page, "%zu\n", epf_test->bar_size[_id]); \
+}
+
+#define PCI_EPF_TEST_BAR_SIZE_W(_name, _id) \
+static ssize_t pci_epf_test_##_name##_store(struct config_item *item, \
+ const char *page, \
+ size_t len) \
+{ \
+ struct config_group *group = to_config_group(item); \
+ struct pci_epf_test *epf_test = \
+ container_of(group, struct pci_epf_test, group); \
+ int val; \
+ int ret; \
+ \
+ /* \
+ * BAR sizes can only be modified before binding to an EPC, \
+ * pci_epf_test_alloc_space() is called in .bind(). \
+ */ \
+ if (epf_test->epf->epc) \
+ return -EINVAL; \
+ \
+ ret = kstrtouint(page, 0, &val); \
+ if (ret) \
+ return ret; \
+ \
+ if (!is_power_of_2(val)) \
+ return -EINVAL; \
+ \
+ epf_test->bar_size[_id] = val; \
+ \
+ return len; \
+}
+
+PCI_EPF_TEST_BAR_SIZE_R(bar0_size, BAR_0)
+PCI_EPF_TEST_BAR_SIZE_W(bar0_size, BAR_0)
+PCI_EPF_TEST_BAR_SIZE_R(bar1_size, BAR_1)
+PCI_EPF_TEST_BAR_SIZE_W(bar1_size, BAR_1)
+PCI_EPF_TEST_BAR_SIZE_R(bar2_size, BAR_2)
+PCI_EPF_TEST_BAR_SIZE_W(bar2_size, BAR_2)
+PCI_EPF_TEST_BAR_SIZE_R(bar3_size, BAR_3)
+PCI_EPF_TEST_BAR_SIZE_W(bar3_size, BAR_3)
+PCI_EPF_TEST_BAR_SIZE_R(bar4_size, BAR_4)
+PCI_EPF_TEST_BAR_SIZE_W(bar4_size, BAR_4)
+PCI_EPF_TEST_BAR_SIZE_R(bar5_size, BAR_5)
+PCI_EPF_TEST_BAR_SIZE_W(bar5_size, BAR_5)
+
+CONFIGFS_ATTR(pci_epf_test_, bar0_size);
+CONFIGFS_ATTR(pci_epf_test_, bar1_size);
+CONFIGFS_ATTR(pci_epf_test_, bar2_size);
+CONFIGFS_ATTR(pci_epf_test_, bar3_size);
+CONFIGFS_ATTR(pci_epf_test_, bar4_size);
+CONFIGFS_ATTR(pci_epf_test_, bar5_size);
+
+static struct configfs_attribute *pci_epf_test_attrs[] = {
+ &pci_epf_test_attr_bar0_size,
+ &pci_epf_test_attr_bar1_size,
+ &pci_epf_test_attr_bar2_size,
+ &pci_epf_test_attr_bar3_size,
+ &pci_epf_test_attr_bar4_size,
+ &pci_epf_test_attr_bar5_size,
+ NULL,
+};
+
+static const struct config_item_type pci_epf_test_group_type = {
+ .ct_attrs = pci_epf_test_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static struct config_group *pci_epf_test_add_cfs(struct pci_epf *epf,
+ struct config_group *group)
+{
+ struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+ struct config_group *epf_group = &epf_test->group;
+ struct device *dev = &epf->dev;
+
+ config_group_init_type_name(epf_group, dev_name(dev),
+ &pci_epf_test_group_type);
+
+ return epf_group;
+}
+
static const struct pci_epf_device_id pci_epf_test_ids[] = {
{
.name = "pci_epf_test",
@@ -1324,6 +1416,7 @@ static int pci_epf_test_probe(struct pci_epf *epf,
{
struct pci_epf_test *epf_test;
struct device *dev = &epf->dev;
+ enum pci_barno bar;
epf_test = devm_kzalloc(dev, sizeof(*epf_test), GFP_KERNEL);
if (!epf_test)
@@ -1331,6 +1424,8 @@ static int pci_epf_test_probe(struct pci_epf *epf,
epf->header = &test_header;
epf_test->epf = epf;
+ for (bar = BAR_0; bar < PCI_STD_NUM_BARS; bar++)
+ epf_test->bar_size[bar] = default_bar_size[bar];
INIT_DELAYED_WORK(&epf_test->cmd_handler, pci_epf_test_cmd_handler);
@@ -1343,6 +1438,7 @@ static int pci_epf_test_probe(struct pci_epf *epf,
static const struct pci_epf_ops ops = {
.unbind = pci_epf_test_unbind,
.bind = pci_epf_test_bind,
+ .add_cfs = pci_epf_test_add_cfs,
};
static struct pci_epf_driver test_driver = {
base-commit: 0ebf8e7943e01b2c38c199228f51adbb89c02425
--
2.52.0
next reply other threads:[~2026-01-29 13:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-29 13:23 Niklas Cassel [this message]
2026-01-29 14:29 ` [PATCH v4] PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes Niklas Cassel
2026-01-30 2:53 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260129132324.2036310-2-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=corbet@lwn.net \
--cc=den@valinux.co.jp \
--cc=dlemoal@kernel.org \
--cc=kishon@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mani@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.