From: Jakub Kicinski <kuba@kernel.org>
To: Michael Chan <michael.chan@broadcom.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, edumazet@google.com,
pabeni@redhat.com, andrew+netdev@lunn.ch,
pavan.chebbi@broadcom.com, andrew.gospodarek@broadcom.com
Subject: Re: [PATCH net v2 4/4] selftests: drv-net: rss_ctx: test RSS contexts persist after ifdown/up
Date: Fri, 6 Feb 2026 21:12:18 -0800 [thread overview]
Message-ID: <20260206211218.323d172f@kernel.org> (raw)
In-Reply-To: <20260206052930.1882740-5-michael.chan@broadcom.com>
On Thu, 5 Feb 2026 21:29:30 -0800 Michael Chan wrote:
> diff --git a/tools/testing/selftests/drivers/net/hw/rss_ctx.py b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
Please use:
ruff check $file
pylint --disable=R $file
and fix the new warnings.
This file predates my discovery of these tools so there are some
warnings already, but let's not add more.
> +@ksft_disruptive
> +def test_rss_context_persist_ifupdown(cfg, pre_down=False):
> + """
> + Test that RSS contexts and their associated ntuple filters persist across
> + an interface down/up cycle.
> +
> + """
> +
> + require_ntuple(cfg)
> +
> + qcnt = len(_get_rx_cnts(cfg))
> + if qcnt < 6:
> + try:
> + ethtool(f"-L {cfg.ifname} combined 6")
> + defer(ethtool, f"-L {cfg.ifname} combined {qcnt}")
> + except:
> + raise KsftSkipEx("Not enough queues for the test")
> +
> + ethtool(f"-X {cfg.ifname} equal 2")
> + defer(ethtool, f"-X {cfg.ifname} default")
> +
> + if pre_down:
> + ip(f"link set dev {cfg.ifname} down")
> +
> + try:
> + ctx1_id = ethtool_create(cfg, "-X", "context new start 2 equal 2")
> + defer(ethtool, f"-X {cfg.ifname} context {ctx1_id} delete")
> + except CmdExitFailure:
> + if pre_down:
> + ip(f"link set dev {cfg.ifname} up")
You should use defer for the ifup. You can save it and run it with
.exec():
ifup = defer(ip, f"link set dev {cfg.ifname} up")
if pre_down:
ip(f"link set dev {cfg.ifname} down")
try:
ctx1_id = ethtool_create(cfg, "-X", "context new start 2 equal 2")
defer(ethtool, f"-X {cfg.ifname} context {ctx1_id} delete")
except CmdExitFailure:
raise KsftSkipEx("Create context not supported with interface down")
....
if not pre_down:
ip(f"link set dev {cfg.ifname} down")
ifup.exec()
this ifup.exec() also removes ifup from the "defer queue".
> + raise KsftSkipEx("Create context not supported with interface down")
> + raise
> +
> + ctx2_id = ethtool_create(cfg, "-X", "context new start 4 equal 2")
> + defer(ethtool, f"-X {cfg.ifname} context {ctx2_id} delete")
> +
> + port_ctx2 = rand_port()
> + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port_ctx2} context {ctx2_id}"
> + ntuple_id = ethtool_create(cfg, "-N", flow)
> + defer(ethtool, f"-N {cfg.ifname} delete {ntuple_id}")
> +
> + if not pre_down:
> + ip(f"link set dev {cfg.ifname} down")
> +
> + ip(f"link set dev {cfg.ifname} up")
You can add here:
wait_file(f"/sys/class/net/{cfg.ifname}/carrier",
lambda x: x.strip() == "1")
to wait for carrier before running the ping loop.
prev parent reply other threads:[~2026-02-07 5:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-06 5:29 [PATCH net v2 0/4] bnxt_en: Fix RSS context and ntuple filter issues Michael Chan
2026-02-06 5:29 ` [PATCH net v2 1/4] bnxt_en: Fix RSS context delete logic Michael Chan
2026-02-06 5:29 ` [PATCH net v2 2/4] bnxt_en: Don't overload fw_vnic_id for RSS context's filters Michael Chan
2026-02-06 5:29 ` [PATCH net v2 3/4] bnxt_en: Fix deleting of Ntuple filters Michael Chan
2026-02-06 5:29 ` [PATCH net v2 4/4] selftests: drv-net: rss_ctx: test RSS contexts persist after ifdown/up Michael Chan
2026-02-06 18:45 ` Bobby Eshleman
2026-02-08 16:26 ` Pavan Chebbi
2026-02-11 1:46 ` Jakub Kicinski
2026-02-11 3:58 ` Pavan Chebbi
2026-02-11 4:17 ` Jakub Kicinski
2026-02-11 5:15 ` Pavan Chebbi
2026-02-11 7:59 ` Pavan Chebbi
2026-02-11 16:31 ` Jakub Kicinski
2026-02-11 16:38 ` Pavan Chebbi
2026-02-11 16:58 ` Jakub Kicinski
2026-02-11 17:23 ` Pavan Chebbi
2026-02-11 17:50 ` Pavan Chebbi
2026-02-12 8:12 ` [PATCH 1/1] " Pavan Chebbi
2026-02-13 1:52 ` Jakub Kicinski
2026-02-13 3:52 ` Pavan Chebbi
2026-02-21 0:40 ` patchwork-bot+netdevbpf
2026-02-07 5:12 ` Jakub Kicinski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260206211218.323d172f@kernel.org \
--to=kuba@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=andrew.gospodarek@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pavan.chebbi@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.