From: Francesco Dolcini <francesco@dolcini.it>
To: u-boot@lists.denx.de, Suhaas Joshi <s-joshi@ti.com>,
trini@konsulko.com, vigneshr@ti.com
Cc: n-francis@ti.com, s-tripathi1@ti.com, k-malarvizhi@ti.com,
kamlesh@ti.com, vishalm@ti.com, d.schultz@phytec.de,
w.egorov@phytec.de, ggiordano@phytec.com
Subject: [REGRESSION] Verdin AM62/62P not booting with 42b3ee7fa524
Date: Mon, 9 Feb 2026 09:38:55 +0100 [thread overview]
Message-ID: <20260209083855.GA9367@francesco-nb> (raw)
Verdin AM62 and AM62P are not booting anymore with U-Boot 42b3ee7fa524,
everything was fine with b5213bbfdcb1.
Looking at the commits between the two revision, I would say that the
issue is with this series https://lore.kernel.org/all/20260127081652.506357-1-s-joshi@ti.com/
Suhaas: Can you help?
Failure::
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.42b3ee7fa524 (Feb 08 2026 - 16:14:45 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
Failed to set clock rates for '/a53@0': -22
SPL initial stack usage: 13504 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed
Authentication passed
Starting ATF on ARM64 core...
NOTICE: BL31: v2.13.0(release):v2.13.0-259-ge0c4d3903b-dirty
NOTICE: BL31: Built : 07:01:36, Jul 1 2025
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.42b3ee7fa524 (Feb 08 2026 - 16:14:45 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
## ... and after that just no logs at all.
Success::
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.b5213bbfdcb1 (Feb 04 2026 - 16:41:48 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
Failed to set clock rates for '/a53@0': -61
SPL initial stack usage: 13504 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed
Authentication passed
Starting ATF on ARM64 core...
NOTICE: BL31: v2.13.0(release):v2.13.0-259-ge0c4d3903b-dirty
NOTICE: BL31: Built : 07:01:36, Jul 1 2025
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.b5213bbfdcb1 (Feb 04 2026 - 16:41:48 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
SPL initial stack usage: 2048 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
U-Boot 2026.04-rc1-0.0.0-devel+git.b5213bbfdcb1 (Feb 04 2026 - 16:41:48 +0000)
SoC: AM62X SR1.0 HS-FS
Reset reason: POR
DRAM: 512 MiB
optee optee: OP-TEE: revision 4.7 (a9690ae39995af36)
Core: 160 devices, 35 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from MMC... Reading from MMC(0)... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Model: Toradex 0071 Verdin AM62 Solo 512MB V1.2A
Serial#: 15412814
Carrier: Toradex Dahlia V1.1D, Serial# 11287147
Thanks,
Francesco
next reply other threads:[~2026-02-09 8:39 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-09 8:38 Francesco Dolcini [this message]
2026-02-09 8:45 ` [REGRESSION] Verdin AM62/62P not booting with 42b3ee7fa524 Francesco Dolcini
2026-02-09 10:08 ` Suhaas Joshi
2026-02-09 10:16 ` Francesco Dolcini
2026-02-09 17:25 ` Francesco Dolcini
2026-02-09 17:43 ` Tom Rini
2026-02-09 18:07 ` Francesco Dolcini
2026-02-09 18:13 ` Tom Rini
2026-02-10 9:26 ` Suhaas Joshi
2026-02-10 10:02 ` Wadim Egorov
2026-02-10 10:22 ` Wadim Egorov
2026-02-10 10:34 ` Francesco Dolcini
2026-02-09 20:20 ` Bryan Brattlof
2026-02-10 10:50 ` Francesco Dolcini
2026-02-11 10:11 ` Francesco Dolcini
2026-02-11 11:21 ` Suhaas Joshi
2026-02-13 10:20 ` Francesco Dolcini
2026-02-17 13:21 ` Suhaas Joshi
2026-02-18 6:59 ` Francesco Dolcini
2026-02-18 14:52 ` Francesco Dolcini
2026-02-19 1:46 ` Bryan Brattlof
2026-02-19 10:30 ` Wadim Egorov
2026-02-19 10:40 ` Suhaas Joshi
2026-02-19 19:30 ` Francesco Dolcini
2026-02-20 1:05 ` Bryan Brattlof
2026-02-20 10:46 ` Francesco Dolcini
2026-02-20 13:23 ` Bryan Brattlof
2026-02-23 15:58 ` Francesco Dolcini
2026-02-24 10:21 ` Francesco Dolcini
2026-02-24 13:53 ` devarsh
2026-02-24 14:38 ` Francesco Dolcini
2026-02-24 15:24 ` Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260209083855.GA9367@francesco-nb \
--to=francesco@dolcini.it \
--cc=d.schultz@phytec.de \
--cc=ggiordano@phytec.com \
--cc=k-malarvizhi@ti.com \
--cc=kamlesh@ti.com \
--cc=n-francis@ti.com \
--cc=s-joshi@ti.com \
--cc=s-tripathi1@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=vishalm@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.