All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xu Yang <xu.yang_2@nxp.com>
To: gregkh@linuxfoundation.org, m.grzeschik@pengutronix.de,
	stern@rowland.harvard.edu
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	imx@lists.linux.dev, jun.li@nxp.com
Subject: [PATCH] usb: port: add delay after usb_hub_set_port_power()
Date: Wed, 11 Feb 2026 18:36:28 +0800	[thread overview]
Message-ID: <20260211103628.3265850-1-xu.yang_2@nxp.com> (raw)

When disable the root hub port, somehow the device is disconnected and
re-connected again. This happens because usb_clear_port_feature() does not
clear a truly happened port change. That says, in fact, port change event
may happen after usb_clear_port_feature() is called. Then the subsequent
port change event will have impact on usb device suspend routine.

Below log shows what is happening:

$ echo 1 > usb1-port1/disable
[   37.958239] usb 1-1: USB disconnect, device number 2
[   37.964101] usb 1-1: unregistering device
[   37.970070] hub 1-0:1.0: hub_suspend
[   37.971305] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[   37.974412] usb usb1: bus auto-suspend, wakeup 1
[   37.988175] usb usb1: suspend raced with wakeup event         <---
[   37.993947] usb usb1: usb auto-resume
[   37.998401] hub 1-0:1.0: hub_resume
[   38.105688] usb usb1-port1: status 0000, change 0000, 12 Mb/s
[   38.112399] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[   38.118645] hub 1-0:1.0: hub_suspend
[   38.122963] usb usb1: bus auto-suspend, wakeup 1
[   38.200368] usb usb1: usb wakeup-resume
[   38.204982] usb usb1: usb auto-resume
[   38.209376] hub 1-0:1.0: hub_resume
[   38.213676] usb usb1-port1: status 0101 change 0001
[   38.321552] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[   38.327978] usb usb1-port1: status 0101, change 0000, 12 Mb/s
[   38.457429] usb 1-1: new high-speed USB device number 3 using ci_hdrc

To fix the issue, add delay after usb_hub_set_port_power(). So port change
bit will be fixed to the final state and usb_clear_port_feature() can
correctly clear it after this period. This will also avoid usb runtime
suspend routine to run because usb_autopm_put_interface() not run yet.

Fixes: f061f43d7418 ("usb: hub: port: add sysfs entry to switch port power")
Cc: stable@kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
 drivers/usb/core/port.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index f54198171b6a..a47df5d32f7c 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -141,6 +141,7 @@ static ssize_t disable_store(struct device *dev, struct device_attribute *attr,
 		usb_disconnect(&port_dev->child);
 
 	rc = usb_hub_set_port_power(hdev, hub, port1, !disabled);
+	msleep(2 * hub_power_on_good_delay(hub));
 
 	if (disabled) {
 		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
-- 
2.34.1


             reply	other threads:[~2026-02-11 10:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-11 10:36 Xu Yang [this message]
2026-02-11 11:19 ` [PATCH] usb: port: add delay after usb_hub_set_port_power() Greg KH
2026-02-12 10:19   ` Xu Yang
2026-02-11 15:04 ` Alan Stern
2026-02-11 15:47   ` Greg KH
2026-02-11 16:07     ` Alan Stern
2026-02-12 10:20   ` Xu Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260211103628.3265850-1-xu.yang_2@nxp.com \
    --to=xu.yang_2@nxp.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.grzeschik@pengutronix.de \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.