From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Zenm Chen <zenmchen@gmail.com>,
Paul Menzel <pmenzel@molgen.mpg.de>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Subject: [PATCH 6.12 05/24] Bluetooth: btusb: Add USB ID 7392:e611 for Edimax EW-7611UXB
Date: Fri, 13 Feb 2026 14:48:24 +0100 [thread overview]
Message-ID: <20260213134704.926389981@linuxfoundation.org> (raw)
In-Reply-To: <20260213134704.728003077@linuxfoundation.org>
6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zenm Chen <zenmchen@gmail.com>
commit 6c0568b7741a346088fd6dfced2d871f7d481d06 upstream.
Add USB ID 7392:e611 for Edimax EW-7611UXB which is RTL8851BU-based
Wi-Fi + Bluetooth adapter.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=7392 ProdID=e611 Rev= 0.00
S: Manufacturer=Realtek
S: Product=802.11ax WLAN Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtw89_8851bu_git
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org # 6.6.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -519,6 +519,8 @@ static const struct usb_device_id quirks
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x2001, 0x332a), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x7392, 0xe611), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8852AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
next prev parent reply other threads:[~2026-02-13 13:56 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-13 13:48 [PATCH 6.12 00/24] 6.12.72-rc1 review Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 01/24] smb: client: split cached_fid bitfields to avoid shared-byte RMW races Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 02/24] ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 03/24] smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 04/24] driver core: enforce device_lock for driver_match_device() Greg Kroah-Hartman
2026-02-13 13:48 ` Greg Kroah-Hartman [this message]
2026-02-13 13:48 ` [PATCH 6.12 06/24] crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 07/24] crypto: octeontx - Fix length check to avoid truncation in ucode_load_store Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 08/24] crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 09/24] crypto: virtio - Add spinlock protection with virtqueue notification Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 10/24] crypto: virtio - Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 11/24] nilfs2: Fix potential block overflow that cause system hang Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 12/24] wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 13/24] scsi: qla2xxx: Validate sp before freeing associated memory Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 14/24] scsi: qla2xxx: Allow recovery for tape devices Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 15/24] scsi: qla2xxx: Delay module unload while fabric scan in progress Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 16/24] scsi: qla2xxx: Free sp in error path to fix system crash Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 17/24] scsi: qla2xxx: Query FW again before proceeding with login Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 18/24] bus: mhi: host: pci_generic: Add Telit FE990B40 modem support Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 19/24] mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 20/24] erofs: fix UAF issue for file-backed mounts w/ directio option Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 21/24] xfs: fix UAF in xchk_btree_check_block_owner Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 22/24] PCI: endpoint: Avoid creating sub-groups asynchronously Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 23/24] wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.12 24/24] gpio: omap: do not register driver in probe() Greg Kroah-Hartman
2026-02-13 19:09 ` [PATCH 6.12 00/24] 6.12.72-rc1 review Florian Fainelli
2026-02-13 19:20 ` Jon Hunter
2026-02-13 23:54 ` Peter Schneider
2026-02-14 0:58 ` Brett Mastbergen
2026-02-14 10:42 ` Ron Economos
2026-02-14 16:01 ` Brett A C Sheffield
2026-02-14 23:58 ` Barry K. Nathan
2026-02-15 0:06 ` Miguel Ojeda
2026-02-16 14:27 ` Mark Brown
2026-02-16 15:35 ` Greg Kroah-Hartman
2026-02-16 15:47 ` Danilo Krummrich
2026-02-16 16:01 ` Danilo Krummrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260213134704.926389981@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=luiz.von.dentz@intel.com \
--cc=patches@lists.linux.dev \
--cc=pmenzel@molgen.mpg.de \
--cc=stable@vger.kernel.org \
--cc=zenmchen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.