[PATCH net-next 0/2] net: phy: add Rust reference driver for ET1011C

[Artem Lytkin <iprintercanon@gmail.com>]

This series adds a Rust reference driver for the LSI ET1011C PHY,
following the pattern established by the existing Rust Asix PHY driver
(ax88796b_rust.rs).

Patch 1 exposes genphy_config_aneg() in the Rust PHY abstraction,
which is needed by PHY drivers that perform custom BMCR configuration
before calling the generic auto-negotiation setup.

Patch 2 adds the Rust ET1011C driver itself, implementing config_aneg
and read_status callbacks. It is a feature-equivalent port of the C
driver at drivers/net/phy/et1011c.c.

Artem Lytkin (2):
  rust: net: phy: expose genphy_config_aneg()
  net: phy: add Rust reference driver for ET1011C

 drivers/net/phy/Kconfig         |  9 +++++
 drivers/net/phy/Makefile        |  6 ++-
 drivers/net/phy/et1011c_rust.rs | 70 +++++++++++++++++++++++++++++++++
 rust/kernel/net/phy.rs          |  9 +++++
 4 files changed, 93 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/phy/et1011c_rust.rs

-- 
2.43.0