From: Zenghui Yu <zenghui.yu@linux.dev>
To: kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: maz@kernel.org, oupton@kernel.org, joey.gouly@arm.com,
suzuki.poulose@arm.com,
"Zenghui Yu (Huawei)" <zenghui.yu@linux.dev>
Subject: [PATCH 1/3] KVM: arm64: nv: Check S2 limits based on implemented PA size
Date: Thu, 26 Feb 2026 01:35:13 +0800 [thread overview]
Message-ID: <20260225173515.20490-2-zenghui.yu@linux.dev> (raw)
In-Reply-To: <20260225173515.20490-1-zenghui.yu@linux.dev>
From: "Zenghui Yu (Huawei)" <zenghui.yu@linux.dev>
check_base_s2_limits() checks the validity of SL0 and inputsize against
ia_size (inputsize again!) but the pseudocode from DDI0487 G.a
AArch64.TranslationTableWalk() says that we should check against the
implemented PA size.
We would otherwise fail to walk S2 with a valid configuration. E.g.,
granule size = 4KB, inputsize = 40 bits, initial lookup level = 0 (no
concatenation) on a system with 48 bits PA range supported is allowed by
architecture.
Fix it by obtaining PA size by kvm_get_pa_bits(). Note that
kvm_get_pa_bits() returns the fixed limit now and should eventually reflect
the per VM PARange (one day!). Given that the configured PARange should not
be greater that kvm_ipa_limit, it at least fixes the problem described
above.
While at it, inject a level 0 translation fault to guest if
check_base_s2_limits() fails, as per the pseudocode.
Fixes: 61e30b9eef7f ("KVM: arm64: nv: Implement nested Stage-2 page table walk logic")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
---
arch/arm64/kvm/nested.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c
index 620126d1f0dc..44ed3915b961 100644
--- a/arch/arm64/kvm/nested.c
+++ b/arch/arm64/kvm/nested.c
@@ -152,31 +152,31 @@ static int get_ia_size(struct s2_walk_info *wi)
return 64 - wi->t0sz;
}
-static int check_base_s2_limits(struct s2_walk_info *wi,
+static int check_base_s2_limits(struct kvm_vcpu *vcpu, struct s2_walk_info *wi,
int level, int input_size, int stride)
{
- int start_size, ia_size;
+ int start_size, pa_max;
- ia_size = get_ia_size(wi);
+ pa_max = kvm_get_pa_bits(vcpu->kvm);
/* Check translation limits */
switch (BIT(wi->pgshift)) {
case SZ_64K:
- if (level == 0 || (level == 1 && ia_size <= 42))
+ if (level == 0 || (level == 1 && pa_max <= 42))
return -EFAULT;
break;
case SZ_16K:
- if (level == 0 || (level == 1 && ia_size <= 40))
+ if (level == 0 || (level == 1 && pa_max <= 40))
return -EFAULT;
break;
case SZ_4K:
- if (level < 0 || (level == 0 && ia_size <= 42))
+ if (level < 0 || (level == 0 && pa_max <= 42))
return -EFAULT;
break;
}
/* Check input size limits */
- if (input_size > ia_size)
+ if (input_size > pa_max)
return -EFAULT;
/* Check number of entries in starting level table */
@@ -269,9 +269,11 @@ static int walk_nested_s2_pgd(struct kvm_vcpu *vcpu, phys_addr_t ipa,
if (input_size > 48 || input_size < 25)
return -EFAULT;
- ret = check_base_s2_limits(wi, level, input_size, stride);
- if (WARN_ON(ret))
+ ret = check_base_s2_limits(vcpu, wi, level, input_size, stride);
+ if (WARN_ON(ret)) {
+ out->esr = compute_fsc(0, ESR_ELx_FSC_FAULT);
return ret;
+ }
base_lower_bound = 3 + input_size - ((3 - level) * stride +
wi->pgshift);
--
2.53.0
next prev parent reply other threads:[~2026-02-25 17:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 17:35 [PATCH 0/3] KVM: arm64: minor fixes about S2 page table walker Zenghui Yu
2026-02-25 17:35 ` Zenghui Yu [this message]
2026-02-25 17:35 ` [PATCH 2/3] KVM: arm64: nv: Report addrsz fault at level 0 with a bad VTTBR.BADDR Zenghui Yu
2026-02-25 17:35 ` [PATCH 3/3] KVM: arm64: nv: Inject a SEA if failed to read the descriptor Zenghui Yu
2026-03-06 10:48 ` [PATCH 0/3] KVM: arm64: minor fixes about S2 page table walker Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225173515.20490-2-zenghui.yu@linux.dev \
--to=zenghui.yu@linux.dev \
--cc=joey.gouly@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.