All of lore.kernel.org
 help / color / mirror / Atom feed
From: Long Li <longli@microsoft.com>
To: Long Li <longli@microsoft.com>, Wei Hu <weh@microsoft.com>,
	Stephen Hemminger <stephen@networkplumber.org>
Cc: dev@dpdk.org
Subject: [PATCH] net/netvsc: support runtime queue count reconfiguration
Date: Wed, 25 Feb 2026 11:50:40 -0800	[thread overview]
Message-ID: <20260225195040.945067-1-longli@microsoft.com> (raw)

Add support for changing the number of RX/TX queues at runtime
via port stop/configure/start. When the queue count changes,
perform a full NVS/RNDIS teardown and reinit to allocate fresh
VMBus subchannels matching the new queue count, then reconfigure
RSS indirection table accordingly.

Key changes:
- hn_dev_configure: detect queue count changes and perform full
  NVS session reinit with subchannel teardown/recreation
- hn_dev_stop: drain pending TX completions (up to 1s) to prevent
  stale completions from corrupting queue state after reconfig
- eth_hn_dev_uninit: close subchannels before primary channel to
  prevent resource leaks on device removal
- hn_vf_tx/rx_queue_release: null VF queue pointers after release
  to prevent use-after-free when the ethdev framework releases
  excess queues during VF reconfiguration

Signed-off-by: Long Li <longli@microsoft.com>
---
 drivers/net/netvsc/hn_ethdev.c | 151 ++++++++++++++++++++++++++++++++-
 drivers/net/netvsc/hn_vf.c     |   8 +-
 2 files changed, 154 insertions(+), 5 deletions(-)

diff --git a/drivers/net/netvsc/hn_ethdev.c b/drivers/net/netvsc/hn_ethdev.c
index 6584819f4f..a0bb37a66c 100644
--- a/drivers/net/netvsc/hn_ethdev.c
+++ b/drivers/net/netvsc/hn_ethdev.c
@@ -745,6 +745,9 @@ netvsc_hotadd_callback(const char *device_name, enum rte_dev_event_type type,
 	}
 }
 
+static void hn_detach(struct hn_data *hv);
+static int hn_attach(struct hn_data *hv, unsigned int mtu);
+
 static int hn_dev_configure(struct rte_eth_dev *dev)
 {
 	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
@@ -754,6 +757,7 @@ static int hn_dev_configure(struct rte_eth_dev *dev)
 	struct hn_data *hv = dev->data->dev_private;
 	uint64_t unsupported;
 	int i, err, subchan;
+	uint32_t old_subchans = 0;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -778,6 +782,7 @@ static int hn_dev_configure(struct rte_eth_dev *dev)
 
 	hv->vlan_strip = !!(rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP);
 
+	/* Configure RNDIS offload regardless of queue count change */
 	err = hn_rndis_conf_offload(hv, txmode->offloads,
 				    rxmode->offloads);
 	if (err) {
@@ -786,28 +791,93 @@ static int hn_dev_configure(struct rte_eth_dev *dev)
 		return err;
 	}
 
+	/* If queue count unchanged, skip subchannel teardown/reinit */
+	if (RTE_MAX(dev->data->nb_rx_queues,
+		    dev->data->nb_tx_queues) == hv->num_queues)
+		goto skip_reinit;
+
 	hv->num_queues = RTE_MAX(dev->data->nb_rx_queues,
 				 dev->data->nb_tx_queues);
 
+	/* Close all existing subchannels */
+	for (i = 1; i < HN_MAX_CHANNELS; i++) {
+		if (hv->channels[i] != NULL) {
+			rte_vmbus_chan_close(hv->channels[i]);
+			hv->channels[i] = NULL;
+			old_subchans++;
+		}
+	}
+
+	/*
+	 * If subchannels existed, do a full NVS/RNDIS teardown
+	 * and vmbus re-init to ensure a clean NVS session.
+	 * Cannot re-send NVS subchannel request on the same
+	 * session without invalidating the data path.
+	 */
+	if (old_subchans > 0) {
+		PMD_DRV_LOG(NOTICE,
+			    "reinit NVS (had %u subchannels)",
+			    old_subchans);
+
+		hn_detach(hv);
+
+		rte_vmbus_chan_close(hv->channels[0]);
+		rte_free(hv->channels[0]);
+		hv->channels[0] = NULL;
+
+		rte_vmbus_unmap_device(hv->vmbus);
+		err = rte_vmbus_map_device(hv->vmbus);
+		if (err) {
+			PMD_DRV_LOG(ERR,
+				    "Could not re-map vmbus device!");
+			goto reinit_failed;
+		}
+
+		hv->rxbuf_res = hv->vmbus->resource[HV_RECV_BUF_MAP];
+		hv->chim_res  = hv->vmbus->resource[HV_SEND_BUF_MAP];
+
+		err = rte_vmbus_chan_open(hv->vmbus, &hv->channels[0]);
+		if (err) {
+			PMD_DRV_LOG(ERR,
+				    "Could not re-open vmbus channel!");
+			goto reinit_failed;
+		}
+
+		rte_vmbus_set_latency(hv->vmbus, hv->channels[0],
+				      hv->latency);
+
+		err = hn_attach(hv, dev->data->mtu);
+		if (err) {
+			rte_vmbus_chan_close(hv->channels[0]);
+			rte_free(hv->channels[0]);
+			hv->channels[0] = NULL;
+			PMD_DRV_LOG(ERR,
+				    "NVS reinit failed: %d", err);
+			goto reinit_failed;
+		}
+	}
+
 	for (i = 0; i < NDIS_HASH_INDCNT; i++)
 		hv->rss_ind[i] = i % dev->data->nb_rx_queues;
 
 	hn_rss_hash_init(hv, rss_conf);
 
 	subchan = hv->num_queues - 1;
+
+	/* Allocate fresh subchannels and configure RSS */
 	if (subchan > 0) {
 		err = hn_subchan_configure(hv, subchan);
 		if (err) {
 			PMD_DRV_LOG(NOTICE,
 				    "subchannel configuration failed");
-			return err;
+			goto subchan_cleanup;
 		}
 
 		err = hn_rndis_conf_rss(hv, NDIS_RSS_FLAG_DISABLE);
 		if (err) {
 			PMD_DRV_LOG(NOTICE,
 				"rss disable failed");
-			return err;
+			goto subchan_cleanup;
 		}
 
 		if (rss_conf->rss_hf != 0) {
@@ -815,12 +885,53 @@ static int hn_dev_configure(struct rte_eth_dev *dev)
 			if (err) {
 				PMD_DRV_LOG(NOTICE,
 					    "initial RSS config failed");
-				return err;
+				goto subchan_cleanup;
 			}
 		}
 	}
 
+skip_reinit:
 	return hn_vf_configure_locked(dev, dev_conf);
+
+subchan_cleanup:
+	for (i = 1; i < HN_MAX_CHANNELS; i++) {
+		if (hv->channels[i] != NULL) {
+			rte_vmbus_chan_close(hv->channels[i]);
+			hv->channels[i] = NULL;
+		}
+	}
+	hv->num_queues = 1;
+	return err;
+
+reinit_failed:
+	/* Device is in a broken state after failed reinit.
+	 * Try to re-establish minimal connectivity.
+	 */
+	PMD_DRV_LOG(ERR,
+		    "reinit failed (err %d), attempting recovery", err);
+	if (hv->channels[0] == NULL) {
+		if (rte_vmbus_chan_open(hv->vmbus, &hv->channels[0]) == 0) {
+			if (hn_attach(hv, dev->data->mtu) == 0) {
+				hv->num_queues = 1;
+				PMD_DRV_LOG(NOTICE,
+					    "recovery successful on primary channel");
+			} else {
+				rte_vmbus_chan_close(hv->channels[0]);
+				rte_free(hv->channels[0]);
+				hv->channels[0] = NULL;
+				hv->num_queues = 0;
+				PMD_DRV_LOG(ERR,
+					    "recovery failed, device unusable");
+			}
+		} else {
+			hv->num_queues = 0;
+			PMD_DRV_LOG(ERR,
+				    "recovery failed, device unusable");
+		}
+	} else {
+		hv->num_queues = 1;
+	}
+	return err;
 }
 
 static int hn_dev_stats_get(struct rte_eth_dev *dev,
@@ -1067,6 +1178,7 @@ hn_dev_stop(struct rte_eth_dev *dev)
 {
 	struct hn_data *hv = dev->data->dev_private;
 	int i, ret;
+	unsigned int retry;
 
 	PMD_INIT_FUNC_TRACE();
 	dev->data->dev_started = 0;
@@ -1075,6 +1187,29 @@ hn_dev_stop(struct rte_eth_dev *dev)
 	hn_rndis_set_rxfilter(hv, 0);
 	ret = hn_vf_stop(dev);
 
+	/*
+	 * Drain pending TX completions to prevent stale completions
+	 * from corrupting queue state after port reconfiguration.
+	 */
+	for (retry = 0; retry < 100; retry++) {
+		uint32_t pending = 0;
+
+		for (i = 0; i < hv->num_queues; i++) {
+			struct hn_tx_queue *txq = dev->data->tx_queues[i];
+
+			if (txq == NULL)
+				continue;
+			hn_process_events(hv, i, 0);
+			pending += rte_mempool_in_use_count(txq->txdesc_pool);
+		}
+		if (pending == 0)
+			break;
+		rte_delay_ms(10);
+	}
+	if (retry >= 100)
+		PMD_DRV_LOG(WARNING,
+			    "Failed to drain all TX completions");
+
 	for (i = 0; i < hv->num_queues; i++) {
 		dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STOPPED;
 		dev->data->rx_queue_state[i] = RTE_ETH_QUEUE_STATE_STOPPED;
@@ -1433,6 +1568,7 @@ eth_hn_dev_uninit(struct rte_eth_dev *eth_dev)
 {
 	struct hn_data *hv = eth_dev->data->dev_private;
 	int ret, ret_stop;
+	int i;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -1444,6 +1580,15 @@ eth_hn_dev_uninit(struct rte_eth_dev *eth_dev)
 
 	hn_detach(hv);
 	hn_chim_uninit(eth_dev);
+
+	/* Close any subchannels before closing the primary channel */
+	for (i = 1; i < HN_MAX_CHANNELS; i++) {
+		if (hv->channels[i] != NULL) {
+			rte_vmbus_chan_close(hv->channels[i]);
+			hv->channels[i] = NULL;
+		}
+	}
+
 	rte_vmbus_chan_close(hv->channels[0]);
 	rte_free(hv->primary);
 	ret = rte_eth_dev_owner_delete(hv->owner.id);
diff --git a/drivers/net/netvsc/hn_vf.c b/drivers/net/netvsc/hn_vf.c
index 0ecfaf54ea..756241e58d 100644
--- a/drivers/net/netvsc/hn_vf.c
+++ b/drivers/net/netvsc/hn_vf.c
@@ -639,8 +639,10 @@ void hn_vf_tx_queue_release(struct hn_data *hv, uint16_t queue_id)
 
 	rte_rwlock_read_lock(&hv->vf_lock);
 	vf_dev = hn_get_vf_dev(hv);
-	if (vf_dev && vf_dev->dev_ops->tx_queue_release)
+	if (vf_dev && vf_dev->dev_ops->tx_queue_release) {
 		(*vf_dev->dev_ops->tx_queue_release)(vf_dev, queue_id);
+		vf_dev->data->tx_queues[queue_id] = NULL;
+	}
 
 	rte_rwlock_read_unlock(&hv->vf_lock);
 }
@@ -671,8 +673,10 @@ void hn_vf_rx_queue_release(struct hn_data *hv, uint16_t queue_id)
 
 	rte_rwlock_read_lock(&hv->vf_lock);
 	vf_dev = hn_get_vf_dev(hv);
-	if (vf_dev && vf_dev->dev_ops->rx_queue_release)
+	if (vf_dev && vf_dev->dev_ops->rx_queue_release) {
 		(*vf_dev->dev_ops->rx_queue_release)(vf_dev, queue_id);
+		vf_dev->data->rx_queues[queue_id] = NULL;
+	}
 	rte_rwlock_read_unlock(&hv->vf_lock);
 }
 
-- 
2.43.0


             reply	other threads:[~2026-02-25 19:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-25 19:50 Long Li [this message]
2026-02-25 22:41 ` [PATCH] net/netvsc: support runtime queue count reconfiguration Stephen Hemminger
2026-02-26  4:17   ` [EXTERNAL] " Long Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260225195040.945067-1-longli@microsoft.com \
    --to=longli@microsoft.com \
    --cc=dev@dpdk.org \
    --cc=stephen@networkplumber.org \
    --cc=weh@microsoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.