All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joey Lu <a0987203069@gmail.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org,
	mcoquelin.stm32@gmail.com, richardcochran@gmail.com
Cc: alexandre.torgue@foss.st.com, joabreu@synopsys.com,
	ychuang3@nuvoton.com, schung@nuvoton.com, yclu4@nuvoton.com,
	peppe.cavallaro@st.com, linux-arm-kernel@lists.infradead.org,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Joey Lu <a0987203069@gmail.com>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH net-next v13 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family
Date: Tue,  3 Mar 2026 17:20:06 +0800	[thread overview]
Message-ID: <20260303092006.263715-4-a0987203069@gmail.com> (raw)
In-Reply-To: <20260303092006.263715-1-a0987203069@gmail.com>

Add support for Gigabit Ethernet on Nuvoton MA35 series using dwmac driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-nuvoton.c   | 136 ++++++++++++++++++
 3 files changed, 149 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 07088d03dbab..861f1c6c14f1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -132,6 +132,18 @@ config DWMAC_MESON
 	  the stmmac device driver. This driver is used for Meson6,
 	  Meson8, Meson8b and GXBB SoCs.
 
+config DWMAC_NUVOTON
+	tristate "Nuvoton MA35 dwmac support"
+	default ARCH_MA35
+	depends on OF && (ARCH_MA35 || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for Ethernet controller on Nuvoton MA35 series SoC.
+
+	  This selects the Nuvoton MA35 series SoC glue layer support
+	  for the stmmac device driver. The nuvoton-dwmac driver is
+	  used for MA35 series SoCs.
+
 config DWMAC_QCOM_ETHQOS
 	tristate "Qualcomm ETHQOS support"
 	default ARCH_QCOM
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index c9263987ef8d..4ade030b634f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
 obj-$(CONFIG_DWMAC_MEDIATEK)	+= dwmac-mediatek.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
+obj-$(CONFIG_DWMAC_NUVOTON)	+= dwmac-nuvoton.o
 obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
 obj-$(CONFIG_DWMAC_RENESAS_GBETH) += dwmac-renesas-gbeth.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c
new file mode 100644
index 000000000000..80f1d7419d46
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nuvoton DWMAC specific glue layer
+ *
+ * Copyright (C) 2025 Nuvoton Technology Corp.
+ *
+ * Author: Joey Lu <a0987203069@gmail.com>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+#define NVT_REG_SYS_GMAC0MISCR  0x108
+#define NVT_REG_SYS_GMAC1MISCR  0x10C
+
+#define NVT_MISCR_RMII          BIT(0)
+
+/* Two thousand picoseconds are evenly mapped to a 4-bit field,
+ * resulting in each step being 2000/15 picoseconds.
+ */
+#define NVT_PATH_DELAY_STEP     134
+#define NVT_TX_DELAY_MASK       GENMASK(19, 16)
+#define NVT_RX_DELAY_MASK       GENMASK(23, 20)
+
+struct nvt_priv_data {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 macid;
+};
+
+static int nvt_gmac_get_delay(struct device *dev, const char *property)
+{
+	u32 arg;
+
+	if (of_property_read_u32(dev->of_node, property, &arg))
+		return 0;
+
+	if (arg > 2000)
+		return -EINVAL;
+
+	if (arg == 2000)
+		return 15;
+
+	return arg / NVT_PATH_DELAY_STEP;
+}
+
+static int nvt_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
+{
+	struct nvt_priv_data *priv = bsp_priv;
+	u32 reg, val;
+	int ret;
+
+	if (phy_intf_sel == PHY_INTF_SEL_RGMII) {
+		ret = nvt_gmac_get_delay(priv->dev, "rx-internal-delay-ps");
+		if (ret < 0)
+			return ret;
+		val = FIELD_PREP(NVT_RX_DELAY_MASK, ret);
+
+		ret = nvt_gmac_get_delay(priv->dev, "tx-internal-delay-ps");
+		if (ret < 0)
+			return ret;
+		val |= FIELD_PREP(NVT_TX_DELAY_MASK, ret);
+	} else if (phy_intf_sel == PHY_INTF_SEL_RMII) {
+		val = NVT_MISCR_RMII;
+	} else {
+		return -EINVAL;
+	}
+
+	reg = (priv->macid == 0) ? NVT_REG_SYS_GMAC0MISCR : NVT_REG_SYS_GMAC1MISCR;
+	regmap_update_bits(priv->regmap, reg,
+			   NVT_RX_DELAY_MASK | NVT_TX_DELAY_MASK | NVT_MISCR_RMII, val);
+
+	return 0;
+}
+
+static int nvt_gmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
+	struct nvt_priv_data *priv;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get platform resources\n");
+
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return dev_err_probe(dev, PTR_ERR(plat_dat), "Failed to get platform data\n");
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return dev_err_probe(dev, -ENOMEM, "Failed to allocate private data\n");
+
+	priv->regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node, "nuvoton,sys",
+							    1, &priv->macid);
+	if (IS_ERR(priv->regmap))
+		ret = dev_err_probe(dev, PTR_ERR(priv->regmap), "Failed to get sys register\n");
+
+	if (priv->macid > 1)
+		ret = dev_err_probe(dev, -EINVAL, "Invalid sys arguments\n");
+
+	plat_dat->bsp_priv = priv;
+	plat_dat->set_phy_intf_sel = nvt_set_phy_intf_sel;
+
+	return stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id nvt_dwmac_match[] = {
+	{ .compatible = "nuvoton,ma35d1-dwmac"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, nvt_dwmac_match);
+
+static struct platform_driver nvt_dwmac_driver = {
+	.probe  = nvt_gmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "nuvoton-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = nvt_dwmac_match,
+	},
+};
+module_platform_driver(nvt_dwmac_driver);
+
+MODULE_AUTHOR("Joey Lu <a0987203069@gmail.com>");
+MODULE_DESCRIPTION("Nuvoton DWMAC specific glue layer");
+MODULE_LICENSE("GPL");
-- 
2.43.0



      parent reply	other threads:[~2026-03-03  9:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-03  9:20 [PATCH net-next v13 0/3] Add support for Nuvoton MA35D1 GMAC Joey Lu
2026-03-03  9:20 ` [PATCH net-next v13 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC Joey Lu
2026-03-03 10:25   ` Rob Herring (Arm)
2026-03-03  9:20 ` [PATCH net-next v13 2/3] arm64: dts: nuvoton: Add Ethernet nodes Joey Lu
2026-03-03  9:20 ` Joey Lu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260303092006.263715-4-a0987203069@gmail.com \
    --to=a0987203069@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=schung@nuvoton.com \
    --cc=ychuang3@nuvoton.com \
    --cc=yclu4@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.