All of lore.kernel.org
 help / color / mirror / Atom feed
From: jrossi@linux.ibm.com
To: qemu-devel@nongnu.org, qemu-s390x@nongnu.org, thuth@redhat.com,
	mst@redhat.com
Cc: jjherne@linux.ibm.com, alifm@linux.ibm.com, farman@linux.ibm.com,
	mjrosato@linux.ibm.com, jrossi@linux.ibm.com,
	zycai@linux.ibm.com
Subject: [PATCH v4 00/15]  s390x: Add support for virtio-blk-pci IPL device
Date: Tue,  3 Mar 2026 21:59:02 -0500	[thread overview]
Message-ID: <20260304025917.2157032-1-jrossi@linux.ibm.com> (raw)

From: Jared Rossi <jrossi@linux.ibm.com>

This patch series introduces an IPLB subtype to support PCI devices, which may
be built if a device has been assigned a boot index and is identified as a PCI
device with a corresponding s390 PCI Bus device.

Boot support is only added for virtio-blk-pci at this time and is limited to
devices with an assigned bootindex.

A "loadparm" property is added to virtio-blk-pci boot devices on s390x.

A simple test to check basic functionality is added to the cdrom-tests in qtest.

Changes v3 -> v4:
    - Reset virtio device after failed boot (not PCI specific)
    - Use defined constant for CLP block size
    - Enable PCI bus master bit
    - Refactor where some byte swaps happen
    - Fix an incorrect offset during PCI config read
    - Update maintainers when moving CLP definitions
    - Improve various error messages to include more info/codes

Jared Rossi (15):
  pc-bios/s390-ccw: Fix misattributed function prototypes
  pc-bios/s390-ccw: Remove redundant vring schid attribute
  pc-bios/s390-ccw: Always reset virtio device on failed boot attempt
  s390x: Remove duplicate definitions of IPL types
  pc-bios/s390-ccw: Store device type independent of sense data
  pc-bios/s390-ccw: Split virtio-ccw and generic virtio
  include/hw/s390x: Move CLP definitions for easier BIOS access
  pc-bios/s390-ccw: Introduce CLP Architecture
  s390x: Add definitions for PCI IPL type
  pc-bios/s390-ccw: Introduce PCI device
  pc-bios/s390-ccw: Introduce virtio-pci functions
  pc-bios/s390-ccw: Add support for virtio-blk-pci IPL
  s390x: Build IPLB for virtio-pci devices
  hw: Add "loadparm" property to virtio block PCI devices booting on
    s390x
  tests/qtest: Add s390x PCI boot test to cdrom-test.c

 MAINTAINERS                               |   1 +
 hw/pci/pci.c                              |  38 ++
 hw/s390x/ipl.c                            |  63 +++-
 hw/s390x/ipl.h                            |   8 +-
 hw/s390x/s390-pci-bus.c                   |   3 +-
 hw/s390x/s390-pci-vfio.c                  |   2 +-
 hw/virtio/virtio-blk-pci.c                |   1 +
 include/hw/pci/pci.h                      |   1 +
 include/hw/pci/pci_device.h               |   3 +
 include/hw/s390x/ipl/qipl.h               |  20 +
 include/hw/s390x/{ => ipl}/s390-pci-clp.h |   0
 include/hw/s390x/s390-pci-bus.h           |   4 +-
 pc-bios/s390-ccw/Makefile                 |   3 +-
 pc-bios/s390-ccw/bootmap.c                |   2 +-
 pc-bios/s390-ccw/clp.c                    |  99 +++++
 pc-bios/s390-ccw/clp.h                    |  24 ++
 pc-bios/s390-ccw/iplb.h                   |   4 -
 pc-bios/s390-ccw/main.c                   |  83 ++++-
 pc-bios/s390-ccw/netmain.c                |   2 +-
 pc-bios/s390-ccw/pci.c                    | 118 ++++++
 pc-bios/s390-ccw/pci.h                    |  42 +++
 pc-bios/s390-ccw/s390-ccw.h               |   7 -
 pc-bios/s390-ccw/virtio-blkdev.c          |  76 ++--
 pc-bios/s390-ccw/virtio-ccw.c             | 241 ++++++++++++
 pc-bios/s390-ccw/virtio-ccw.h             |  24 ++
 pc-bios/s390-ccw/virtio-net.c             |   5 +-
 pc-bios/s390-ccw/virtio-pci.c             | 432 ++++++++++++++++++++++
 pc-bios/s390-ccw/virtio-pci.h             |  82 ++++
 pc-bios/s390-ccw/virtio-scsi.c            |   8 +-
 pc-bios/s390-ccw/virtio-scsi.h            |   2 +-
 pc-bios/s390-ccw/virtio.c                 | 293 +++++----------
 pc-bios/s390-ccw/virtio.h                 |  21 +-
 tests/qtest/cdrom-test.c                  |   7 +
 33 files changed, 1448 insertions(+), 271 deletions(-)
 rename include/hw/s390x/{ => ipl}/s390-pci-clp.h (100%)
 create mode 100644 pc-bios/s390-ccw/clp.c
 create mode 100644 pc-bios/s390-ccw/clp.h
 create mode 100644 pc-bios/s390-ccw/pci.c
 create mode 100644 pc-bios/s390-ccw/pci.h
 create mode 100644 pc-bios/s390-ccw/virtio-ccw.c
 create mode 100644 pc-bios/s390-ccw/virtio-ccw.h
 create mode 100644 pc-bios/s390-ccw/virtio-pci.c
 create mode 100644 pc-bios/s390-ccw/virtio-pci.h

-- 
2.52.0



             reply	other threads:[~2026-03-04  3:00 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-04  2:59 jrossi [this message]
2026-03-04  2:59 ` [PATCH v4 01/15] pc-bios/s390-ccw: Fix misattributed function prototypes jrossi
2026-03-04  2:59 ` [PATCH v4 02/15] pc-bios/s390-ccw: Remove redundant vring schid attribute jrossi
2026-03-04  2:59 ` [PATCH v4 03/15] pc-bios/s390-ccw: Always reset virtio device on failed boot attempt jrossi
2026-03-04  8:23   ` Thomas Huth
2026-03-04 13:39   ` Eric Farman
2026-03-04  2:59 ` [PATCH v4 04/15] s390x: Remove duplicate definitions of IPL types jrossi
2026-03-04  8:34   ` Thomas Huth
2026-03-04  2:59 ` [PATCH v4 05/15] pc-bios/s390-ccw: Store device type independent of sense data jrossi
2026-03-04  2:59 ` [PATCH v4 06/15] pc-bios/s390-ccw: Split virtio-ccw and generic virtio jrossi
2026-03-04  8:42   ` Thomas Huth
2026-03-05 15:43   ` Eric Farman
2026-03-04  2:59 ` [PATCH v4 07/15] include/hw/s390x: Move CLP definitions for easier BIOS access jrossi
2026-03-04  2:59 ` [PATCH v4 08/15] pc-bios/s390-ccw: Introduce CLP Architecture jrossi
2026-03-04 14:05   ` Eric Farman
2026-03-04  2:59 ` [PATCH v4 09/15] s390x: Add definitions for PCI IPL type jrossi
2026-03-04  2:59 ` [PATCH v4 10/15] pc-bios/s390-ccw: Introduce PCI device jrossi
2026-03-04  9:10   ` Thomas Huth
2026-03-04 14:35     ` Jared Rossi
2026-03-04  2:59 ` [PATCH v4 11/15] pc-bios/s390-ccw: Introduce virtio-pci functions jrossi
2026-03-04  9:18   ` Thomas Huth
2026-03-04 14:38     ` Jared Rossi
2026-03-05 18:37   ` Eric Farman
2026-03-04  2:59 ` [PATCH v4 12/15] pc-bios/s390-ccw: Add support for virtio-blk-pci IPL jrossi
2026-03-04  9:53   ` Thomas Huth
2026-03-04 14:29     ` Jared Rossi
2026-03-04 14:39       ` Thomas Huth
2026-03-04 20:17         ` Jared Rossi
2026-03-05  6:16           ` Thomas Huth
2026-03-05 22:25   ` Eric Farman
2026-03-04  2:59 ` [PATCH v4 13/15] s390x: Build IPLB for virtio-pci devices jrossi
2026-03-05 22:30   ` Eric Farman
2026-03-04  2:59 ` [PATCH v4 14/15] hw: Add "loadparm" property to virtio block PCI devices booting on s390x jrossi
2026-03-04  9:59   ` Thomas Huth
2026-03-04  2:59 ` [PATCH v4 15/15] tests/qtest: Add s390x PCI boot test to cdrom-test.c jrossi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260304025917.2157032-1-jrossi@linux.ibm.com \
    --to=jrossi@linux.ibm.com \
    --cc=alifm@linux.ibm.com \
    --cc=farman@linux.ibm.com \
    --cc=jjherne@linux.ibm.com \
    --cc=mjrosato@linux.ibm.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=thuth@redhat.com \
    --cc=zycai@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.