From: Jad Keskes <inasj268@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev, Jad Keskes <inasj268@gmail.com>
Subject: [PATCH] staging: sm750fb: fix CamelCase naming crimes
Date: Tue, 17 Mar 2026 17:42:26 +0000 [thread overview]
Message-ID: <20260317174226.167865-1-inasj268@gmail.com> (raw)
The sm750fb driver had several variables using CamelCase, which is
discouraged in the Linux kernel coding style.
Rename the following variables to use snake_case:
- pvMem -> pv_mem
- pvReg -> pv_reg
- fixId -> fix_id
- initParm -> init_parm
- powerMode -> power_mode
- setAllEngOff -> set_all_eng_off
- resetMemory -> reset_memory
This improves readability and brings the driver closer to the
official kernel coding standards.
Signed-off-by: Jad Keskes <inasj268@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 38 +++++++++++++++---------------
drivers/staging/sm750fb/sm750.h | 12 +++++-----
drivers/staging/sm750fb/sm750_hw.c | 24 +++++++++----------
3 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index fecd7457e..967fd2180 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -624,27 +624,27 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
output->paths = sm750_pnc;
crtc->channel = sm750_primary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->pv_mem;
pr_info("use simul primary mode\n");
break;
case sm750_simul_sec:
output->paths = sm750_pnc;
crtc->channel = sm750_secondary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->pv_mem;
break;
case sm750_dual_normal:
if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_primary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->pv_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_secondary;
/* not consider of padding stuffs for o_screen,need fix */
crtc->o_screen = sm750_dev->vidmem_size >> 1;
- crtc->v_screen = sm750_dev->pvMem + crtc->o_screen;
+ crtc->v_screen = sm750_dev->pv_mem + crtc->o_screen;
}
break;
case sm750_dual_swap:
@@ -652,7 +652,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
output->paths = sm750_panel;
crtc->channel = sm750_secondary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->pv_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_primary;
@@ -660,7 +660,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
* need fix
*/
crtc->o_screen = sm750_dev->vidmem_size >> 1;
- crtc->v_screen = sm750_dev->pvMem + crtc->o_screen;
+ crtc->v_screen = sm750_dev->pv_mem + crtc->o_screen;
}
break;
default:
@@ -740,7 +740,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
"kernel HELPERS prepared vesa_modes",
};
- static const char *fixId[2] = {
+ static const char *fix_id[2] = {
"sm750_fb1", "sm750_fb2",
};
@@ -764,14 +764,14 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
* must be set after crtc member initialized
*/
crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
- crtc->cursor.mmio = sm750_dev->pvReg +
+ crtc->cursor.mmio = sm750_dev->pv_reg +
0x800f0 + (int)crtc->channel * 0x140;
pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
crtc->cursor.max_h = 64;
crtc->cursor.max_w = 64;
crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8;
- crtc->cursor.vstart = sm750_dev->pvMem + crtc->cursor.offset;
+ crtc->cursor.vstart = sm750_dev->pv_mem + crtc->cursor.offset;
memset_io(crtc->cursor.vstart, 0, crtc->cursor.size);
if (!g_hwcursor)
@@ -862,7 +862,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
fix->ywrapstep = crtc->ywrapstep;
fix->accel = FB_ACCEL_SMI;
- strscpy(fix->id, fixId[index], sizeof(fix->id));
+ strscpy(fix->id, fix_id[index], sizeof(fix->id));
fix->smem_start = crtc->o_screen + sm750_dev->vidmem_start;
pr_info("fix->smem_start = %lx\n", fix->smem_start);
@@ -918,12 +918,12 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
swap = 0;
- sm750_dev->initParm.chip_clk = 0;
- sm750_dev->initParm.mem_clk = 0;
- sm750_dev->initParm.master_clk = 0;
- sm750_dev->initParm.powerMode = 0;
- sm750_dev->initParm.setAllEngOff = 0;
- sm750_dev->initParm.resetMemory = 1;
+ sm750_dev->init_parm.chip_clk = 0;
+ sm750_dev->init_parm.mem_clk = 0;
+ sm750_dev->init_parm.master_clk = 0;
+ sm750_dev->init_parm.power_mode = 0;
+ sm750_dev->init_parm.set_all_eng_off = 0;
+ sm750_dev->init_parm.reset_memory = 1;
/* defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
@@ -1090,7 +1090,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
sm750_dev->mtrr.vram = arch_phys_wc_add(sm750_dev->vidmem_start,
sm750_dev->vidmem_size);
- memset_io(sm750_dev->pvMem, 0, sm750_dev->vidmem_size);
+ memset_io(sm750_dev->pv_mem, 0, sm750_dev->vidmem_size);
pci_set_drvdata(pdev, sm750_dev);
@@ -1121,8 +1121,8 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
sm750fb_framebuffer_release(sm750_dev);
arch_phys_wc_del(sm750_dev->mtrr.vram);
- iounmap(sm750_dev->pvReg);
- iounmap(sm750_dev->pvMem);
+ iounmap(sm750_dev->pv_reg);
+ iounmap(sm750_dev->pv_mem);
kfree(g_settings);
}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index fcb7d586e..f17a2392f 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -39,13 +39,13 @@ enum sm750_path {
};
struct init_status {
- ushort powerMode;
+ ushort power_mode;
/* below three clocks are in unit of MHZ*/
ushort chip_clk;
ushort mem_clk;
ushort master_clk;
- ushort setAllEngOff;
- ushort resetMemory;
+ ushort set_all_eng_off;
+ ushort reset_memory;
};
struct lynx_accel {
@@ -97,12 +97,12 @@ struct sm750_dev {
unsigned long vidreg_start;
__u32 vidmem_size;
__u32 vidreg_size;
- void __iomem *pvReg;
- unsigned char __iomem *pvMem;
+ void __iomem *pv_reg;
+ unsigned char __iomem *pv_mem;
/* locks*/
spinlock_t slock;
- struct init_status initParm;
+ struct init_status init_parm;
enum sm750_pnltype pnltype;
enum sm750_dataflow dataflow;
int nocrt;
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index ce46f240c..ce6a0d2eb 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -49,19 +49,19 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
}
/* now map mmio and vidmem */
- sm750_dev->pvReg =
+ sm750_dev->pv_reg =
ioremap(sm750_dev->vidreg_start, sm750_dev->vidreg_size);
- if (!sm750_dev->pvReg) {
+ if (!sm750_dev->pv_reg) {
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
}
- pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
+ pr_info("mmio virtual addr = %p\n", sm750_dev->pv_reg);
- sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
- sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+ sm750_dev->accel.dpr_base = sm750_dev->pv_reg + DE_BASE_ADDR_TYPE1;
+ sm750_dev->accel.dp_port_base = sm750_dev->pv_reg + DE_PORT_ADDR_TYPE1;
- mmio750 = sm750_dev->pvReg;
+ mmio750 = sm750_dev->pv_reg;
sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -76,15 +76,15 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
sm750_dev->vidmem_start, sm750_dev->vidmem_size);
/* reserve the vidmem space of smi adaptor */
- sm750_dev->pvMem =
+ sm750_dev->pv_mem =
ioremap_wc(sm750_dev->vidmem_start, sm750_dev->vidmem_size);
- if (!sm750_dev->pvMem) {
- iounmap(sm750_dev->pvReg);
+ if (!sm750_dev->pv_mem) {
+ iounmap(sm750_dev->pv_reg);
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
}
- pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
+ pr_info("video memory vaddr = %p\n", sm750_dev->pv_mem);
exit:
return ret;
}
@@ -93,7 +93,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
{
struct init_status *parm;
- parm = &sm750_dev->initParm;
+ parm = &sm750_dev->init_parm;
if (parm->chip_clk == 0)
parm->chip_clk = (sm750_get_chip_type() == SM750LE) ?
DEFAULT_SM750LE_CHIP_CLOCK :
@@ -104,7 +104,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
if (parm->master_clk == 0)
parm->master_clk = parm->chip_clk / 3;
- ddk750_init_hw((struct initchip_param *)&sm750_dev->initParm);
+ ddk750_init_hw((struct initchip_param *)&sm750_dev->init_parm);
/* for sm718, open pci burst */
if (sm750_dev->devid == 0x718) {
poke32(SYSTEM_CTRL,
--
2.53.0
next reply other threads:[~2026-03-17 17:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-17 17:42 Jad Keskes [this message]
2026-03-18 15:25 ` [PATCH] staging: sm750fb: fix CamelCase naming crimes Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260317174226.167865-1-inasj268@gmail.com \
--to=inasj268@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.