From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 1/2] mtd: partitions: redboot: fix style issues
Date: Fri, 20 Mar 2026 17:55:25 -0400 [thread overview]
Message-ID: <20260320215526.133494-1-sashal@kernel.org> (raw)
In-Reply-To: <2026032025-scanning-frying-8ead@gregkh>
From: Corentin Labbe <clabbe@baylibre.com>
[ Upstream commit eb1765c40530ccc8690b9dad88cec6aaa6bfb498 ]
This patch fixes easy checkpatch issues.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210520114851.1274609-2-clabbe@baylibre.com
Stable-dep-of: 8e2f8020270a ("mtd: Avoid boot crash in RedBoot partition table parser")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/parsers/redboot.c | 69 +++++++++++++++++------------------
1 file changed, 34 insertions(+), 35 deletions(-)
diff --git a/drivers/mtd/parsers/redboot.c b/drivers/mtd/parsers/redboot.c
index 3351be6514732..3b55b676ca6b9 100644
--- a/drivers/mtd/parsers/redboot.c
+++ b/drivers/mtd/parsers/redboot.c
@@ -17,15 +17,15 @@
#include <linux/module.h>
struct fis_image_desc {
- unsigned char name[16]; // Null terminated name
- uint32_t flash_base; // Address within FLASH of image
- uint32_t mem_base; // Address in memory where it executes
- uint32_t size; // Length of image
- uint32_t entry_point; // Execution entry point
- uint32_t data_length; // Length of actual data
- unsigned char _pad[256-(16+7*sizeof(uint32_t))];
- uint32_t desc_cksum; // Checksum over image descriptor
- uint32_t file_cksum; // Checksum over image data
+ unsigned char name[16]; // Null terminated name
+ u32 flash_base; // Address within FLASH of image
+ u32 mem_base; // Address in memory where it executes
+ u32 size; // Length of image
+ u32 entry_point; // Execution entry point
+ u32 data_length; // Length of actual data
+ unsigned char _pad[256 - (16 + 7 * sizeof(u32))];
+ u32 desc_cksum; // Checksum over image descriptor
+ u32 file_cksum; // Checksum over image data
};
struct fis_list {
@@ -91,12 +91,12 @@ static int parse_redboot_partitions(struct mtd_info *master,
parse_redboot_of(master);
- if ( directory < 0 ) {
+ if (directory < 0) {
offset = master->size + directory * master->erasesize;
while (mtd_block_isbad(master, offset)) {
if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+nogood:
+ pr_notice("Failed to find a non-bad block to check for RedBoot partition table\n");
return -EIO;
}
offset -= master->erasesize;
@@ -114,8 +114,8 @@ static int parse_redboot_partitions(struct mtd_info *master,
if (!buf)
return -ENOMEM;
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
+ pr_notice("Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
ret = mtd_read(master, offset, master->erasesize, &retlen,
(void *)buf);
@@ -151,14 +151,13 @@ static int parse_redboot_partitions(struct mtd_info *master,
&& swab32(buf[i].size) < master->erasesize)) {
int j;
/* Update numslots based on actual FIS directory size */
- numslots = swab32(buf[i].size) / sizeof (struct fis_image_desc);
+ numslots = swab32(buf[i].size) / sizeof(struct fis_image_desc);
for (j = 0; j < numslots; ++j) {
-
/* A single 0xff denotes a deleted entry.
* Two of them in a row is the end of the table.
*/
if (buf[j].name[0] == 0xff) {
- if (buf[j].name[1] == 0xff) {
+ if (buf[j].name[1] == 0xff) {
break;
} else {
continue;
@@ -185,8 +184,8 @@ static int parse_redboot_partitions(struct mtd_info *master,
}
if (i == numslots) {
/* Didn't find it */
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
+ pr_notice("No RedBoot partition table detected in %s\n",
+ master->name);
ret = 0;
goto out;
}
@@ -205,7 +204,7 @@ static int parse_redboot_partitions(struct mtd_info *master,
break;
new_fl = kmalloc(sizeof(struct fis_list), GFP_KERNEL);
- namelen += strlen(buf[i].name)+1;
+ namelen += strlen(buf[i].name) + 1;
if (!new_fl) {
ret = -ENOMEM;
goto out;
@@ -214,13 +213,13 @@ static int parse_redboot_partitions(struct mtd_info *master,
if (data && data->origin)
buf[i].flash_base -= data->origin;
else
- buf[i].flash_base &= master->size-1;
+ buf[i].flash_base &= master->size - 1;
/* I'm sure the JFFS2 code has done me permanent damage.
* I now think the following is _normal_
*/
prev = &fl;
- while(*prev && (*prev)->img->flash_base < new_fl->img->flash_base)
+ while (*prev && (*prev)->img->flash_base < new_fl->img->flash_base)
prev = &(*prev)->next;
new_fl->next = *prev;
*prev = new_fl;
@@ -240,7 +239,7 @@ static int parse_redboot_partitions(struct mtd_info *master,
}
}
#endif
- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
+ parts = kzalloc(sizeof(*parts) * nrparts + nulllen + namelen, GFP_KERNEL);
if (!parts) {
ret = -ENOMEM;
@@ -249,23 +248,22 @@ static int parse_redboot_partitions(struct mtd_info *master,
nullname = (char *)&parts[nrparts];
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- if (nulllen > 0) {
+ if (nulllen > 0)
strcpy(nullname, nullstring);
- }
#endif
names = nullname + nulllen;
- i=0;
+ i = 0;
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if (fl->img->flash_base) {
- parts[0].name = nullname;
- parts[0].size = fl->img->flash_base;
- parts[0].offset = 0;
+ parts[0].name = nullname;
+ parts[0].size = fl->img->flash_base;
+ parts[0].offset = 0;
i++;
}
#endif
- for ( ; i<nrparts; i++) {
+ for ( ; i < nrparts; i++) {
parts[i].size = fl->img->size;
parts[i].offset = fl->img->flash_base;
parts[i].name = names;
@@ -273,17 +271,17 @@ static int parse_redboot_partitions(struct mtd_info *master,
strcpy(names, fl->img->name);
#ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
if (!memcmp(names, "RedBoot", 8) ||
- !memcmp(names, "RedBoot config", 15) ||
- !memcmp(names, "FIS directory", 14)) {
+ !memcmp(names, "RedBoot config", 15) ||
+ !memcmp(names, "FIS directory", 14)) {
parts[i].mask_flags = MTD_WRITEABLE;
}
#endif
- names += strlen(names)+1;
+ names += strlen(names) + 1;
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+ if (fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
i++;
- parts[i].offset = parts[i-1].size + parts[i-1].offset;
+ parts[i].offset = parts[i - 1].size + parts[i - 1].offset;
parts[i].size = fl->next->img->flash_base - parts[i].offset;
parts[i].name = nullname;
}
@@ -297,6 +295,7 @@ static int parse_redboot_partitions(struct mtd_info *master,
out:
while (fl) {
struct fis_list *old = fl;
+
fl = fl->next;
kfree(old);
}
--
2.51.0
next prev parent reply other threads:[~2026-03-20 21:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-20 17:33 FAILED: patch "[PATCH] mtd: Avoid boot crash in RedBoot partition table parser" failed to apply to 5.10-stable tree gregkh
2026-03-20 21:55 ` Sasha Levin [this message]
2026-03-20 21:55 ` [PATCH 5.10.y 2/2] mtd: Avoid boot crash in RedBoot partition table parser Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260320215526.133494-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=clabbe@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=miquel.raynal@bootlin.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.