All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pablo Sabater <pabloosabaterr@gmail.com>
To: git@vger.kernel.org
Cc: christian.couder@gmail.com, karthik.188@gmail.com,
	jltobler@gmail.com, ayu.chandekar@gmail.com,
	siddharthasthana31@gmail.com, chandrapratap3519@gmail.com,
	gitster@pobox.com, j6t@kdbg.org,
	Pablo Sabater <pabloosabaterr@gmail.com>
Subject: [GSoC PATCH WIP RFC v3 2/3] graph: truncate graph visual output
Date: Sun, 22 Mar 2026 21:38:00 +0100	[thread overview]
Message-ID: <20260322203801.637769-2-pabloosabaterr@gmail.com> (raw)
In-Reply-To: <20260322203801.637769-1-pabloosabaterr@gmail.com>

Teach graph statuses to stop rendering and add the truncation mark
'.' once they are writing over the lane limit, following
graph_needs_truncation().

Teach graph_output_commit_line to skip the POST_MERGE status when
neither the commit nor the parent is on a visible lane but keep it
when either commit or parent lives in a visible lane.

Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
---
 graph.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 107 insertions(+), 17 deletions(-)

diff --git a/graph.c b/graph.c
index a95c0a9a73..ab0a008af5 100644
--- a/graph.c
+++ b/graph.c
@@ -702,6 +702,20 @@ static void graph_update_columns(struct git_graph *graph)
 		}
 	}
 
+	/*
+	 * If graph_max_lanes is set, cap the padding from the branches
+	 */
+	if (graph->revs->graph_max_lanes > 0) {
+		/*
+		 * Get the maximum width by multiplying the maximum number of
+		 * lanes by the size of the lane "| " and adds the truncation
+		 * mark ". "
+		 */
+		int max_columns_width = graph->revs->graph_max_lanes * 2 + 2;
+		if (graph->width > max_columns_width)
+			graph->width = max_columns_width;
+	}
+
 	/*
 	 * Shrink mapping_size to be the minimum necessary
 	 */
@@ -852,6 +866,10 @@ static void graph_output_padding_line(struct git_graph *graph,
 	 * Output a padding row, that leaves all branch lines unchanged
 	 */
 	for (i = 0; i < graph->num_new_columns; i++) {
+		if (graph_needs_truncation(graph, i)) {
+			graph_line_addstr(line, ". ");
+			break;
+		}
 		graph_line_write_column(line, &graph->new_columns[i], '|');
 		graph_line_addch(line, ' ');
 	}
@@ -909,6 +927,9 @@ static void graph_output_pre_commit_line(struct git_graph *graph,
 			seen_this = 1;
 			graph_line_write_column(line, col, '|');
 			graph_line_addchars(line, ' ', graph->expansion_row);
+		} else if (seen_this && graph_needs_truncation(graph, i)) {
+			graph_line_addstr(line, ". ");
+			break;
 		} else if (seen_this && (graph->expansion_row == 0)) {
 			/*
 			 * This is the first line of the pre-commit output.
@@ -1019,6 +1040,7 @@ static void graph_output_commit_line(struct git_graph *graph, struct graph_line
 	 * children that we have already processed.)
 	 */
 	seen_this = 0;
+
 	for (i = 0; i <= graph->num_columns; i++) {
 		struct column *col = &graph->columns[i];
 		struct commit *col_commit;
@@ -1034,8 +1056,17 @@ static void graph_output_commit_line(struct git_graph *graph, struct graph_line
 			seen_this = 1;
 			graph_output_commit_char(graph, line);
 
+			if (graph_needs_truncation(graph, i)) {
+				graph_line_addch(line, ' ');
+				break;
+			}
+
 			if (graph->num_parents > 2)
 				graph_draw_octopus_merge(graph, line);
+		} else if (graph_needs_truncation(graph, i)) {
+			graph_line_addstr(line, ". ");
+			seen_this = 1;
+			break;
 		} else if (seen_this && (graph->edges_added > 1)) {
 			graph_line_write_column(line, col, '\\');
 		} else if (seen_this && (graph->edges_added == 1)) {
@@ -1071,10 +1102,32 @@ static void graph_output_commit_line(struct git_graph *graph, struct graph_line
 
 	/*
 	 * Update graph->state
-	 */
-	if (graph->num_parents > 1)
-		graph_update_state(graph, GRAPH_POST_MERGE);
-	else if (graph_is_mapping_correct(graph))
+	 *
+	 * If the commit is a merge and the first parent is in a visible lane,
+	 * then the GRAPH_POST_MERGE is needed to draw the merge lane.
+	 * 
+	 * If the commit is over the truncation limit, but the first parent is on
+	 * a visible lane, then we still need the merge lane but truncated.
+	 * 
+	 * If both commit and first parent are over the truncation limit, then
+	 * there's no need to draw the merge lane because it would work as a
+	 * padding lane.
+	 */
+	if (graph->num_parents > 1) {
+		if (!graph_needs_truncation(graph, graph->commit_index)) {
+			graph_update_state(graph, GRAPH_POST_MERGE);
+		} else {
+			struct commit_list *first_parent = first_interesting_parent(graph);
+			int first_parent_col = graph_find_new_column_by_commit(graph, first_parent->item);
+			
+			if (!graph_needs_truncation(graph, first_parent_col))
+				graph_update_state(graph, GRAPH_POST_MERGE);
+			else if (graph_is_mapping_correct(graph))
+				graph_update_state(graph, GRAPH_PADDING);
+			else
+				graph_update_state(graph, GRAPH_COLLAPSING);
+		}
+	} else if (graph_is_mapping_correct(graph))
 		graph_update_state(graph, GRAPH_PADDING);
 	else
 		graph_update_state(graph, GRAPH_COLLAPSING);
@@ -1115,14 +1168,28 @@ static void graph_output_post_merge_line(struct git_graph *graph, struct graph_l
 			int par_column;
 			int idx = graph->merge_layout;
 			char c;
+			int truncated = 0;
 			seen_this = 1;
 
 			for (j = 0; j < graph->num_parents; j++) {
+				unsigned int truncation_max = i + (j > 1 ? j - 1 : 0);
 				par_column = graph_find_new_column_by_commit(graph, parents->item);
 				assert(par_column >= 0);
 
 				c = merge_chars[idx];
 				graph_line_write_column(line, &graph->new_columns[par_column], c);
+
+				if (j >= 2)
+					truncation_max -= 1;
+
+				if (graph_needs_truncation(graph, truncation_max)) {
+					if (j > 0 && !(graph->edges_added > 0))
+						graph_line_addch(line, ' ');
+					graph_line_addstr(line, ". ");
+					truncated = 1;
+					break;
+				}
+
 				if (idx == 2) {
 					if (graph->edges_added > 0 || j < graph->num_parents - 1)
 						graph_line_addch(line, ' ');
@@ -1131,15 +1198,24 @@ static void graph_output_post_merge_line(struct git_graph *graph, struct graph_l
 				}
 				parents = next_interesting_parent(graph, parents);
 			}
+			if (truncated)
+				break;
 			if (graph->edges_added == 0)
 				graph_line_addch(line, ' ');
-
+		} else if (graph_needs_truncation(graph, i)) {
+			graph_line_addstr(line, ". ");
+			break;
 		} else if (seen_this) {
 			if (graph->edges_added > 0)
 				graph_line_write_column(line, col, '\\');
 			else
 				graph_line_write_column(line, col, '|');
-			graph_line_addch(line, ' ');
+			/*
+			 * If it's between two lanes and next would be truncated,
+			 * don't add space padding.
+			 */
+			if (!graph_needs_truncation(graph, i + 1)) 
+				graph_line_addch(line, ' ');
 		} else {
 			graph_line_write_column(line, col, '|');
 			if (graph->merge_layout != 0 || i != graph->commit_index - 1) {
@@ -1170,6 +1246,7 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
 	short used_horizontal = 0;
 	int horizontal_edge = -1;
 	int horizontal_edge_target = -1;
+	int truncated = 0;
 
 	/*
 	 * Swap the mapping and old_mapping arrays
@@ -1285,12 +1362,20 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
 	 */
 	for (i = 0; i < graph->mapping_size; i++) {
 		int target = graph->mapping[i];
-		if (target < 0)
-			graph_line_addch(line, ' ');
-		else if (target * 2 == i)
-			graph_line_write_column(line, &graph->new_columns[target], '|');
-		else if (target == horizontal_edge_target &&
-			 i != horizontal_edge - 1) {
+
+		if (!truncated && graph_needs_truncation(graph, i / 2)) {
+			graph_line_addstr(line, ". ");
+			truncated = 1;
+		}
+
+		if (target < 0) {
+			if (!truncated)
+				graph_line_addch(line, ' ');
+		} else if (target * 2 == i) {
+			if (!truncated)
+				graph_line_write_column(line, &graph->new_columns[target], '|');
+		} else if (target == horizontal_edge_target &&
+			   i != horizontal_edge - 1) {
 				/*
 				 * Set the mappings for all but the
 				 * first segment to -1 so that they
@@ -1298,13 +1383,14 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
 				 */
 				if (i != (target * 2)+3)
 					graph->mapping[i] = -1;
-				used_horizontal = 1;
-			graph_line_write_column(line, &graph->new_columns[target], '_');
+			used_horizontal = 1;
+			if (!truncated)
+				graph_line_write_column(line, &graph->new_columns[target], '_');
 		} else {
 			if (used_horizontal && i < horizontal_edge)
 				graph->mapping[i] = -1;
-			graph_line_write_column(line, &graph->new_columns[target], '/');
-
+			if (!truncated)
+				graph_line_write_column(line, &graph->new_columns[target], '/');
 		}
 	}
 
@@ -1353,7 +1439,6 @@ int graph_next_line(struct git_graph *graph, struct strbuf *sb)
 		graph_output_collapsing_line(graph, &line);
 		break;
 	}
-
 	graph_pad_horizontally(graph, &line);
 	return shown_commit_line;
 }
@@ -1378,6 +1463,11 @@ static void graph_padding_line(struct git_graph *graph, struct strbuf *sb)
 	for (i = 0; i < graph->num_columns; i++) {
 		struct column *col = &graph->columns[i];
 
+		if (graph_needs_truncation(graph, i)) {
+			graph_line_addch(&line, '.');
+			break;
+		}
+
 		graph_line_write_column(&line, col, '|');
 
 		if (col->commit == graph->commit && graph->num_parents > 2) {
-- 
2.43.0


  reply	other threads:[~2026-03-22 20:38 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-16 13:34 [GSoC RFC PATCH] graph: add --graph-max option to limit displayed columns Pablo Sabater
2026-03-16 17:04 ` Karthik Nayak
2026-03-16 19:48   ` Pablo
2026-03-17 22:09 ` [GSoC RFC PATCH v2] graph: add --max-columns " Pablo Sabater
2026-03-18 16:05   ` Junio C Hamano
2026-03-18 18:20     ` Pablo
2026-03-19  7:07       ` Johannes Sixt
2026-03-22 19:54   ` [GSoC PATCH WIP RFC v3 0/3] graph: add --graph-lane-limit option Pablo Sabater
2026-03-22 20:37     ` [GSoC PATCH WIP RFC v3 1/3] " Pablo Sabater
2026-03-22 20:38       ` Pablo Sabater [this message]
2026-03-22 20:38       ` [GSoC PATCH WIP RFC v3 3/3] graph: add documentation and testing about --graph-lane-limit Pablo Sabater
2026-03-22 22:09       ` [GSoC PATCH WIP RFC v3 1/3] graph: add --graph-lane-limit option Junio C Hamano
2026-03-23  2:33         ` Pablo
2026-03-23 21:59     ` [GSoC PATCH v4 0/3] " Pablo Sabater
2026-03-23 21:59       ` [GSoC PATCH v4 1/3] " Pablo Sabater
2026-03-25  7:02         ` SZEDER Gábor
2026-03-25 10:03         ` Johannes Sixt
2026-03-25 12:29           ` Pablo
2026-03-23 21:59       ` [GSoC PATCH v4 2/3] graph: truncate graph visual output Pablo Sabater
2026-03-25 10:04         ` Johannes Sixt
2026-03-25 11:19           ` Pablo
2026-03-23 21:59       ` [GSoC PATCH v4 3/3] graph: add documentation and tests about --graph-lane-limit Pablo Sabater
2026-03-25 10:07         ` Johannes Sixt
2026-03-25 11:49           ` Pablo
2026-03-25 10:02       ` [GSoC PATCH v4 0/3] graph: add --graph-lane-limit option Johannes Sixt
2026-03-25 12:28         ` Pablo
2026-03-25 17:44           ` Johannes Sixt
2026-03-25 17:58             ` Pablo
2026-03-25 17:43       ` [GSoC PATCH v5 0/2] " Pablo Sabater
2026-03-25 17:44         ` [GSoC PATCH v5 1/2] " Pablo Sabater
2026-03-25 22:11           ` Junio C Hamano
2026-03-27 14:22             ` Pablo
2026-03-27 16:07               ` Pablo
2026-03-27 16:34               ` Junio C Hamano
2026-03-25 17:44         ` [GSoC PATCH v5 2/2] graph: add documentation and tests about --graph-lane-limit Pablo Sabater
2026-03-28  0:11         ` [GSoC PATCH v6 0/3] graph: add --graph-lane-limit option Pablo Sabater
2026-03-28  0:11           ` [GSoC PATCH v6 1/3] graph: limit the graph width to a hard-coded max Pablo Sabater
2026-03-28  0:11           ` [GSoC PATCH v6 2/3] graph: add --graph-lane-limit option Pablo Sabater
2026-03-28  0:11           ` [GSoC PATCH v6 3/3] graph: add truncation mark to capped lanes Pablo Sabater
2026-03-31 22:14           ` [GSoC PATCH v6 0/3] graph: add --graph-lane-limit option Junio C Hamano
2026-04-01  8:36           ` Johannes Sixt
2026-04-01 14:42             ` Pablo
2026-04-01 16:49               ` Junio C Hamano
2026-04-02  5:53                 ` Pablo
2026-04-02 19:55                   ` Junio C Hamano
2026-04-03 18:56                 ` Tian Yuchen
2026-04-03 19:13                   ` Pablo
2026-04-03 20:15                   ` Junio C Hamano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260322203801.637769-2-pabloosabaterr@gmail.com \
    --to=pabloosabaterr@gmail.com \
    --cc=ayu.chandekar@gmail.com \
    --cc=chandrapratap3519@gmail.com \
    --cc=christian.couder@gmail.com \
    --cc=git@vger.kernel.org \
    --cc=gitster@pobox.com \
    --cc=j6t@kdbg.org \
    --cc=jltobler@gmail.com \
    --cc=karthik.188@gmail.com \
    --cc=siddharthasthana31@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.