From: <gregkh@linuxfoundation.org>
To: Jun.Ma2@amd.com, Rodrigo.Siqueira@amd.com, Roman.Li@amd.com,
Wayne.Lin@amd.com, Xinhui.Pan@amd.com, Zhigang.Luo@amd.com,
airlied@gmail.com, alex.hung@amd.com, alexander.deucher@amd.com,
amd-gfx@lists.freedesktop.org, christian.koenig@amd.com,
daniel@ffwll.ch, decce6@proton.me,
dri-devel@lists.freedesktop.org, evan.quan@amd.com,
gregkh@linuxfoundation.org, harry.wentland@amd.com,
hersenxs.wu@amd.com, lijo.lazar@amd.com,
mario.limonciello@amd.com, ray.wu@amd.com, rosenp@gmail.com,
sashal@kernel.org, spasswolf@web.de,
srinivasan.shanmugam@amd.com, sunpeng.li@amd.com,
superm1@kernel.org, timur.kristof@gmail.com, vulab@iscas.ac.cn
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "drm/amd/display: Add pixel_clock to amd_pp_display_configuration" has been added to the 6.1-stable tree
Date: Mon, 23 Mar 2026 14:03:37 +0100 [thread overview]
Message-ID: <2026032336-ahead-overuse-5fd1@gregkh> (raw)
In-Reply-To: <20260321054453.19683-4-rosenp@gmail.com>
This is a note to let you know that I've just added the patch titled
drm/amd/display: Add pixel_clock to amd_pp_display_configuration
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-amd-display-add-pixel_clock-to-amd_pp_display_configuration.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
From rosenp@gmail.com Sat Mar 21 06:45:19 2026
From: Rosen Penev <rosenp@gmail.com>
Date: Fri, 20 Mar 2026 22:44:52 -0700
Subject: drm/amd/display: Add pixel_clock to amd_pp_display_configuration
To: stable@vger.kernel.org
Cc: "Alex Deucher" <alexander.deucher@amd.com>, "Christian König" <christian.koenig@amd.com>, "Pan, Xinhui" <Xinhui.Pan@amd.com>, "David Airlie" <airlied@gmail.com>, "Daniel Vetter" <daniel@ffwll.ch>, "Harry Wentland" <harry.wentland@amd.com>, "Leo Li" <sunpeng.li@amd.com>, "Rodrigo Siqueira" <Rodrigo.Siqueira@amd.com>, "Evan Quan" <evan.quan@amd.com>, "Mario Limonciello" <mario.limonciello@amd.com>, "Sasha Levin" <sashal@kernel.org>, "Rosen Penev" <rosenp@gmail.com>, "Lijo Lazar" <lijo.lazar@amd.com>, "Ma Jun" <Jun.Ma2@amd.com>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Srinivasan Shanmugam" <srinivasan.shanmugam@amd.com>, "Mario Limonciello (AMD)" <superm1@kernel.org>, "Zhigang Luo" <Zhigang.Luo@amd.com>, "Bert Karwatzki" <spasswolf@web.de>, "Ray Wu" <ray.wu@amd.com>, "Wayne Lin" <Wayne.Lin@amd.com>, "Roman Li" <Roman.Li@amd.com>, "Hersen Wu" <hersenxs.wu@amd.com>, "Timur Kristóf" <timur.kristof@gmail.com>, "Alex Hung" <alex.hung@amd.com>, decce6 <decce6@proton.me>, "Went
ao Liang" <vulab@iscas.ac.cn>, amd-gfx@lists.freedesktop.org (open list:RADEON and AMDGPU DRM DRIVERS), dri-devel@lists.freedesktop.org (open list:DRM DRIVERS), linux-kernel@vger.kernel.org (open list)
Message-ID: <20260321054453.19683-4-rosenp@gmail.com>
From: Timur Kristóf <timur.kristof@gmail.com>
[ Upstream commit b515dcb0dc4e85d8254f5459cfb32fce88dacbfb ]
This commit adds the pixel_clock field to the display config
struct so that power management (DPM) can use it.
We currently don't have a proper bandwidth calculation on old
GPUs with DCE 6-10 because dce_calcs only supports DCE 11+.
So the power management (DPM) on these GPUs may need to make
ad-hoc decisions for display based on the pixel clock.
Also rename sym_clock to pixel_clock in dm_pp_single_disp_config
to avoid confusion with other code where the sym_clock refers to
the DisplayPort symbol clock.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c | 1 +
drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c | 2 +-
drivers/gpu/drm/amd/display/dc/dm_services_types.h | 2 +-
drivers/gpu/drm/amd/include/dm_pp_interface.h | 1 +
4 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
@@ -97,6 +97,7 @@ bool dm_pp_apply_display_requirements(
const struct dm_pp_single_disp_config *dc_cfg =
&pp_display_cfg->disp_configs[i];
adev->pm.pm_display_cfg.displays[i].controller_id = dc_cfg->pipe_idx + 1;
+ adev->pm.pm_display_cfg.displays[i].pixel_clock = dc_cfg->pixel_clock;
}
amdgpu_dpm_display_configuration_change(adev, &adev->pm.pm_display_cfg);
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
@@ -164,7 +164,7 @@ void dce110_fill_display_configs(
stream->link->cur_link_settings.link_rate;
cfg->link_settings.link_spread =
stream->link->cur_link_settings.link_spread;
- cfg->sym_clock = stream->phy_pix_clk;
+ cfg->pixel_clock = stream->phy_pix_clk;
/* Round v_refresh*/
cfg->v_refresh = stream->timing.pix_clk_100hz * 100;
cfg->v_refresh /= stream->timing.h_total;
--- a/drivers/gpu/drm/amd/display/dc/dm_services_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dm_services_types.h
@@ -127,7 +127,7 @@ struct dm_pp_single_disp_config {
uint32_t src_height;
uint32_t src_width;
uint32_t v_refresh;
- uint32_t sym_clock; /* HDMI only */
+ uint32_t pixel_clock; /* Pixel clock in KHz (for HDMI only: normalized) */
struct dc_link_settings link_settings; /* DP only */
};
--- a/drivers/gpu/drm/amd/include/dm_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/dm_pp_interface.h
@@ -66,6 +66,7 @@ struct single_display_configuration
uint32_t view_resolution_cy;
enum amd_pp_display_config_type displayconfigtype;
uint32_t vertical_refresh; /* for active display */
+ uint32_t pixel_clock; /* Pixel clock in KHz (for HDMI only: normalized) */
};
#define MAX_NUM_DISPLAY 32
Patches currently in stable-queue which might be from rosenp@gmail.com are
queue-6.1/drm-amdgpu-clarify-dc-checks.patch
queue-6.1/drm-amd-pm-use-pm_display_cfg-in-legacy-dpm-v2.patch
queue-6.1/drm-amdgpu-use-proper-dc-check-in-amdgpu_display_supported_domains.patch
queue-6.1/drm-amd-display-add-pixel_clock-to-amd_pp_display_configuration.patch
next prev parent reply other threads:[~2026-03-24 9:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-21 5:44 [PATCHv3 for 6.1 0/4] amdgpu: fix panic on old GPUs Rosen Penev
2026-03-21 5:44 ` [PATCHv3 for 6.1 1/4] drm/amdgpu: use proper DC check in amdgpu_display_supported_domains() Rosen Penev
2026-03-23 13:03 ` Patch "drm/amdgpu: use proper DC check in amdgpu_display_supported_domains()" has been added to the 6.1-stable tree gregkh
2026-03-21 5:44 ` [PATCHv3 for 6.1 2/4] drm/amdgpu: clarify DC checks Rosen Penev
2026-03-23 13:03 ` Patch "drm/amdgpu: clarify DC checks" has been added to the 6.1-stable tree gregkh
2026-03-21 5:44 ` [PATCHv3 for 6.1 3/4] drm/amd/display: Add pixel_clock to amd_pp_display_configuration Rosen Penev
2026-03-23 13:03 ` gregkh [this message]
2026-03-21 5:44 ` [PATCHv3 for 6.1 4/4] drm/amd/pm: Use pm_display_cfg in legacy DPM (v2) Rosen Penev
2026-03-23 13:03 ` Patch "drm/amd/pm: Use pm_display_cfg in legacy DPM (v2)" has been added to the 6.1-stable tree gregkh
2026-03-23 9:29 ` [PATCHv3 for 6.1 0/4] amdgpu: fix panic on old GPUs Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026032336-ahead-overuse-5fd1@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Jun.Ma2@amd.com \
--cc=Rodrigo.Siqueira@amd.com \
--cc=Roman.Li@amd.com \
--cc=Wayne.Lin@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=Zhigang.Luo@amd.com \
--cc=airlied@gmail.com \
--cc=alex.hung@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=decce6@proton.me \
--cc=dri-devel@lists.freedesktop.org \
--cc=evan.quan@amd.com \
--cc=harry.wentland@amd.com \
--cc=hersenxs.wu@amd.com \
--cc=lijo.lazar@amd.com \
--cc=mario.limonciello@amd.com \
--cc=ray.wu@amd.com \
--cc=rosenp@gmail.com \
--cc=sashal@kernel.org \
--cc=spasswolf@web.de \
--cc=srinivasan.shanmugam@amd.com \
--cc=stable-commits@vger.kernel.org \
--cc=sunpeng.li@amd.com \
--cc=superm1@kernel.org \
--cc=timur.kristof@gmail.com \
--cc=vulab@iscas.ac.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.