From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Jiri Pirko <jiri@resnulli.us>, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Donald Hunter <donald.hunter@gmail.com>,
Prathosh Satish <Prathosh.Satish@microchip.com>,
Petr Oros <poros@redhat.com>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/3] dpll: add actual frequency monitoring callback ops
Date: Wed, 25 Mar 2026 20:39:13 +0100 [thread overview]
Message-ID: <20260325193914.124898-3-ivecera@redhat.com> (raw)
In-Reply-To: <20260325193914.124898-1-ivecera@redhat.com>
Add new callback operations for a dpll device:
- freq_monitor_get(..) - to obtain current state of frequency monitor
feature from dpll device,
- freq_monitor_set(..) - to allow feature configuration.
Add new callback operation for a dpll pin:
- actual_freq_get(..) - to obtain the actual (measured) frequency in Hz.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks. The actual_freq_get
pin callback is only invoked when the frequency monitor is enabled.
Execute the set callback upon user requests.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/dpll/dpll_netlink.c | 90 +++++++++++++++++++++++++++++++++++++
include/linux/dpll.h | 12 +++++
2 files changed, 102 insertions(+)
diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
index 83cbd64abf5a4..6fe4ae38cff62 100644
--- a/drivers/dpll/dpll_netlink.c
+++ b/drivers/dpll/dpll_netlink.c
@@ -175,6 +175,26 @@ dpll_msg_add_phase_offset_monitor(struct sk_buff *msg, struct dpll_device *dpll,
return 0;
}
+static int
+dpll_msg_add_freq_monitor(struct sk_buff *msg, struct dpll_device *dpll,
+ struct netlink_ext_ack *extack)
+{
+ const struct dpll_device_ops *ops = dpll_device_ops(dpll);
+ enum dpll_feature_state state;
+ int ret;
+
+ if (ops->freq_monitor_set && ops->freq_monitor_get) {
+ ret = ops->freq_monitor_get(dpll, dpll_priv(dpll),
+ &state, extack);
+ if (ret)
+ return ret;
+ if (nla_put_u32(msg, DPLL_A_FREQUENCY_MONITOR, state))
+ return -EMSGSIZE;
+ }
+
+ return 0;
+}
+
static int
dpll_msg_add_phase_offset_avg_factor(struct sk_buff *msg,
struct dpll_device *dpll,
@@ -400,6 +420,38 @@ static int dpll_msg_add_ffo(struct sk_buff *msg, struct dpll_pin *pin,
ffo);
}
+static int dpll_msg_add_actual_freq(struct sk_buff *msg, struct dpll_pin *pin,
+ struct dpll_pin_ref *ref,
+ struct netlink_ext_ack *extack)
+{
+ const struct dpll_device_ops *dev_ops = dpll_device_ops(ref->dpll);
+ const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
+ struct dpll_device *dpll = ref->dpll;
+ enum dpll_feature_state state;
+ u64 actual_freq;
+ int ret;
+
+ if (!ops->actual_freq_get)
+ return 0;
+ if (dev_ops->freq_monitor_get) {
+ ret = dev_ops->freq_monitor_get(dpll, dpll_priv(dpll),
+ &state, extack);
+ if (ret)
+ return ret;
+ if (state == DPLL_FEATURE_STATE_DISABLE)
+ return 0;
+ }
+ ret = ops->actual_freq_get(pin, dpll_pin_on_dpll_priv(dpll, pin),
+ dpll, dpll_priv(dpll), &actual_freq, extack);
+ if (ret)
+ return ret;
+ if (nla_put_64bit(msg, DPLL_A_PIN_ACTUAL_FREQUENCY,
+ sizeof(actual_freq), &actual_freq, DPLL_A_PIN_PAD))
+ return -EMSGSIZE;
+
+ return 0;
+}
+
static int
dpll_msg_add_pin_freq(struct sk_buff *msg, struct dpll_pin *pin,
struct dpll_pin_ref *ref, struct netlink_ext_ack *extack)
@@ -670,6 +722,9 @@ dpll_cmd_pin_get_one(struct sk_buff *msg, struct dpll_pin *pin,
if (ret)
return ret;
ret = dpll_msg_add_ffo(msg, pin, ref, extack);
+ if (ret)
+ return ret;
+ ret = dpll_msg_add_actual_freq(msg, pin, ref, extack);
if (ret)
return ret;
ret = dpll_msg_add_pin_esync(msg, pin, ref, extack);
@@ -722,6 +777,9 @@ dpll_device_get_one(struct dpll_device *dpll, struct sk_buff *msg,
if (ret)
return ret;
ret = dpll_msg_add_phase_offset_avg_factor(msg, dpll, extack);
+ if (ret)
+ return ret;
+ ret = dpll_msg_add_freq_monitor(msg, dpll, extack);
if (ret)
return ret;
@@ -948,6 +1006,32 @@ dpll_phase_offset_avg_factor_set(struct dpll_device *dpll, struct nlattr *a,
extack);
}
+static int
+dpll_freq_monitor_set(struct dpll_device *dpll, struct nlattr *a,
+ struct netlink_ext_ack *extack)
+{
+ const struct dpll_device_ops *ops = dpll_device_ops(dpll);
+ enum dpll_feature_state state = nla_get_u32(a), old_state;
+ int ret;
+
+ if (!(ops->freq_monitor_set && ops->freq_monitor_get)) {
+ NL_SET_ERR_MSG_ATTR(extack, a,
+ "dpll device not capable of frequency monitor");
+ return -EOPNOTSUPP;
+ }
+ ret = ops->freq_monitor_get(dpll, dpll_priv(dpll), &old_state,
+ extack);
+ if (ret) {
+ NL_SET_ERR_MSG(extack,
+ "unable to get current state of frequency monitor");
+ return ret;
+ }
+ if (state == old_state)
+ return 0;
+
+ return ops->freq_monitor_set(dpll, dpll_priv(dpll), state, extack);
+}
+
static int
dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a,
struct netlink_ext_ack *extack)
@@ -1878,6 +1962,12 @@ dpll_set_from_nlattr(struct dpll_device *dpll, struct genl_info *info)
if (ret)
return ret;
break;
+ case DPLL_A_FREQUENCY_MONITOR:
+ ret = dpll_freq_monitor_set(dpll, a,
+ info->extack);
+ if (ret)
+ return ret;
+ break;
}
}
diff --git a/include/linux/dpll.h b/include/linux/dpll.h
index 2ce295b46b8cd..d14cdc2a37f62 100644
--- a/include/linux/dpll.h
+++ b/include/linux/dpll.h
@@ -52,6 +52,14 @@ struct dpll_device_ops {
int (*phase_offset_avg_factor_get)(const struct dpll_device *dpll,
void *dpll_priv, u32 *factor,
struct netlink_ext_ack *extack);
+ int (*freq_monitor_set)(const struct dpll_device *dpll,
+ void *dpll_priv,
+ enum dpll_feature_state state,
+ struct netlink_ext_ack *extack);
+ int (*freq_monitor_get)(const struct dpll_device *dpll,
+ void *dpll_priv,
+ enum dpll_feature_state *state,
+ struct netlink_ext_ack *extack);
};
struct dpll_pin_ops {
@@ -110,6 +118,10 @@ struct dpll_pin_ops {
int (*ffo_get)(const struct dpll_pin *pin, void *pin_priv,
const struct dpll_device *dpll, void *dpll_priv,
s64 *ffo, struct netlink_ext_ack *extack);
+ int (*actual_freq_get)(const struct dpll_pin *pin, void *pin_priv,
+ const struct dpll_device *dpll, void *dpll_priv,
+ u64 *actual_freq,
+ struct netlink_ext_ack *extack);
int (*esync_set)(const struct dpll_pin *pin, void *pin_priv,
const struct dpll_device *dpll, void *dpll_priv,
u64 freq, struct netlink_ext_ack *extack);
--
2.52.0
next prev parent reply other threads:[~2026-03-25 19:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 19:39 [PATCH net-next 0/3] dpll: add actual frequency monitoring feature Ivan Vecera
2026-03-25 19:39 ` [PATCH net-next 1/3] dpll: add actual frequency monitoring to netlink spec Ivan Vecera
2026-03-26 11:06 ` Vadim Fedorenko
2026-03-26 17:41 ` Ivan Vecera
2026-03-25 19:39 ` Ivan Vecera [this message]
2026-03-26 11:21 ` [PATCH net-next 2/3] dpll: add actual frequency monitoring callback ops Vadim Fedorenko
2026-03-26 17:48 ` Ivan Vecera
2026-03-30 8:52 ` Ivan Vecera
2026-03-30 10:27 ` Vadim Fedorenko
2026-03-25 19:39 ` [PATCH net-next 3/3] dpll: zl3073x: implement actual frequency monitoring Ivan Vecera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260325193914.124898-3-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=Prathosh.Satish@microchip.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=poros@redhat.com \
--cc=skhan@linuxfoundation.org \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.