From: Johan Hovold <johan@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: Johannes Thumshirn <jth@kernel.org>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>,
stable@vger.kernel.org
Subject: [PATCH 1/2] spi: ch341: fix memory leaks on probe failures
Date: Fri, 27 Mar 2026 11:43:04 +0100 [thread overview]
Message-ID: <20260327104305.1309915-2-johan@kernel.org> (raw)
In-Reply-To: <20260327104305.1309915-1-johan@kernel.org>
Make sure to deregister the controller, disable pins, and kill and free
the RX URB on probe failures to mirror disconnect and avoid memory
leaks and use-after-free.
Also add an explicit URB kill on disconnect for symmetry (even if that
is not strictly required as USB core would have stopped it in the
current setup).
Fixes: 8846739f52af ("spi: add ch341a usb2spi driver")
Cc: stable@vger.kernel.org # 6.11
Cc: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/spi/spi-ch341.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-ch341.c b/drivers/spi/spi-ch341.c
index 2fdb1c020339..ea92ba986201 100644
--- a/drivers/spi/spi-ch341.c
+++ b/drivers/spi/spi-ch341.c
@@ -173,17 +173,17 @@ static int ch341_probe(struct usb_interface *intf,
ch341->tx_buf =
devm_kzalloc(&udev->dev, CH341_PACKET_LENGTH, GFP_KERNEL);
- if (!ch341->tx_buf)
- return -ENOMEM;
+ if (!ch341->tx_buf) {
+ ret = -ENOMEM;
+ goto err_free_urb;
+ }
usb_fill_bulk_urb(ch341->rx_urb, udev, ch341->read_pipe, ch341->rx_buf,
ch341->rx_len, ch341_recv, ch341);
ret = usb_submit_urb(ch341->rx_urb, GFP_KERNEL);
- if (ret) {
- usb_free_urb(ch341->rx_urb);
- return -ENOMEM;
- }
+ if (ret)
+ goto err_free_urb;
ctrl->bus_num = -1;
ctrl->mode_bits = SPI_CPHA;
@@ -195,21 +195,34 @@ static int ch341_probe(struct usb_interface *intf,
ret = ch341_config_stream(ch341);
if (ret)
- return ret;
+ goto err_kill_urb;
ret = ch341_enable_pins(ch341, true);
if (ret)
- return ret;
+ goto err_kill_urb;
ret = spi_register_controller(ctrl);
if (ret)
- return ret;
+ goto err_disable_pins;
ch341->spidev = spi_new_device(ctrl, &chip);
- if (!ch341->spidev)
- return -ENOMEM;
+ if (!ch341->spidev) {
+ ret = -ENOMEM;
+ goto err_unregister;
+ }
return 0;
+
+err_unregister:
+ spi_unregister_controller(ctrl);
+err_disable_pins:
+ ch341_enable_pins(ch341, false);
+err_kill_urb:
+ usb_kill_urb(ch341->rx_urb);
+err_free_urb:
+ usb_free_urb(ch341->rx_urb);
+
+ return ret;
}
static void ch341_disconnect(struct usb_interface *intf)
@@ -219,6 +232,7 @@ static void ch341_disconnect(struct usb_interface *intf)
spi_unregister_device(ch341->spidev);
spi_unregister_controller(ch341->ctrl);
ch341_enable_pins(ch341, false);
+ usb_kill_urb(ch341->rx_urb);
usb_free_urb(ch341->rx_urb);
}
--
2.52.0
next prev parent reply other threads:[~2026-03-27 10:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-27 10:43 [PATCH 0/2] spi: ch341: fix memory leaks and use-after-free Johan Hovold
2026-03-27 10:43 ` Johan Hovold [this message]
2026-03-27 10:43 ` [PATCH 2/2] spi: ch341: fix devres lifetime Johan Hovold
2026-04-01 17:21 ` [PATCH 0/2] spi: ch341: fix memory leaks and use-after-free Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260327104305.1309915-2-johan@kernel.org \
--to=johan@kernel.org \
--cc=broonie@kernel.org \
--cc=jth@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.