From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@kernel.org,stable@vger.kernel.org,pfalcato@suse.de,liam.howlett@oracle.com,jeffxu@chromium.org,jannh@google.com,david@kernel.org,antonius@bluedragonsec.com,ljs@kernel.org,akpm@linux-foundation.org
Subject: [to-be-updated] mm-mseal-update-vma-end-correctly-on-merge.patch removed from -mm tree
Date: Fri, 27 Mar 2026 10:52:54 -0700 [thread overview]
Message-ID: <20260327175254.AE7BEC19423@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/mseal: update VMA end correctly on merge
has been removed from the -mm tree. Its filename was
mm-mseal-update-vma-end-correctly-on-merge.patch
This patch was dropped because an updated version will be issued
------------------------------------------------------
From: "Lorenzo Stoakes (Oracle)" <ljs@kernel.org>
Subject: mm/mseal: update VMA end correctly on merge
Date: Fri, 27 Mar 2026 09:06:40 +0000
Previously we stored the end of the current VMA in curr_end, and then upon
iterating to the next VMA updated curr_start to curr_end to advance to the
next VMA.
However, this doesn't take into account the fact that a VMA might be
updated due to a merge by vma_modify_flags(), which can result in curr_end
being stale and thus, upon setting curr_start to curr_end, ending up with
an incorrect curr_start on the next iteration.
Resolve the issue by setting curr_end to vma->vm_end unconditionally to
ensure this value remains updated should this occur.
Link: https://lkml.kernel.org/r/20260327090640.146308-1-ljs@kernel.org
Fixes: 6c2da14ae1e0 ("mm/mseal: rework mseal apply logic")
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reported-by: Antonius <antonius@bluedragonsec.com>
Closes: https://lore.kernel.org/linux-mm/CAK8a0jwWGj9-SgFk0yKFh7i8jMkwKm5b0ao9=kmXWjO54veX2g@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/mseal.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/mm/mseal.c~mm-mseal-update-vma-end-correctly-on-merge
+++ a/mm/mseal.c
@@ -66,7 +66,7 @@ static int mseal_apply(struct mm_struct
prev = vma;
for_each_vma_range(vmi, vma, end) {
- const unsigned long curr_end = MIN(vma->vm_end, end);
+ unsigned long curr_end = MIN(vma->vm_end, end);
if (!(vma->vm_flags & VM_SEALED)) {
vm_flags_t vm_flags = vma->vm_flags | VM_SEALED;
@@ -76,6 +76,7 @@ static int mseal_apply(struct mm_struct
if (IS_ERR(vma))
return PTR_ERR(vma);
vm_flags_set(vma, VM_SEALED);
+ curr_end = vma->vm_end; /* Merge may have updated. */
}
prev = vma;
_
Patches currently in -mm which might be from ljs@kernel.org are
mm-rename-vma-flag-helpers-to-be-more-readable.patch
mm-add-vma_desc_test_all-and-use-it.patch
mm-always-inline-__mk_vma_flags-and-invoked-functions.patch
mm-reintroduce-vma_flags_test-as-a-singular-flag-test.patch
mm-reintroduce-vma_desc_test-as-a-singular-flag-test.patch
tools-testing-vma-add-test-for-vma_flags_test-vma_desc_test.patch
mm-mremap-correct-invalid-map-count-check.patch
mm-abstract-reading-sysctl_max_map_count-and-read_once.patch
mm-mremap-check-map-count-under-mmap-write-lock-and-abstract.patch
mm-vma-add-vma_flags_empty-vma_flags_and-vma_flags_diff_pair.patch
tools-testing-vma-add-unit-tests-flag-empty-diff_pair-and.patch
mm-vma-add-further-vma_flags_t-unions.patch
tools-testing-vma-convert-bulk-of-test-code-to-vma_flags_t.patch
mm-vma-use-new-vma-flags-for-sticky-flags-logic.patch
tools-testing-vma-fix-vma-flag-tests.patch
mm-vma-add-append_vma_flags-helper.patch
tools-testing-vma-add-simple-test-for-append_vma_flags.patch
mm-unexport-vm_brk_flags-and-eliminate-vm_flags-parameter.patch
mm-vma-introduce-vma_flags_same.patch
mm-vma-introduce-_to_-helpers.patch
tools-testing-vma-test-that-legacy-flag-helpers-work-correctly.patch
mm-vma-introduce-vma_test-and-make-inlining-consistent.patch
tools-testing-vma-update-vma-flag-tests-to-test-vma_test.patch
mm-introduce-vma_flags_count-and-vma_test_single_mask.patch
tools-testing-vma-test-vma_flags_countvma_test_single_mask.patch
mm-convert-do_brk_flags-to-use-vma_flags_t.patch
mm-update-vma_supports_mlock-to-use-new-vma-flags.patch
mm-vma-introduce-vma_clear_flags.patch
tools-testing-vma-update-vma-tests-to-test-vma_clear_flags.patch
mm-vma-convert-as-much-as-we-can-in-mm-vmac-to-vma_flags_t.patch
tools-bitmap-add-missing-bitmap_copy-implementation.patch
mm-vma-convert-vma_modify_flags-to-use-vma_flags_t.patch
mm-vma-convert-__mmap_region-to-use-vma_flags_t.patch
mm-simplify-vma-flag-tests-of-excluded-flags.patch
mm-various-small-mmap_prepare-cleanups.patch
mm-add-documentation-for-the-mmap_prepare-file-operation-callback.patch
mm-document-vm_operations_struct-open-the-same-as-close.patch
mm-avoid-deadlock-when-holding-rmap-on-mmap_prepare-error.patch
mm-switch-the-rmap-lock-held-option-off-in-compat-layer.patch
mm-vma-remove-superfluous-map-hold_file_rmap_lock.patch
mm-have-mmap_action_complete-handle-the-rmap-lock-and-unmap.patch
mm-add-vm_ops-mapped-hook.patch
fs-afs-revert-mmap_prepare-change.patch
fs-afs-restore-mmap_prepare-implementation.patch
mm-add-mmap_action_simple_ioremap.patch
misc-open-dice-replace-deprecated-mmap-hook-with-mmap_prepare.patch
hpet-replace-deprecated-mmap-hook-with-mmap_prepare.patch
mtdchar-replace-deprecated-mmap-hook-with-mmap_prepare-clean-up.patch
stm-replace-deprecated-mmap-hook-with-mmap_prepare.patch
staging-vme_user-replace-deprecated-mmap-hook-with-mmap_prepare.patch
mm-allow-handling-of-stacked-mmap_prepare-hooks-in-more-drivers.patch
drivers-hv-vmbus-replace-deprecated-mmap-hook-with-mmap_prepare.patch
uio-replace-deprecated-mmap-hook-with-mmap_prepare-in-uio_info.patch
mm-add-mmap_action_map_kernel_pages.patch
mm-on-remap-assert-that-input-range-within-the-proposed-vma.patch
mm-huge_memory-simplify-vma_is_specal_huge.patch
mm-huge-avoid-big-else-branch-in-zap_huge_pmd.patch
mm-huge_memory-have-zap_huge_pmd-return-a-boolean-add-kdoc.patch
mm-huge_memory-handle-buggy-pmd-entry-in-zap_huge_pmd.patch
mm-huge_memory-add-a-common-exit-path-to-zap_huge_pmd.patch
mm-huge_memory-remove-unnecessary-vm_bug_on_page.patch
mm-huge_memory-deduplicate-zap-deposited-table-call.patch
mm-huge_memory-remove-unnecessary-sanity-checks.patch
mm-huge_memory-use-mm-instead-of-tlb-mm.patch
mm-huge_memory-separate-out-the-folio-part-of-zap_huge_pmd.patch
mm-add-softleaf_is_valid_pmd_entry-pmd_to_softleaf_folio.patch
mm-huge_memory-add-and-use-normal_or_softleaf_folio_pmd.patch
mm-huge_memory-add-and-use-normal_or_softleaf_folio_pmd-fix.patch
mm-huge_memory-add-and-use-has_deposited_pgtable.patch
mm-huge_memory-add-and-use-has_deposited_pgtable-fix.patch
maintainers-update-mglru-entry-to-reflect-current-status.patch
reply other threads:[~2026-03-27 17:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260327175254.AE7BEC19423@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=antonius@bluedragonsec.com \
--cc=david@kernel.org \
--cc=jannh@google.com \
--cc=jeffxu@chromium.org \
--cc=liam.howlett@oracle.com \
--cc=ljs@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=pfalcato@suse.de \
--cc=stable@vger.kernel.org \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.