From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@kernel.org,surenb@google.com,skhan@linuxfoundation.org,rppt@kernel.org,mhocko@suse.com,ljs@kernel.org,lianux.mm@gmail.com,liam.howlett@oracle.com,david@kernel.org,davidgow@google.com,corbet@lwn.net,brendan.higgins@linux.dev,sj@kernel.org,akpm@linux-foundation.org
Subject: [merged mm-stable] mm-damon-core-use-mult_frac.patch removed from -mm tree
Date: Sat, 28 Mar 2026 17:40:34 -0700 [thread overview]
Message-ID: <20260329004035.037CDC4CEF7@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/damon/core: use mult_frac()
has been removed from the -mm tree. Its filename was
mm-damon-core-use-mult_frac.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: SeongJae Park <sj@kernel.org>
Subject: mm/damon/core: use mult_frac()
Date: Sat, 7 Mar 2026 11:53:49 -0800
Patch series "mm/damon: improve/fixup/update ratio calculation, test and
documentation".
Yet another batch of misc/minor improvements and fixups. Use mult_frac()
instead of the worse open-coding for rate calculations (patch 1). Add a
test for a previously found and fixed bug (patch 2). Improve and update
comments and documentations for easier code review and up-to-date
information (patches 3-6). Finally, fix an obvious typo (patch 7).
This patch (of 7):
There are multiple places in core code that do open-code rate
calculations. Use mult_frac(), which is developed for doing that in a way
more safe from overflow and precision loss.
Link: https://lkml.kernel.org/r/20260307195356.203753-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260307195356.203753-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: wang lian <lianux.mm@gmail.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/damon/core.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/mm/damon/core.c~mm-damon-core-use-mult_frac
+++ a/mm/damon/core.c
@@ -665,7 +665,7 @@ static unsigned int damon_accesses_bp_to
static unsigned int damon_nr_accesses_to_accesses_bp(
unsigned int nr_accesses, struct damon_attrs *attrs)
{
- return nr_accesses * 10000 / damon_max_nr_accesses(attrs);
+ return mult_frac(nr_accesses, 10000, damon_max_nr_accesses(attrs));
}
static unsigned int damon_nr_accesses_for_new_attrs(unsigned int nr_accesses,
@@ -1724,7 +1724,7 @@ static unsigned long damon_get_intervals
}
target_access_events = max_access_events * goal_bp / 10000;
target_access_events = target_access_events ? : 1;
- return access_events * 10000 / target_access_events;
+ return mult_frac(access_events, 10000, target_access_events);
}
static unsigned long damon_feed_loop_next_input(unsigned long last_input,
@@ -2204,7 +2204,7 @@ static __kernel_ulong_t damos_get_node_m
numerator = i.totalram - i.freeram;
else /* DAMOS_QUOTA_NODE_MEM_FREE_BP */
numerator = i.freeram;
- return numerator * 10000 / i.totalram;
+ return mult_frac(numerator, 10000, i.totalram);
}
static unsigned long damos_get_node_memcg_used_bp(
@@ -2237,7 +2237,7 @@ static unsigned long damos_get_node_memc
numerator = used_pages;
else /* DAMOS_QUOTA_NODE_MEMCG_FREE_BP */
numerator = i.totalram - used_pages;
- return numerator * 10000 / i.totalram;
+ return mult_frac(numerator, 10000, i.totalram);
}
#else
static __kernel_ulong_t damos_get_node_mem_bp(
@@ -2267,8 +2267,8 @@ static unsigned int damos_get_in_active_
global_node_page_state(NR_LRU_BASE + LRU_INACTIVE_FILE);
total = active + inactive;
if (active_ratio)
- return active * 10000 / total;
- return inactive * 10000 / total;
+ return mult_frac(active, 10000, total);
+ return mult_frac(inactive, 10000, total);
}
static void damos_set_quota_goal_current_value(struct damos_quota_goal *goal)
@@ -2311,8 +2311,8 @@ static unsigned long damos_quota_score(s
damos_for_each_quota_goal(goal, quota) {
damos_set_quota_goal_current_value(goal);
highest_score = max(highest_score,
- goal->current_value * 10000 /
- goal->target_value);
+ mult_frac(goal->current_value, 10000,
+ goal->target_value));
}
return highest_score;
@@ -2342,8 +2342,8 @@ static void damos_set_effective_quota(st
if (quota->ms) {
if (quota->total_charged_ns)
- throughput = mult_frac(quota->total_charged_sz, 1000000,
- quota->total_charged_ns);
+ throughput = mult_frac(quota->total_charged_sz,
+ 1000000, quota->total_charged_ns);
else
throughput = PAGE_SIZE * 1024;
esz = min(throughput * quota->ms, esz);
_
Patches currently in -mm which might be from sj@kernel.org are
mm-damon-sysfs-dealloc-repeat_call_control-if-damon_call-fails.patch
reply other threads:[~2026-03-29 0:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260329004035.037CDC4CEF7@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=brendan.higgins@linux.dev \
--cc=corbet@lwn.net \
--cc=david@kernel.org \
--cc=davidgow@google.com \
--cc=liam.howlett@oracle.com \
--cc=lianux.mm@gmail.com \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mm-commits@vger.kernel.org \
--cc=rppt@kernel.org \
--cc=sj@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.