From: Richard Acayan <mailingradian@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Srinivas Kandagatla <srini@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Richard Acayan <mailingradian@gmail.com>
Subject: [PATCH v5 4/4] arm64: dts: qcom: sdm670: add lpi pinctrl
Date: Tue, 31 Mar 2026 16:06:58 -0400 [thread overview]
Message-ID: <20260331200658.1306-5-mailingradian@gmail.com> (raw)
In-Reply-To: <20260331200658.1306-1-mailingradian@gmail.com>
The Snapdragon 670 has a separate TLMM for audio pins. Add the device
node for it.
Also add reserved GPIOs for the Pixel 3a, which blocks access to the
sensor GPIOs.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
.../boot/dts/qcom/sdm670-google-common.dtsi | 5 ++
arch/arm64/boot/dts/qcom/sdm670.dtsi | 73 +++++++++++++++++++
2 files changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
index 0f57b915186b..b4854801a5f5 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
@@ -522,6 +522,11 @@ rmi4_f12: rmi4-f12@12 {
};
};
+&lpi_tlmm {
+ /* sensor gpios are protected */
+ gpio-reserved-ranges = <0 8>, <12 6>;
+};
+
&mdss {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 5b41f8bac7bc..2d5728c75a93 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -2346,6 +2346,79 @@ lmh_cluster0: lmh@17d78800 {
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ lpi_tlmm: pinctrl@62b40000 {
+ compatible = "qcom,sdm670-lpass-lpi-pinctrl";
+ reg = <0 0x62b40000 0 0x20000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 32>;
+
+ cdc_pdm_default: cdc-pdm-default-state {
+ clk-pins {
+ pins = "gpio18";
+ function = "slimbus_clk";
+ drive-strength = <4>;
+ output-low;
+ };
+
+ sync-pins {
+ pins = "gpio19";
+ function = "pdm_sync";
+ drive-strength = <4>;
+ output-low;
+ };
+
+ tx-pins {
+ pins = "gpio20";
+ function = "pdm_tx";
+ drive-strength = <8>;
+ };
+
+ rx-pins {
+ pins = "gpio21", "gpio23", "gpio25";
+ function = "pdm_rx";
+ drive-strength = <4>;
+ output-low;
+ };
+ };
+
+ cdc_comp_default: cdc-comp-default-state {
+ pins = "gpio22", "gpio24";
+ function = "comp_rx";
+ drive-strength = <4>;
+ };
+
+ cdc_dmic_default: cdc-dmic-default-state {
+ clk1-pins {
+ pins = "gpio26";
+ function = "dmic1_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ clk2-pins {
+ pins = "gpio28";
+ function = "dmic2_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data1-pins {
+ pins = "gpio27";
+ function = "dmic1_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+
+ data2-pins {
+ pins = "gpio29";
+ function = "dmic2_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+ };
};
thermal-zones {
--
2.53.0
next prev parent reply other threads:[~2026-03-31 20:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-31 20:06 [PATCH v5 0/4] SDM670 LPASS LPI pin controller support Richard Acayan
2026-03-31 20:06 ` [PATCH v5 1/4] dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property Richard Acayan
2026-03-31 20:06 ` [PATCH v5 2/4] dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl Richard Acayan
2026-03-31 20:06 ` [PATCH v5 3/4] pinctrl: qcom: add sdm670 lpi tlmm Richard Acayan
2026-03-31 20:06 ` Richard Acayan [this message]
2026-04-07 7:03 ` [PATCH v5 4/4] arm64: dts: qcom: sdm670: add lpi pinctrl Linus Walleij
2026-04-07 7:02 ` [PATCH v5 0/4] SDM670 LPASS LPI pin controller support Linus Walleij
2026-05-13 19:09 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260331200658.1306-5-mailingradian@gmail.com \
--to=mailingradian@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.