[PATCH 07/11] hw/arm/smmuv3-accel: Implement "auto" value for "ssidsize"

[Nathan Chen <nathanc@nvidia.com>]

From: Nathan Chen <nathanc@nvidia.com>

Allow accelerated SMMUv3 SSID size property to be derived from host
IOMMU capabilities. Derive host values using IOMMU_GET_HW_INFO,
retrieving SSID size from IDR1. When the auto SSID size is resolved
to a non-zero value, PASID capability is advertised to the vIOMMU
and accelerated use cases such as Shared Virtual Addressing (SVA)
are supported.

Signed-off-by: Nathan Chen <nathanc@nvidia.com>
---
 hw/arm/smmuv3-accel.c | 14 ++++++++++++--
 hw/arm/smmuv3.c       | 11 +++++------
 2 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/hw/arm/smmuv3-accel.c b/hw/arm/smmuv3-accel.c
index 9e7ec6a930..03393fd7ba 100644
--- a/hw/arm/smmuv3-accel.c
+++ b/hw/arm/smmuv3-accel.c
@@ -56,6 +56,13 @@ static void smmuv3_accel_auto_finalise(SMMUv3State *s,
                                FIELD_EX32(info->idr[3], IDR3, RIL));
     }
 
+    /* Update SSIDSIZE if auto from info */
+    if (s->ssidsize == SSID_SIZE_MODE_AUTO) {
+        /* Store for get_viommu_flags() to determine PASID support */
+        s->idr[1] = FIELD_DP32(s->idr[1], IDR1, SSIDSIZE,
+                               FIELD_EX32(info->idr[1], IDR1, SSIDSIZE));
+    }
+
     accel->auto_finalised = true;
 }
 
@@ -828,7 +835,9 @@ static uint64_t smmuv3_accel_get_viommu_flags(void *opaque)
     SMMUState *bs = opaque;
     SMMUv3State *s = ARM_SMMUV3(bs);
 
-    if (s->ssidsize > SSID_SIZE_MODE_0) {
+    if (s->ssidsize > SSID_SIZE_MODE_0 ||
+        (s->ssidsize == SSID_SIZE_MODE_AUTO &&
+         FIELD_EX32(s->idr[1], IDR1, SSIDSIZE))) {
         flags |= VIOMMU_FLAG_PASID_SUPPORTED;
     }
     return flags;
@@ -952,7 +961,8 @@ void smmuv3_accel_init(SMMUv3State *s)
     smmuv3_accel_as_init(s);
 
     if (s->ats == ON_OFF_AUTO_AUTO ||
-        s->ril == ON_OFF_AUTO_AUTO) {
+        s->ril == ON_OFF_AUTO_AUTO ||
+        s->ssidsize == SSID_SIZE_MODE_AUTO) {
         s->s_accel->auto_mode = true;
     }
 }
diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
index 74cc81ae32..67c499d22b 100644
--- a/hw/arm/smmuv3.c
+++ b/hw/arm/smmuv3.c
@@ -627,7 +627,10 @@ static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg,
     }
 
     /* Multiple context descriptors require SubstreamID support */
-    if (s->ssidsize == SSID_SIZE_MODE_0 && STE_S1CDMAX(ste) != 0) {
+    if ((s->ssidsize == SSID_SIZE_MODE_0 ||
+         (s->ssidsize == SSID_SIZE_MODE_AUTO &&
+          !FIELD_EX32(s->idr[1], IDR1, SSIDSIZE))) &&
+        STE_S1CDMAX(ste) != 0) {
         qemu_log_mask(LOG_UNIMP,
                 "SMMUv3: multiple S1 context descriptors require SubstreamID support. "
                 "Configure ssidsize > 0 (requires accel=on)\n");
@@ -1973,10 +1976,6 @@ static bool smmu_validate_property(SMMUv3State *s, Error **errp)
     }
 #endif
 
-    if (s->ssidsize == SSID_SIZE_MODE_AUTO) {
-        error_setg(errp, "ssidsize auto mode is not supported");
-        return false;
-    }
     if (s->oas != OAS_MODE_44 && s->oas != OAS_MODE_48) {
         error_setg(errp, "QEMU SMMUv3 model only implements 44 and 48 bit"
                    "OAS; other OasMode values are not supported");
@@ -2197,7 +2196,7 @@ static void smmuv3_class_init(ObjectClass *klass, const void *data)
         "A value of N allows SSIDs in the range [0 .. 2^N - 1]. "
         "Valid range is 0-20, where 0 disables SubstreamID support. "
         "Defaults to 0. A value greater than 0 is required to enable "
-        "PASID support. ssidsize=auto is not supported.");
+        "PASID support.");
 }
 
 static int smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu,
-- 
2.43.0