From: kernel test robot <lkp@intel.com>
To: "Georg Müller" <georgmueller@gmx.net>
Cc: oe-kbuild-all@lists.linux.dev
Subject: Re: [RFC PATCH v2 2/4] wifi: rtl8xxxu: handle rate control for 8188e a per mac_id
Date: Fri, 3 Apr 2026 16:41:11 +0800 [thread overview]
Message-ID: <202604022306.eugSFEq7-lkp@intel.com> (raw)
In-Reply-To: <20260313131849.3148013-3-georgmueller@gmx.net>
Hi Georg,
[This is a private test report for your RFC patch.]
kernel test robot noticed the following build errors:
[auto build test ERROR on wireless-next/main]
[also build test ERROR on wireless/main linus/master v7.0-rc6 next-20260401]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Georg-M-ller/wifi-rtl8xxxu-move-dynamic_tx_rpt_timing_counter-from-ra_info-to-priv/20260314-231442
base: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main
patch link: https://lore.kernel.org/r/20260313131849.3148013-3-georgmueller%40gmx.net
patch subject: [RFC PATCH v2 2/4] wifi: rtl8xxxu: handle rate control for 8188e a per mac_id
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20260402/202604022306.eugSFEq7-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 15.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260402/202604022306.eugSFEq7-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202604022306.eugSFEq7-lkp@intel.com/
All errors (new ones prefixed by >>):
In file included from include/linux/workqueue.h:9,
from include/linux/mm_types.h:19,
from include/linux/mmzone.h:22,
from include/linux/gfp.h:7,
from include/linux/firmware.h:8,
from drivers/net/wireless/realtek/rtl8xxxu/core.c:16:
drivers/net/wireless/realtek/rtl8xxxu/core.c: In function 'rtl8xxxu_init_device':
>> include/linux/slab.h:1099:61: error: too few arguments to function 'kmalloc_array_noprof'; expected 3, have 2
1099 | #define kmalloc_array(...) alloc_hooks(kmalloc_array_noprof(__VA_ARGS__))
| ^~~~~~~~~~~~~~~~~~~~
include/linux/alloc_tag.h:251:16: note: in definition of macro 'alloc_hooks_tag'
251 | typeof(_do_alloc) _res; \
| ^~~~~~~~~
include/linux/slab.h:1099:49: note: in expansion of macro 'alloc_hooks'
1099 | #define kmalloc_array(...) alloc_hooks(kmalloc_array_noprof(__VA_ARGS__))
| ^~~~~~~~~~~
drivers/net/wireless/realtek/rtl8xxxu/core.c:4398:33: note: in expansion of macro 'kmalloc_array'
4398 | priv->ra_info = kmalloc_array(RTL8188E_MAX_MAC_ID_NUM, sizeof(*priv->ra_info));
| ^~~~~~~~~~~~~
In file included from include/linux/irq.h:21,
from include/asm-generic/hardirq.h:17,
from ./arch/m68k/include/generated/asm/hardirq.h:1,
from include/linux/hardirq.h:11,
from include/linux/interrupt.h:11,
from include/linux/usb.h:16,
from drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h:9,
from drivers/net/wireless/realtek/rtl8xxxu/core.c:18:
include/linux/slab.h:1091:40: note: declared here
1091 | static inline __alloc_size(1, 2) void *kmalloc_array_noprof(size_t n, size_t size, gfp_t flags)
| ^~~~~~~~~~~~~~~~~~~~
>> include/linux/slab.h:1099:61: error: too few arguments to function 'kmalloc_array_noprof'; expected 3, have 2
1099 | #define kmalloc_array(...) alloc_hooks(kmalloc_array_noprof(__VA_ARGS__))
| ^~~~~~~~~~~~~~~~~~~~
include/linux/alloc_tag.h:255:24: note: in definition of macro 'alloc_hooks_tag'
255 | _res = _do_alloc; \
| ^~~~~~~~~
include/linux/slab.h:1099:49: note: in expansion of macro 'alloc_hooks'
1099 | #define kmalloc_array(...) alloc_hooks(kmalloc_array_noprof(__VA_ARGS__))
| ^~~~~~~~~~~
drivers/net/wireless/realtek/rtl8xxxu/core.c:4398:33: note: in expansion of macro 'kmalloc_array'
4398 | priv->ra_info = kmalloc_array(RTL8188E_MAX_MAC_ID_NUM, sizeof(*priv->ra_info));
| ^~~~~~~~~~~~~
include/linux/slab.h:1091:40: note: declared here
1091 | static inline __alloc_size(1, 2) void *kmalloc_array_noprof(size_t n, size_t size, gfp_t flags)
| ^~~~~~~~~~~~~~~~~~~~
>> include/linux/slab.h:1099:61: error: too few arguments to function 'kmalloc_array_noprof'; expected 3, have 2
1099 | #define kmalloc_array(...) alloc_hooks(kmalloc_array_noprof(__VA_ARGS__))
| ^~~~~~~~~~~~~~~~~~~~
include/linux/alloc_tag.h:258:24: note: in definition of macro 'alloc_hooks_tag'
258 | _res = _do_alloc; \
| ^~~~~~~~~
include/linux/slab.h:1099:49: note: in expansion of macro 'alloc_hooks'
1099 | #define kmalloc_array(...) alloc_hooks(kmalloc_array_noprof(__VA_ARGS__))
| ^~~~~~~~~~~
drivers/net/wireless/realtek/rtl8xxxu/core.c:4398:33: note: in expansion of macro 'kmalloc_array'
4398 | priv->ra_info = kmalloc_array(RTL8188E_MAX_MAC_ID_NUM, sizeof(*priv->ra_info));
| ^~~~~~~~~~~~~
include/linux/slab.h:1091:40: note: declared here
1091 | static inline __alloc_size(1, 2) void *kmalloc_array_noprof(size_t n, size_t size, gfp_t flags)
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/net/wireless/realtek/rtl8xxxu/core.c:4398:31: error: assignment to 'struct rtl8xxxu_ra_info *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
4398 | priv->ra_info = kmalloc_array(RTL8188E_MAX_MAC_ID_NUM, sizeof(*priv->ra_info));
| ^
vim +4398 drivers/net/wireless/realtek/rtl8xxxu/core.c
3917
3918 static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
3919 {
3920 struct rtl8xxxu_priv *priv = hw->priv;
3921 struct device *dev = &priv->udev->dev;
3922 struct rtl8xxxu_fileops *fops = priv->fops;
3923 bool macpower;
3924 u16 mac_id;
3925 int ret;
3926 u8 val8;
3927 u16 val16;
3928 u32 val32;
3929
3930 /* Check if MAC is already powered on */
3931 val8 = rtl8xxxu_read8(priv, REG_CR);
3932 val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR);
3933
3934 /*
3935 * Fix 92DU-VC S3 hang with the reason is that secondary mac is not
3936 * initialized. First MAC returns 0xea, second MAC returns 0x00
3937 */
3938 if (val8 == 0xea || !(val16 & SYS_CLK_MAC_CLK_ENABLE))
3939 macpower = false;
3940 else
3941 macpower = true;
3942
3943 if (fops->needs_full_init)
3944 macpower = false;
3945
3946 ret = fops->power_on(priv);
3947 if (ret < 0) {
3948 dev_warn(dev, "%s: Failed power on\n", __func__);
3949 goto exit;
3950 }
3951
3952 if (!macpower)
3953 rtl8xxxu_init_queue_reserved_page(priv);
3954
3955 ret = rtl8xxxu_init_queue_priority(priv);
3956 dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
3957 if (ret)
3958 goto exit;
3959
3960 /*
3961 * Set RX page boundary
3962 */
3963 rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);
3964
3965 for (int retry = 5; retry >= 0 ; retry--) {
3966 ret = rtl8xxxu_download_firmware(priv);
3967 dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
3968 if (ret != -EAGAIN)
3969 break;
3970 if (retry)
3971 dev_dbg(dev, "%s: retry firmware download\n", __func__);
3972 }
3973 if (ret)
3974 goto exit;
3975 ret = rtl8xxxu_start_firmware(priv);
3976 dev_dbg(dev, "%s: start_firmware %i\n", __func__, ret);
3977 if (ret)
3978 goto exit;
3979
3980 if (fops->phy_init_antenna_selection)
3981 fops->phy_init_antenna_selection(priv);
3982
3983 ret = rtl8xxxu_init_mac(priv);
3984
3985 dev_dbg(dev, "%s: init_mac %i\n", __func__, ret);
3986 if (ret)
3987 goto exit;
3988
3989 ret = rtl8xxxu_init_phy_bb(priv);
3990 dev_dbg(dev, "%s: init_phy_bb %i\n", __func__, ret);
3991 if (ret)
3992 goto exit;
3993
3994 ret = fops->init_phy_rf(priv);
3995 if (ret)
3996 goto exit;
3997
3998 /* Mac APLL Setting */
3999 if (priv->rtl_chip == RTL8192F)
4000 rtl8xxxu_write16_set(priv, REG_AFE_CTRL4, BIT(4) | BIT(15));
4001
4002 /* RFSW Control - clear bit 14 ?? */
4003 if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E &&
4004 priv->rtl_chip != RTL8188E && priv->rtl_chip != RTL8710B &&
4005 priv->rtl_chip != RTL8192F)
4006 rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003);
4007
4008 val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW |
4009 FPGA0_RF_ANTSWB |
4010 ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB) << FPGA0_RF_BD_CTRL_SHIFT);
4011 if (!priv->no_pape) {
4012 val32 |= (FPGA0_RF_PAPE |
4013 (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
4014 }
4015 rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
4016
4017 /* 0x860[6:5]= 00 - why? - this sets antenna B */
4018 if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188E &&
4019 priv->rtl_chip != RTL8710B && priv->rtl_chip != RTL8192F)
4020 rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210);
4021
4022 if (!macpower) {
4023 /*
4024 * Set TX buffer boundary
4025 */
4026 val8 = fops->total_page_num + 1;
4027
4028 rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
4029 rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
4030 rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8);
4031 rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8);
4032 rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
4033 }
4034
4035 /*
4036 * The vendor drivers set PBP for all devices, except 8192e.
4037 * There is no explanation for this in any of the sources.
4038 */
4039 val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
4040 (fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
4041 if (priv->rtl_chip != RTL8192E)
4042 rtl8xxxu_write8(priv, REG_PBP, val8);
4043
4044 dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
4045 if (!macpower) {
4046 ret = fops->llt_init(priv);
4047 if (ret) {
4048 dev_warn(dev, "%s: LLT table init failed\n", __func__);
4049 goto exit;
4050 }
4051
4052 /*
4053 * Chip specific quirks
4054 */
4055 fops->usb_quirks(priv);
4056
4057 /*
4058 * Enable TX report and TX report timer for 8723bu/8188eu/...
4059 */
4060 if (fops->has_tx_report) {
4061 /*
4062 * The RTL8188EU has two types of TX reports:
4063 * rpt_sel=1:
4064 * One report for one frame. We can use this for frames
4065 * with IEEE80211_TX_CTL_REQ_TX_STATUS.
4066 * rpt_sel=2:
4067 * One report for many frames transmitted over a period
4068 * of time. (This is what REG_TX_REPORT_TIME is for.) The
4069 * report includes the number of frames transmitted
4070 * successfully, and the number of unsuccessful
4071 * transmissions. We use this for software rate control.
4072 *
4073 * Bit 0 of REG_TX_REPORT_CTRL is required for both types.
4074 * Bit 1 (TX_REPORT_CTRL_TIMER_ENABLE) is required for
4075 * type 2.
4076 */
4077 val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
4078 if (priv->rtl_chip == RTL8188E)
4079 val8 |= BIT(0);
4080 val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
4081 rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
4082 /* Set MAX RPT MACID */
4083 rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02);
4084 /* TX report Timer. Unit: 32us */
4085 rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0);
4086
4087 /* tmp ps ? */
4088 val8 = rtl8xxxu_read8(priv, 0xa3);
4089 val8 &= 0xf8;
4090 rtl8xxxu_write8(priv, 0xa3, val8);
4091 }
4092
4093 if (priv->rtl_chip == RTL8710B || priv->rtl_chip == RTL8192F)
4094 rtl8xxxu_write8(priv, REG_EARLY_MODE_CONTROL_8710B, 0);
4095 }
4096
4097 /*
4098 * Unit in 8 bytes.
4099 * Get Rx PHY status in order to report RSSI and others.
4100 */
4101 rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4);
4102
4103 if (priv->rtl_chip == RTL8192E) {
4104 rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
4105 rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
4106 } else if (priv->rtl_chip == RTL8188F) {
4107 rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
4108 rtl8xxxu_write32(priv, REG_HISR1, 0xffffffff);
4109 } else if (priv->rtl_chip == RTL8188E) {
4110 rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
4111 val32 = IMR0_PSTIMEOUT | IMR0_TBDER | IMR0_CPWM | IMR0_CPWM2;
4112 rtl8xxxu_write32(priv, REG_HIMR0, val32);
4113 val32 = IMR1_TXERR | IMR1_RXERR | IMR1_TXFOVW | IMR1_RXFOVW;
4114 rtl8xxxu_write32(priv, REG_HIMR1, val32);
4115 val8 = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
4116 val8 |= USB_SPEC_INT_BULK_SELECT;
4117 rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, val8);
4118 } else if (priv->rtl_chip == RTL8710B) {
4119 rtl8xxxu_write32(priv, REG_HIMR0_8710B, 0);
4120 } else if (priv->rtl_chip != RTL8192F) {
4121 /*
4122 * Enable all interrupts - not obvious USB needs to do this
4123 */
4124 rtl8xxxu_write32(priv, REG_HISR, 0xffffffff);
4125 rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
4126 }
4127
4128 /*
4129 * Configure initial WMAC settings
4130 */
4131 val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST |
4132 RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
4133 RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
4134 rtl8xxxu_write32(priv, REG_RCR, val32);
4135 priv->regrcr = val32;
4136
4137 if (fops->init_reg_rxfltmap) {
4138 /* Accept all data frames */
4139 rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
4140
4141 /*
4142 * Since ADF is removed from RCR, ps-poll will not be indicate to driver,
4143 * RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
4144 */
4145 rtl8xxxu_write16(priv, REG_RXFLTMAP1, 0x400);
4146
4147 /* Accept all management frames */
4148 rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
4149 } else {
4150 /*
4151 * Accept all multicast
4152 */
4153 rtl8xxxu_write32(priv, REG_MAR, 0xffffffff);
4154 rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff);
4155 }
4156
4157 /*
4158 * Init adaptive controls
4159 */
4160 val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
4161 val32 &= ~RESPONSE_RATE_BITMAP_ALL;
4162 val32 |= RESPONSE_RATE_RRSR_CCK_ONLY_1M;
4163 rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
4164
4165 /* CCK = 0x0a, OFDM = 0x10 */
4166 rtl8xxxu_set_spec_sifs(priv, 0x10, 0x10);
4167 rtl8xxxu_set_retry(priv, 0x30, 0x30);
4168 rtl8xxxu_set_spec_sifs(priv, 0x0a, 0x10);
4169
4170 /*
4171 * Init EDCA
4172 */
4173 rtl8xxxu_write16(priv, REG_MAC_SPEC_SIFS, 0x100a);
4174
4175 /* Set CCK SIFS */
4176 rtl8xxxu_write16(priv, REG_SIFS_CCK, 0x100a);
4177
4178 /* Set OFDM SIFS */
4179 rtl8xxxu_write16(priv, REG_SIFS_OFDM, 0x100a);
4180
4181 /* TXOP */
4182 rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, 0x005ea42b);
4183 rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, 0x0000a44f);
4184 rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324);
4185 rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226);
4186
4187 /* Set data auto rate fallback retry count */
4188 rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
4189 rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
4190 rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
4191 rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605);
4192
4193 val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL);
4194 val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY;
4195 rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, val8);
4196
4197 /* Set ACK timeout */
4198 rtl8xxxu_write8(priv, REG_ACKTO, 0x40);
4199
4200 /*
4201 * Initialize beacon parameters
4202 */
4203 val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8);
4204 rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16);
4205 rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404);
4206 if (priv->rtl_chip != RTL8188F && priv->rtl_chip != RTL8710B &&
4207 priv->rtl_chip != RTL8192F)
4208 /* Firmware will control REG_DRVERLYINT when power saving is enable, */
4209 /* so don't set this register on STA mode. */
4210 rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME);
4211 rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME);
4212 rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
4213
4214 /*
4215 * Initialize burst parameters
4216 */
4217 if (priv->fops->init_burst)
4218 priv->fops->init_burst(priv);
4219
4220 if (fops->init_aggregation)
4221 fops->init_aggregation(priv);
4222
4223 if (fops->init_reg_pkt_life_time) {
4224 rtl8xxxu_write16(priv, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
4225 rtl8xxxu_write16(priv, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
4226 }
4227
4228 /*
4229 * Enable CCK and OFDM block
4230 */
4231 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
4232 val32 |= (FPGA_RF_MODE_CCK | FPGA_RF_MODE_OFDM);
4233 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
4234
4235 /*
4236 * Invalidate all CAM entries - bit 30 is undocumented
4237 */
4238 rtl8xxxu_write32(priv, REG_CAM_CMD, CAM_CMD_POLLING | BIT(30));
4239
4240 /*
4241 * Start out with default power levels for channel 6, 20MHz
4242 */
4243 fops->set_tx_power(priv, 1, false);
4244
4245 /* Let the 8051 take control of antenna setting */
4246 if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188F &&
4247 priv->rtl_chip != RTL8710B && priv->rtl_chip != RTL8192C) {
4248 val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
4249 val8 |= LEDCFG2_DPDT_SELECT;
4250 rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
4251 }
4252
4253 rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, 0xff);
4254
4255 /* Disable BAR - not sure if this has any effect on USB */
4256 rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff);
4257
4258 if (priv->rtl_chip != RTL8188F && priv->rtl_chip != RTL8188E &&
4259 priv->rtl_chip != RTL8710B && priv->rtl_chip != RTL8192F)
4260 rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
4261
4262 if (fops->init_statistics)
4263 fops->init_statistics(priv);
4264
4265 if (priv->rtl_chip == RTL8192E) {
4266 /*
4267 * 0x4c6[3] 1: RTS BW = Data BW
4268 * 0: RTS BW depends on CCA / secondary CCA result.
4269 */
4270 val8 = rtl8xxxu_read8(priv, REG_QUEUE_CTRL);
4271 val8 &= ~BIT(3);
4272 rtl8xxxu_write8(priv, REG_QUEUE_CTRL, val8);
4273 /*
4274 * Reset USB mode switch setting
4275 */
4276 rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00);
4277 } else if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8188E ||
4278 priv->rtl_chip == RTL8192F) {
4279 /*
4280 * Init GPIO settings for 8188f, 8188e, 8192f
4281 */
4282 val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
4283 val8 &= ~GPIO_MUXCFG_IO_SEL_ENBT;
4284 rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
4285 }
4286
4287 if (priv->rtl_chip == RTL8188F)
4288 /* CCK PD */
4289 rtl8xxxu_write8(priv, REG_CCK_PD_THRESH, CCK_PD_TYPE1_LV1_TH);
4290
4291 fops->phy_lc_calibrate(priv);
4292
4293 fops->phy_iq_calibrate(priv);
4294
4295 /*
4296 * This should enable thermal meter
4297 */
4298 if (fops->gen2_thermal_meter) {
4299 if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) {
4300 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B);
4301 val32 |= 0x30000;
4302 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B, val32);
4303 } else {
4304 rtl8xxxu_write_rfreg(priv,
4305 RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
4306 }
4307 } else {
4308 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60);
4309 }
4310
4311 /* Set NAV_UPPER to 30000us */
4312 val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT);
4313 rtl8xxxu_write8(priv, REG_NAV_UPPER, val8);
4314
4315 if (priv->rtl_chip == RTL8723A) {
4316 /*
4317 * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test,
4318 * but we need to find root cause.
4319 * This is 8723au only.
4320 */
4321 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
4322 if ((val32 & 0xff000000) != 0x83000000) {
4323 val32 |= FPGA_RF_MODE_CCK;
4324 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
4325 }
4326 } else if (priv->rtl_chip == RTL8192E || priv->rtl_chip == RTL8188E) {
4327 rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00);
4328 }
4329
4330 val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL);
4331 val32 |= FWHW_TXQ_CTRL_XMIT_MGMT_ACK;
4332 /* ack for xmit mgmt frames. */
4333 rtl8xxxu_write32(priv, REG_FWHW_TXQ_CTRL, val32);
4334
4335 if (priv->rtl_chip == RTL8192E) {
4336 /*
4337 * Fix LDPC rx hang issue.
4338 */
4339 val32 = rtl8xxxu_read32(priv, REG_AFE_MISC);
4340 rtl8xxxu_write8(priv, REG_8192E_LDOV12_CTRL, 0x75);
4341 val32 &= 0xfff00fff;
4342 val32 |= 0x0007e000;
4343 rtl8xxxu_write32(priv, REG_AFE_MISC, val32);
4344
4345 /*
4346 * 0x824[9] = 0x82C[9] = 0xA80[7] those registers setting
4347 * should be equal or CCK RSSI report may be incorrect
4348 */
4349 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2);
4350 priv->cck_agc_report_type =
4351 u32_get_bits(val32, FPGA0_HSSI_PARM2_CCK_HIGH_PWR);
4352
4353 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_HSSI_PARM2);
4354 if (priv->cck_agc_report_type !=
4355 u32_get_bits(val32, FPGA0_HSSI_PARM2_CCK_HIGH_PWR)) {
4356 if (priv->cck_agc_report_type)
4357 val32 |= FPGA0_HSSI_PARM2_CCK_HIGH_PWR;
4358 else
4359 val32 &= ~FPGA0_HSSI_PARM2_CCK_HIGH_PWR;
4360 rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM2, val32);
4361 }
4362
4363 val32 = rtl8xxxu_read32(priv, REG_AGC_RPT);
4364 if (priv->cck_agc_report_type)
4365 val32 |= AGC_RPT_CCK;
4366 else
4367 val32 &= ~AGC_RPT_CCK;
4368 rtl8xxxu_write32(priv, REG_AGC_RPT, val32);
4369 }
4370
4371 if (priv->rtl_chip == RTL8710B) {
4372 /*
4373 * 0x76D[5:4] is Port0,Port1 Enable Bit.
4374 * This is only for 8710B, 2b'00 for MP and 2b'11 for Normal Driver
4375 */
4376 val8 = rtl8xxxu_read8(priv, REG_PORT_CONTROL_8710B);
4377 val8 |= BIT(5) | BIT(4);
4378 rtl8xxxu_write8(priv, REG_PORT_CONTROL_8710B, val8);
4379
4380 /* Set 0x5c[8] and [2:0] = 1, LDO mode */
4381 val32 = rtl8xxxu_read32(priv, REG_WL_RF_PSS_8710B);
4382 val32 |= 0x107;
4383 rtl8xxxu_write32(priv, REG_WL_RF_PSS_8710B, val32);
4384 }
4385
4386 val32 = rtl8xxxu_read32(priv, 0xa9c);
4387 priv->cck_new_agc = u32_get_bits(val32, BIT(17));
4388
4389 /* Initialise the center frequency offset tracking */
4390 if (priv->fops->set_crystal_cap) {
4391 val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
4392 priv->cfo_tracking.atc_status = val32 & CFO_TRACKING_ATC_STATUS;
4393 priv->cfo_tracking.adjust = true;
4394 priv->cfo_tracking.crystal_cap = priv->default_crystal_cap;
4395 }
4396
4397 if (priv->rtl_chip == RTL8188E) {
> 4398 priv->ra_info = kmalloc_array(RTL8188E_MAX_MAC_ID_NUM, sizeof(*priv->ra_info));
4399 if (!priv->ra_info) {
4400 ret = -ENOMEM;
4401 goto exit;
4402 }
4403 for (mac_id = 0; mac_id < RTL8188E_MAX_MAC_ID_NUM; mac_id++) {
4404 rtl8188e_ra_info_init_all(&priv->ra_info[mac_id]);
4405 }
4406 }
4407 set_bit(RTL8XXXU_BC_MC_MACID, priv->mac_id_map);
4408 set_bit(RTL8XXXU_BC_MC_MACID1, priv->mac_id_map);
4409
4410 exit:
4411 return ret;
4412 }
4413
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2026-04-03 8:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 13:18 [RFC PATCH v2 0/4] wifi: rtl8xxxu: implement AP mode for 8188EU Georg Müller
2026-03-13 13:18 ` [RFC PATCH v2 1/4] wifi: rtl8xxxu: move dynamic_tx_rpt_timing_counter from ra_info to priv Georg Müller
2026-03-13 13:18 ` [RFC PATCH v2 2/4] wifi: rtl8xxxu: handle rate control for 8188e a per mac_id Georg Müller
2026-04-03 8:40 ` kernel test robot
2026-04-03 8:41 ` kernel test robot
2026-04-03 8:41 ` kernel test robot [this message]
2026-03-13 13:18 ` [RFC PATCH v2 3/4] wifi: rtl8xxxu: update max report mac id on station add / remove for 8188e chips Georg Müller
2026-03-13 13:26 ` Georg Müller
2026-03-13 13:18 ` [RFC PATCH v2 4/4] wifi: rtl8xxxu: Enable AP mode for RTL8188EU Georg Müller
2026-07-17 8:02 ` [RFC PATCH v3 0/4] wifi: rtl8xxxu: implement AP mode for 8188EU Mehmet Fide
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202604022306.eugSFEq7-lkp@intel.com \
--to=lkp@intel.com \
--cc=georgmueller@gmx.net \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.