From: David Laight <david.laight.linux@gmail.com>
To: Ranjan Kumar <ranjan.kumar@broadcom.com>
Cc: linux-scsi@vger.kernel.org, martin.petersen@oracle.com,
sathya.prakash@broadcom.com, chandrakanth.patil@broadcom.com,
dlemoal@kernel.org, stable@vger.kernel.org,
Mira Limbeck <m.limbeck@proxmox.com>,
Keith Busch <kbusch@kernel.org>
Subject: Re: [PATCH v3] mpt3sas: Limit NVMe request size to 2 MiB
Date: Mon, 13 Apr 2026 21:33:35 +0100 [thread overview]
Message-ID: <20260413213335.4010d8f2@pumpkin> (raw)
In-Reply-To: <20260413180003.76489-1-ranjan.kumar@broadcom.com>
On Mon, 13 Apr 2026 23:30:03 +0530
Ranjan Kumar <ranjan.kumar@broadcom.com> wrote:
> The HBA firmware reports NVMe MDTS values based on the underlying drive
> capability. However, due to the 4K PRP page size and a limit of
> 512 entries, the driver supports a maximum I/O transfer size of 2 MiB.
>
> Limit max_hw_sectors to the smaller of the reported MDTS and the
> 2 MiB driver limit to prevent issuing oversized I/O that may lead
> to a kernel oops.
>
> Cc: stable@vger.kernel.org
> Fixes: 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP")
> Reported-by: Mira Limbeck <m.limbeck@proxmox.com>
> Closes: https://lore.kernel.org/r/291f78bf-4b4a-40dd-867d-053b36c564b3@proxmox.com
> Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9b8b84879d4a
> Suggested-by: Keith Busch <kbusch@kernel.org>
> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
> ---
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index 6ff788557294..44dd439e6f17 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -2738,8 +2738,20 @@ scsih_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
> pcie_device->enclosure_level,
> pcie_device->connector_name);
>
> + /*
> + * The HBA firmware passes the NVMe drive's MDTS
> + * (Maximum Data Transfer Size) up to the driver. However,
> + * the driver hardcodes a 4K page size for the PRP list,
^ buffer ?
> + * accommodating at most 512 entries. This strictly limits
> + * the maximum supported NVMe I/O transfer to 2 MiB.
Doesn't that make max_fw_entries 4096/8.
Assuming 4096 byte sectors the longest transfer is then 4096/8*4096.
So none of this has anything to to with SECTOR_SHIFT.
> + *
> + * Cap max_hw_sectors to the smaller of the drive's reported
> + * MDTS or the 2 MiB driver limit to prevent kernel oopses.
> + */
> + lim->max_hw_sectors = SZ_2M >> SECTOR_SHIFT;
> if (pcie_device->nvme_mdts)
> - lim->max_hw_sectors = pcie_device->nvme_mdts / 512;
> + lim->max_hw_sectors = min_t(u32, lim->max_hw_sectors,
> + pcie_device->nvme_mdts >> SECTOR_SHIFT);
Why min_t() ?
David
>
> pcie_device_put(pcie_device);
> spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
next prev parent reply other threads:[~2026-04-13 20:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-13 18:00 [PATCH v3] mpt3sas: Limit NVMe request size to 2 MiB Ranjan Kumar
2026-04-13 20:33 ` David Laight [this message]
2026-04-14 3:41 ` Damien Le Moal
2026-04-14 7:12 ` David Laight
2026-04-14 7:21 ` Damien Le Moal
2026-04-14 9:19 ` Ranjan Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260413213335.4010d8f2@pumpkin \
--to=david.laight.linux@gmail.com \
--cc=chandrakanth.patil@broadcom.com \
--cc=dlemoal@kernel.org \
--cc=kbusch@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=m.limbeck@proxmox.com \
--cc=martin.petersen@oracle.com \
--cc=ranjan.kumar@broadcom.com \
--cc=sathya.prakash@broadcom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.