All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: tpluszz77@gmail.com,fw@strlen.de,steffen.klassert@secunet.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] xfrm: hold dev ref until after transport_finish NF_HOOK" failed to apply to 6.6-stable tree
Date: Mon, 13 Apr 2026 14:09:50 +0200	[thread overview]
Message-ID: <2026041350-backlog-discount-4b3a@gregkh> (raw)


The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 1c428b03840094410c5fb6a5db30640486bbbfcb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026041350-backlog-discount-4b3a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 1c428b03840094410c5fb6a5db30640486bbbfcb Mon Sep 17 00:00:00 2001
From: Qi Tang <tpluszz77@gmail.com>
Date: Thu, 2 Apr 2026 19:44:01 +0800
Subject: [PATCH] xfrm: hold dev ref until after transport_finish NF_HOOK

After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.

Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.

For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set.

Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: acf568ee859f ("xfrm: Reinject transport-mode packets through tasklet")
Cc: stable@vger.kernel.org
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c
index f28cfd88eaf5..c2eac844bcdb 100644
--- a/net/ipv4/xfrm4_input.c
+++ b/net/ipv4/xfrm4_input.c
@@ -50,6 +50,7 @@ int xfrm4_transport_finish(struct sk_buff *skb, int async)
 {
 	struct xfrm_offload *xo = xfrm_offload(skb);
 	struct iphdr *iph = ip_hdr(skb);
+	struct net_device *dev = skb->dev;
 
 	iph->protocol = XFRM_MODE_SKB_CB(skb)->protocol;
 
@@ -73,8 +74,10 @@ int xfrm4_transport_finish(struct sk_buff *skb, int async)
 	}
 
 	NF_HOOK(NFPROTO_IPV4, NF_INET_PRE_ROUTING,
-		dev_net(skb->dev), NULL, skb, skb->dev, NULL,
+		dev_net(dev), NULL, skb, dev, NULL,
 		xfrm4_rcv_encap_finish);
+	if (async)
+		dev_put(dev);
 	return 0;
 }
 
diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c
index 9005fc156a20..699a001ac166 100644
--- a/net/ipv6/xfrm6_input.c
+++ b/net/ipv6/xfrm6_input.c
@@ -43,6 +43,7 @@ static int xfrm6_transport_finish2(struct net *net, struct sock *sk,
 int xfrm6_transport_finish(struct sk_buff *skb, int async)
 {
 	struct xfrm_offload *xo = xfrm_offload(skb);
+	struct net_device *dev = skb->dev;
 	int nhlen = -skb_network_offset(skb);
 
 	skb_network_header(skb)[IP6CB(skb)->nhoff] =
@@ -68,8 +69,10 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async)
 	}
 
 	NF_HOOK(NFPROTO_IPV6, NF_INET_PRE_ROUTING,
-		dev_net(skb->dev), NULL, skb, skb->dev, NULL,
+		dev_net(dev), NULL, skb, dev, NULL,
 		xfrm6_transport_finish2);
+	if (async)
+		dev_put(dev);
 	return 0;
 }
 
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index dc1312ed5a09..f65291eba1f6 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -506,7 +506,6 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 		/* An encap_type of -1 indicates async resumption. */
 		if (encap_type == -1) {
 			async = 1;
-			dev_put(skb->dev);
 			seq = XFRM_SKB_CB(skb)->seq.input.low;
 			spin_lock(&x->lock);
 			goto resume;
@@ -659,8 +658,11 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 			dev_hold(skb->dev);
 
 			nexthdr = x->type->input(x, skb);
-			if (nexthdr == -EINPROGRESS)
+			if (nexthdr == -EINPROGRESS) {
+				if (async)
+					dev_put(skb->dev);
 				return 0;
+			}
 
 			dev_put(skb->dev);
 			spin_lock(&x->lock);
@@ -695,9 +697,11 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 		XFRM_MODE_SKB_CB(skb)->protocol = nexthdr;
 
 		err = xfrm_inner_mode_input(x, skb);
-		if (err == -EINPROGRESS)
+		if (err == -EINPROGRESS) {
+			if (async)
+				dev_put(skb->dev);
 			return 0;
-		else if (err) {
+		} else if (err) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATEMODEERROR);
 			goto drop;
 		}
@@ -734,6 +738,8 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 			sp->olen = 0;
 		if (skb_valid_dst(skb))
 			skb_dst_drop(skb);
+		if (async)
+			dev_put(skb->dev);
 		gro_cells_receive(&gro_cells, skb);
 		return 0;
 	} else {
@@ -753,6 +759,8 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 				sp->olen = 0;
 			if (skb_valid_dst(skb))
 				skb_dst_drop(skb);
+			if (async)
+				dev_put(skb->dev);
 			gro_cells_receive(&gro_cells, skb);
 			return err;
 		}
@@ -763,6 +771,8 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 drop_unlock:
 	spin_unlock(&x->lock);
 drop:
+	if (async)
+		dev_put(skb->dev);
 	xfrm_rcv_cb(skb, family, x && x->type ? x->type->proto : nexthdr, -1);
 	kfree_skb(skb);
 	return 0;


                 reply	other threads:[~2026-04-13 12:10 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026041350-backlog-discount-4b3a@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=fw@strlen.de \
    --cc=stable@vger.kernel.org \
    --cc=steffen.klassert@secunet.com \
    --cc=tpluszz77@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.