All of lore.kernel.org
 help / color / mirror / Atom feed
From: Felix Gu <ustc.gu@gmail.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	 Daniel Lezcano <daniel.lezcano@kernel.org>,
	Zhang Rui <rui.zhang@intel.com>,
	 Lukasz Luba <lukasz.luba@arm.com>, Frank Li <Frank.Li@nxp.com>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	 Oleksij Rempel <o.rempel@pengutronix.de>
Cc: linux-pm@vger.kernel.org, imx@lists.linux.dev,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  Felix Gu <ustc.gu@gmail.com>
Subject: [PATCH v2 1/2] thermal/drivers/imx: Fix thermal zone leak on probe error path
Date: Wed, 15 Apr 2026 21:10:27 +0800	[thread overview]
Message-ID: <20260415-imx-v2-1-aeacff9e72b2@gmail.com> (raw)
In-Reply-To: <20260415-imx-v2-0-aeacff9e72b2@gmail.com>

If pm_runtime_resume_and_get() fails after the thermal zone has been
registered, the probe error path cleans up runtime PM but skips
thermal_zone_device_unregister(), leaking the thermal zone device.

Switch to use devm_thermal_of_zone_register() to fix the problem.

Fixes: 4cf2ddf16e17 ("thermal/drivers/imx: Implement runtime PM support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
 drivers/thermal/imx_thermal.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 38c993d1bcb3..3729c3eac748 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -216,6 +216,20 @@ struct imx_thermal_data {
 	const char *temp_grade;
 };
 
+static int imx_thermal_sync_zone_trip(struct thermal_trip *trip, void *arg)
+{
+	struct imx_thermal_data *data = arg;
+	int temp;
+
+	if (trip->type != THERMAL_TRIP_PASSIVE && trip->type != THERMAL_TRIP_CRITICAL)
+		return 0;
+
+	temp = trips[trip->type].temperature;
+	thermal_zone_set_trip_temp(data->tz, trip, temp);
+
+	return 0;
+}
+
 static void imx_set_panic_temp(struct imx_thermal_data *data,
 			       int panic_temp)
 {
@@ -679,13 +693,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		goto legacy_cleanup;
 	}
 
-	data->tz = thermal_zone_device_register_with_trips("imx_thermal_zone",
-							   trips,
-							   ARRAY_SIZE(trips),
-							   data,
-							   &imx_tz_ops, NULL,
-							   IMX_PASSIVE_DELAY,
-							   IMX_POLLING_DELAY);
+	data->irq_enabled = true;
+	data->tz = devm_thermal_of_zone_register(dev, 0, data, &imx_tz_ops);
 	if (IS_ERR(data->tz)) {
 		ret = PTR_ERR(data->tz);
 		dev_err(dev, "failed to register thermal zone device %d\n",
@@ -693,6 +702,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
+	thermal_zone_for_each_trip(data->tz, imx_thermal_sync_zone_trip, data);
+
 	dev_info(dev, "%s CPU temperature grade - max:%dC"
 		 " critical:%dC passive:%dC\n", data->temp_grade,
 		 data->temp_max / 1000, trips[IMX_TRIP_CRITICAL].temperature / 1000,
@@ -724,25 +735,18 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto disable_runtime_pm;
 
-	data->irq_enabled = true;
-	ret = thermal_zone_device_enable(data->tz);
-	if (ret)
-		goto thermal_zone_unregister;
-
 	ret = devm_request_threaded_irq(dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
 			0, "imx_thermal", data);
 	if (ret < 0) {
 		dev_err(dev, "failed to request alarm irq: %d\n", ret);
-		goto thermal_zone_unregister;
+		goto disable_runtime_pm;
 	}
 
 	pm_runtime_put(data->dev);
 
 	return 0;
 
-thermal_zone_unregister:
-	thermal_zone_device_unregister(data->tz);
 disable_runtime_pm:
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
@@ -761,7 +765,6 @@ static void imx_thermal_remove(struct platform_device *pdev)
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
 
-	thermal_zone_device_unregister(data->tz);
 	imx_thermal_unregister_legacy_cooling(data);
 }
 

-- 
2.43.0


  reply	other threads:[~2026-04-15 13:10 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-15 13:10 [PATCH v2 0/2] thermal/drivers/imx: two fixes Felix Gu
2026-04-15 13:10 ` Felix Gu [this message]
2026-04-16 13:04   ` [PATCH v2 1/2] thermal/drivers/imx: Fix thermal zone leak on probe error path Felix Gu
2026-04-17  8:16     ` Frank Li
2026-04-15 13:10 ` [PATCH v2 2/2] thermal/drivers/imxl:Fix runtime PM handling on early returns Felix Gu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260415-imx-v2-1-aeacff9e72b2@gmail.com \
    --to=ustc.gu@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=daniel.lezcano@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=o.rempel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.