From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,ziy@nvidia.com,rppt@kernel.org,npache@redhat.com,ljs@kernel.org,liwang@redhat.com,david@kernel.org,chuhu@redhat.com,akpm@linux-foundation.org
Subject: [merged mm-stable] selftests-mm-soft-dirty-skip-two-tests-when-thp-is-not-available.patch removed from -mm tree
Date: Sat, 18 Apr 2026 00:57:46 -0700 [thread overview]
Message-ID: <20260418075751.AF99AC19424@smtp.kernel.org> (raw)
The quilt patch titled
Subject: selftests/mm: soft-dirty: skip two tests when thp is not available
has been removed from the -mm tree. Its filename was
selftests-mm-soft-dirty-skip-two-tests-when-thp-is-not-available.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Chunyu Hu <chuhu@redhat.com>
Subject: selftests/mm: soft-dirty: skip two tests when thp is not available
Date: Thu, 2 Apr 2026 09:45:39 +0800
The test_hugepage test contain two sub tests. If just reporting one skip
when thp not available, there will be error in the log because the test
count don't match the test plan. Change to skip two tests by running the
ksft_test_result_skip twice in this case.
Without the fix (run test on thp disabled kernel):
./run_vmtests.sh -t soft_dirty
# --------------------
# running ./soft-dirty
# --------------------
# TAP version 13
# 1..19
# ok 1 Test test_simple
# ok 2 Test test_vma_reuse dirty bit of allocated page
# ok 3 Test test_vma_reuse dirty bit of reused address page
# ok 4 # SKIP Transparent Hugepages not available
# ok 5 Test test_mprotect-anon dirty bit of new written page
# ok 6 Test test_mprotect-anon soft-dirty clear after clear_refs
# ok 7 Test test_mprotect-anon soft-dirty clear after marking RO
# ok 8 Test test_mprotect-anon soft-dirty clear after marking RW
# ok 9 Test test_mprotect-anon soft-dirty after rewritten
# ok 10 Test test_mprotect-file dirty bit of new written page
# ok 11 Test test_mprotect-file soft-dirty clear after clear_refs
# ok 12 Test test_mprotect-file soft-dirty clear after marking RO
# ok 13 Test test_mprotect-file soft-dirty clear after marking RW
# ok 14 Test test_mprotect-file soft-dirty after rewritten
# ok 15 Test test_merge-anon soft-dirty after remap merge 1st pg
# ok 16 Test test_merge-anon soft-dirty after remap merge 2nd pg
# ok 17 Test test_merge-anon soft-dirty after mprotect merge 1st pg
# ok 18 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
# # 1 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Planned tests != run tests (19 != 18)
# # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
# [FAIL]
not ok 52 soft-dirty # exit=1
With the fix (run test on thp disabled kernel):
./run_vmtests.sh -t soft_dirty
# --------------------
# running ./soft-dirty
# TAP version 13
# --------------------
# running ./soft-dirty
# --------------------
# TAP version 13
# 1..19
# ok 1 Test test_simple
# ok 2 Test test_vma_reuse dirty bit of allocated page
# ok 3 Test test_vma_reuse dirty bit of reused address page
# # Transparent Hugepages not available
# ok 4 # SKIP Test test_hugepage huge page allocation
# ok 5 # SKIP Test test_hugepage huge page dirty bit
# ok 6 Test test_mprotect-anon dirty bit of new written page
# ok 7 Test test_mprotect-anon soft-dirty clear after clear_refs
# ok 8 Test test_mprotect-anon soft-dirty clear after marking RO
# ok 9 Test test_mprotect-anon soft-dirty clear after marking RW
# ok 10 Test test_mprotect-anon soft-dirty after rewritten
# ok 11 Test test_mprotect-file dirty bit of new written page
# ok 12 Test test_mprotect-file soft-dirty clear after clear_refs
# ok 13 Test test_mprotect-file soft-dirty clear after marking RO
# ok 14 Test test_mprotect-file soft-dirty clear after marking RW
# ok 15 Test test_mprotect-file soft-dirty after rewritten
# ok 16 Test test_merge-anon soft-dirty after remap merge 1st pg
# ok 17 Test test_merge-anon soft-dirty after remap merge 2nd pg
# ok 18 Test test_merge-anon soft-dirty after mprotect merge 1st pg
# ok 19 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
# # 2 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:2 error:0
# [PASS]
ok 1 soft-dirty
hwpoison_inject
# SUMMARY: PASS=1 SKIP=0 FAIL=0
1..1
Link: https://lore.kernel.org/20260402014543.1671131-3-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
tools/testing/selftests/mm/soft-dirty.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/tools/testing/selftests/mm/soft-dirty.c~selftests-mm-soft-dirty-skip-two-tests-when-thp-is-not-available
+++ a/tools/testing/selftests/mm/soft-dirty.c
@@ -82,7 +82,9 @@ static void test_hugepage(int pagemap_fd
int i, ret;
if (!thp_is_enabled()) {
- ksft_test_result_skip("Transparent Hugepages not available\n");
+ ksft_print_msg("Transparent Hugepages not available\n");
+ ksft_test_result_skip("Test %s huge page allocation\n", __func__);
+ ksft_test_result_skip("Test %s huge page dirty bit\n", __func__);
return;
}
_
Patches currently in -mm which might be from chuhu@redhat.com are
reply other threads:[~2026-04-18 7:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260418075751.AF99AC19424@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=chuhu@redhat.com \
--cc=david@kernel.org \
--cc=liwang@redhat.com \
--cc=ljs@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=npache@redhat.com \
--cc=rppt@kernel.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.