From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: Jiri Kosina <jikos@kernel.org>, Benjamin Tissoires <bentiss@kernel.org>
Cc: "Pierre-Loup A . Griffais" <pgriffais@valvesoftware.com>,
Lambert Fan <fanzhaoming@anopc.com>,
Zhouwang Huang <honjow311@gmail.com>,
"Derek J . Clark" <derekjohn.clark@gmail.com>,
linux-input@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/5] HID: hid-oxp: Add Second Generation Gamepad Mode Switch
Date: Sat, 18 Apr 2026 21:26:22 -0700 [thread overview]
Message-ID: <20260419042624.625746-4-derekjohn.clark@gmail.com> (raw)
In-Reply-To: <20260419042624.625746-1-derekjohn.clark@gmail.com>
Adds "gamepad_mode" attribute to second generation OneXPlayer
configuration HID devices. This attribute initiates a mode shift in the
device MCU that puts it into a state where all events are routed to an
hidraw interface instead of the xpad evdev interface. This allows for
debugging the hardware input mapping added in the next patch.
Reviewed-by: Zhouwang Huang <honjow311@gmail.com>
Tested-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
v4:
- Add oxp_mcu_init delayed work struct to drvdata & properly init,
add cancel delayed work during remove.
v2:
- Rename to gamepad_mode & show relevant gamepad modes instead of
using a debug enable/disable paradigm, to match other drivers.
---
drivers/hid/hid-oxp.c | 131 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/drivers/hid/hid-oxp.c b/drivers/hid/hid-oxp.c
index 835de2118e3c..2504b56b8f8a 100644
--- a/drivers/hid/hid-oxp.c
+++ b/drivers/hid/hid-oxp.c
@@ -33,20 +33,33 @@
enum oxp_function_index {
OXP_FID_GEN1_RGB_SET = 0x07,
OXP_FID_GEN1_RGB_REPLY = 0x0f,
+ OXP_FID_GEN2_TOGGLE_MODE = 0xb2,
OXP_FID_GEN2_STATUS_EVENT = 0xb8,
};
static struct oxp_hid_cfg {
struct delayed_work oxp_rgb_queue;
+ struct delayed_work oxp_mcu_init;
struct led_classdev_mc *led_mc;
struct hid_device *hdev;
struct mutex cfg_mutex; /*ensure single synchronous output report*/
u8 rgb_brightness;
+ u8 gamepad_mode;
u8 rgb_effect;
u8 rgb_speed;
u8 rgb_en;
} drvdata;
+enum oxp_gamepad_mode_index {
+ OXP_GP_MODE_XINPUT = 0x00,
+ OXP_GP_MODE_DEBUG = 0x03,
+};
+
+static const char *const oxp_gamepad_mode_text[] = {
+ [OXP_GP_MODE_XINPUT] = "xinput",
+ [OXP_GP_MODE_DEBUG] = "debug",
+};
+
enum oxp_feature_en_index {
OXP_FEAT_DISABLED,
OXP_FEAT_ENABLED,
@@ -182,6 +195,30 @@ static int oxp_hid_raw_event_gen_1(struct hid_device *hdev,
return 0;
}
+static int oxp_gen_2_property_out(enum oxp_function_index fid, u8 *data, u8 data_size);
+
+static void oxp_mcu_init_fn(struct work_struct *work)
+{
+ u8 gp_mode_data[3] = { OXP_GP_MODE_DEBUG, 0x01, 0x02 };
+ int ret;
+
+ /* Cycle the gamepad mode */
+ ret = oxp_gen_2_property_out(OXP_FID_GEN2_TOGGLE_MODE, gp_mode_data, 3);
+ if (ret)
+ dev_err(&drvdata.hdev->dev,
+ "Error: Failed to set gamepad mode: %i\n", ret);
+
+ /* Remainder only applies for xinput mode */
+ if (drvdata.gamepad_mode == OXP_GP_MODE_DEBUG)
+ return;
+
+ gp_mode_data[0] = OXP_GP_MODE_XINPUT;
+ ret = oxp_gen_2_property_out(OXP_FID_GEN2_TOGGLE_MODE, gp_mode_data, 3);
+ if (ret)
+ dev_err(&drvdata.hdev->dev,
+ "Error: Failed to set gamepad mode: %i\n", ret);
+}
+
static int oxp_hid_raw_event_gen_2(struct hid_device *hdev,
struct hid_report *report, u8 *data,
int size)
@@ -192,6 +229,14 @@ static int oxp_hid_raw_event_gen_2(struct hid_device *hdev,
if (data[0] != OXP_FID_GEN2_STATUS_EVENT)
return 0;
+ /* Sent ~6s after resume event, indicating the MCU has fully reset.
+ * Re-apply our settings after this has been received.
+ */
+ if (data[3] == OXP_EFFECT_MONO_TRUE) {
+ mod_delayed_work(system_wq, &drvdata.oxp_mcu_init, msecs_to_jiffies(50));
+ return 0;
+ }
+
if (data[3] != OXP_GET_PROPERTY)
return 0;
@@ -289,6 +334,77 @@ static int oxp_gen_2_property_out(enum oxp_function_index fid, u8 *data,
footer_size);
}
+static ssize_t gamepad_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ u16 up = get_usage_page(drvdata.hdev);
+ u8 data[3] = { 0x00, 0x01, 0x02 };
+ int ret = -EINVAL;
+ int i;
+
+ if (up != GEN2_USAGE_PAGE)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(oxp_gamepad_mode_text); i++) {
+ if (oxp_gamepad_mode_text[i] && sysfs_streq(buf, oxp_gamepad_mode_text[i])) {
+ ret = i;
+ break;
+ }
+ }
+ if (ret < 0)
+ return ret;
+
+ data[0] = ret;
+
+ ret = oxp_gen_2_property_out(OXP_FID_GEN2_TOGGLE_MODE, data, 3);
+ if (ret)
+ return ret;
+
+ drvdata.gamepad_mode = data[0];
+
+ return count;
+}
+
+static ssize_t gamepad_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sysfs_emit(buf, "%s\n", oxp_gamepad_mode_text[drvdata.gamepad_mode]);
+}
+static DEVICE_ATTR_RW(gamepad_mode);
+
+static ssize_t gamepad_mode_index_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ssize_t count = 0;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(oxp_gamepad_mode_text); i++) {
+ if (!oxp_gamepad_mode_text[i] ||
+ oxp_gamepad_mode_text[i][0] == '\0')
+ continue;
+
+ count += sysfs_emit_at(buf, count, "%s ", oxp_gamepad_mode_text[i]);
+ }
+
+ if (count)
+ buf[count - 1] = '\n';
+
+ return count;
+}
+static DEVICE_ATTR_RO(gamepad_mode_index);
+
+static struct attribute *oxp_cfg_attrs[] = {
+ &dev_attr_gamepad_mode.attr,
+ &dev_attr_gamepad_mode_index.attr,
+ NULL,
+};
+
+static const struct attribute_group oxp_cfg_attrs_group = {
+ .attrs = oxp_cfg_attrs,
+};
+
static int oxp_rgb_status_store(u8 enabled, u8 speed, u8 brightness)
{
u16 up = get_usage_page(drvdata.hdev);
@@ -733,7 +849,21 @@ static int oxp_cfg_probe(struct hid_device *hdev, u16 up)
dev_warn(drvdata.led_mc->led_cdev.dev,
"Failed to query RGB initial state: %i\n", ret);
+ /* Below features are only implemented in gen 2 */
+ if (up != GEN2_USAGE_PAGE)
+ return 0;
+
skip_rgb:
+ drvdata.gamepad_mode = OXP_GP_MODE_XINPUT;
+
+ INIT_DELAYED_WORK(&drvdata.oxp_mcu_init, oxp_mcu_init_fn);
+ mod_delayed_work(system_wq, &drvdata.oxp_mcu_init, msecs_to_jiffies(50));
+
+ ret = devm_device_add_group(&hdev->dev, &oxp_cfg_attrs_group);
+ if (ret)
+ return dev_err_probe(&hdev->dev, ret,
+ "Failed to attach configuration attributes\n");
+
return 0;
}
@@ -778,6 +908,7 @@ static int oxp_hid_probe(struct hid_device *hdev,
static void oxp_hid_remove(struct hid_device *hdev)
{
cancel_delayed_work(&drvdata.oxp_rgb_queue);
+ cancel_delayed_work(&drvdata.oxp_mcu_init);
hid_hw_close(hdev);
hid_hw_stop(hdev);
}
--
2.53.0
next prev parent reply other threads:[~2026-04-19 4:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-19 4:26 [PATCH v4 0/5] Add OneXPlayer Configuration HID Driver Derek J. Clark
2026-04-19 4:26 ` [PATCH v4 1/5] HID: hid-oxp: Add OneXPlayer configuration driver Derek J. Clark
2026-04-19 4:26 ` [PATCH v4 2/5] HID: hid-oxp: Add Second Generation RGB Control Derek J. Clark
2026-04-19 4:26 ` Derek J. Clark [this message]
2026-04-19 4:26 ` [PATCH v4 4/5] HID: hid-oxp: Add Button Mapping Interface Derek J. Clark
2026-04-19 4:26 ` [PATCH v4 5/5] HID: hid-oxp: Add Vibration Intensity Attribute Derek J. Clark
2026-05-12 15:56 ` [PATCH v4 0/5] Add OneXPlayer Configuration HID Driver Jiri Kosina
2026-07-03 14:25 ` Günther Noack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260419042624.625746-4-derekjohn.clark@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=bentiss@kernel.org \
--cc=fanzhaoming@anopc.com \
--cc=honjow311@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pgriffais@valvesoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.