From: Dinh Nguyen <dinguyen@kernel.org>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: dinguyen@kernel.org, devicetree@vger.kernel.org
Subject: [PATCHv2 2/2] arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit
Date: Sun, 19 Apr 2026 18:24:16 -0500 [thread overview]
Message-ID: <20260419232416.68331-2-dinguyen@kernel.org> (raw)
In-Reply-To: <20260419232416.68331-1-dinguyen@kernel.org>
The Agilex7-M devkit contains an Agilex7M SoC, which is a newly branded
version of the original Agilex SoC. The Agilex7M core peripherals are
identical to the Agilex SoC.
We can re-use the socfpga_agilex.dtsi for this devkit. The Agilex7-M
devkit supports PCIE 5.0(x16), DDR4, DDR5, LPDDR5 and does not have QSPI.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: use the updated "altr,socfpga-agilex7m" and
"altr,socfpga-agilex7m-socdk"
---
arch/arm64/boot/dts/intel/Makefile | 1 +
.../boot/dts/intel/socfpga_agilex7m_socdk.dts | 104 ++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 33fcc55d0cb9..088a03b89c99 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
socfpga_agilex5_socdk_013b.dtb \
socfpga_agilex5_socdk_modular.dtb \
socfpga_agilex5_socdk_nand.dtb \
+ socfpga_agilex7m_socdk.dtb \
socfpga_n5x_socdk.dtb
dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
new file mode 100644
index 000000000000..952987cf3fd4
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2026 Altera Corporation
+
+#include "socfpga_agilex.dtsi"
+
+/ {
+ model = "Altera SoCFPGA Agilex7-M SoCDK";
+ compatible = "altr,socfpga-agilex7m-socdk",
+ "altr,socfpga-agilex7m";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "hps_led0";
+ gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ label = "hps_led1";
+ gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ label = "hps_led2";
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x80000000 0 0>;
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&mmc {
+ status = "okay";
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog0 {
+ status = "okay";
+};
--
2.42.0.411.g813d9a9188
next prev parent reply other threads:[~2026-04-19 23:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-19 23:24 [PATCHv2 1/2] dt-bindings: arm: altera: document the Agilex7-M devkit Dinh Nguyen
2026-04-19 23:24 ` Dinh Nguyen [this message]
2026-04-20 16:13 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260419232416.68331-2-dinguyen@kernel.org \
--to=dinguyen@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.