All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan@kernel.org>
Subject: [PATCH 3/4] spi: cadence: rename probe error labels
Date: Tue, 21 Apr 2026 14:36:14 +0200	[thread overview]
Message-ID: <20260421123615.1533617-4-johan@kernel.org> (raw)
In-Reply-To: <20260421123615.1533617-1-johan@kernel.org>

The "clk_dis_all" error label is not used to disable clocks since commit
f64b1600f92e ("spi: spi-cadence: Use helper function
devm_clk_get_enabled()").

Similarly, "remove_ctlr" drops a reference rather than deregisters the
controller.

Rename the labels after what they do.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/spi/spi-cadence.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 891e2ba36958..f27586151ca9 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -656,21 +656,21 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	xspi->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(xspi->regs)) {
 		ret = PTR_ERR(xspi->regs);
-		goto remove_ctlr;
+		goto err_put_ctlr;
 	}
 
 	xspi->pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
 	if (IS_ERR(xspi->pclk)) {
 		dev_err(&pdev->dev, "pclk clock not found.\n");
 		ret = PTR_ERR(xspi->pclk);
-		goto remove_ctlr;
+		goto err_put_ctlr;
 	}
 
 	xspi->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
 	if (IS_ERR(xspi->rstc)) {
 		ret = dev_err_probe(&pdev->dev, PTR_ERR(xspi->rstc),
 				    "Cannot get SPI reset.\n");
-		goto remove_ctlr;
+		goto err_put_ctlr;
 	}
 
 	reset_control_assert(xspi->rstc);
@@ -680,7 +680,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(xspi->ref_clk)) {
 		dev_err(&pdev->dev, "ref_clk clock not found.\n");
 		ret = PTR_ERR(xspi->ref_clk);
-		goto remove_ctlr;
+		goto err_put_ctlr;
 	}
 
 	if (!spi_controller_is_target(ctlr)) {
@@ -710,7 +710,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = irq;
-		goto clk_dis_all;
+		goto err_disable_rpm;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, cdns_spi_irq,
@@ -718,7 +718,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		ret = -ENXIO;
 		dev_err(&pdev->dev, "request_irq failed\n");
-		goto clk_dis_all;
+		goto err_disable_rpm;
 	}
 
 	ctlr->use_gpio_descriptors = true;
@@ -748,7 +748,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	ret = spi_register_controller(ctlr);
 	if (ret) {
 		dev_err(&pdev->dev, "spi_register_controller failed\n");
-		goto clk_dis_all;
+		goto err_disable_rpm;
 	}
 
 	if (!spi_controller_is_target(ctlr))
@@ -756,14 +756,14 @@ static int cdns_spi_probe(struct platform_device *pdev)
 
 	return ret;
 
-clk_dis_all:
+err_disable_rpm:
 	if (!spi_controller_is_target(ctlr)) {
 		pm_runtime_disable(&pdev->dev);
 		pm_runtime_set_suspended(&pdev->dev);
 		pm_runtime_put_noidle(&pdev->dev);
 		pm_runtime_dont_use_autosuspend(&pdev->dev);
 	}
-remove_ctlr:
+err_put_ctlr:
 	spi_controller_put(ctlr);
 	return ret;
 }
-- 
2.52.0


  parent reply	other threads:[~2026-04-21 12:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-21 12:36 [PATCH 0/4] spi: cadence: runtime PM fixes Johan Hovold
2026-04-21 12:36 ` [PATCH 1/4] spi: cadence: fix unclocked access on unbind Johan Hovold
2026-04-21 12:36 ` [PATCH 2/4] spi: cadence: fix clock imbalance on probe failure Johan Hovold
2026-04-21 12:36 ` Johan Hovold [this message]
2026-04-21 12:36 ` [PATCH 4/4] spi: cadence: clean up probe return value Johan Hovold
2026-04-26 23:25 ` [PATCH 0/4] spi: cadence: runtime PM fixes Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260421123615.1533617-4-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.