From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation
Date: Mon, 4 May 2026 14:33:51 +0300 [thread overview]
Message-ID: <20260504113352.38490-16-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260504113352.38490-1-adrian.hunter@intel.com>
dma_alloc_coherent() allocates memory in whole pages, which can waste
space when command and response queues are allocated separately.
Allocate the DMA command and response queues from a single coherent
allocation instead, while preserving the required 4-byte alignment.
This reduces memory overhead without changing behavior.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V3:
None
Changes in V2:
Check for failed allocation before assignments to avoid doing
arithmetic with NULL pointers
drivers/i3c/master/mipi-i3c-hci/dma.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index 6440302c63ca..4029d4d9e784 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -186,14 +186,12 @@ static void hci_dma_free(void *data)
for (int i = 0; i < rings->total; i++) {
rh = &rings->headers[i];
- if (rh->xfer)
- dma_free_coherent(rings->sysdev,
- rh->xfer_struct_sz * rh->xfer_entries,
- rh->xfer, rh->xfer_dma);
- if (rh->resp)
- dma_free_coherent(rings->sysdev,
- rh->resp_struct_sz * rh->xfer_entries,
- rh->resp, rh->resp_dma);
+ if (rh->xfer) {
+ size_t sz = round_up(rh->xfer_struct_sz * rh->xfer_entries, 4);
+
+ sz += rh->resp_struct_sz * rh->xfer_entries;
+ dma_free_coherent(rings->sysdev, sz, rh->xfer, rh->xfer_dma);
+ }
kfree(rh->src_xfers);
if (rh->ibi_status)
dma_free_coherent(rings->sysdev,
@@ -359,18 +357,18 @@ static int hci_dma_init(struct i3c_hci *hci)
dev_dbg(&hci->master.dev,
"xfer_struct_sz = %d, resp_struct_sz = %d",
rh->xfer_struct_sz, rh->resp_struct_sz);
- xfers_sz = rh->xfer_struct_sz * rh->xfer_entries;
+ xfers_sz = round_up(rh->xfer_struct_sz * rh->xfer_entries, 4);
resps_sz = rh->resp_struct_sz * rh->xfer_entries;
- rh->xfer = dma_alloc_coherent(rings->sysdev, xfers_sz,
+ rh->xfer = dma_alloc_coherent(rings->sysdev, xfers_sz + resps_sz,
&rh->xfer_dma, GFP_KERNEL);
- rh->resp = dma_alloc_coherent(rings->sysdev, resps_sz,
- &rh->resp_dma, GFP_KERNEL);
rh->src_xfers =
kzalloc_objs(*rh->src_xfers, rh->xfer_entries);
ret = -ENOMEM;
- if (!rh->xfer || !rh->resp || !rh->src_xfers)
+ if (!rh->xfer || !rh->src_xfers)
goto err_out;
+ rh->resp = rh->xfer + xfers_sz;
+ rh->resp_dma = rh->xfer_dma + xfers_sz;
/* IBIs */
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-05-04 11:34 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 11:33 [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 01/16] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 02/16] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error Adrian Hunter
2026-05-12 16:44 ` Frank Li
2026-05-12 16:44 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete Adrian Hunter
2026-05-12 16:45 ` Frank Li
2026-05-12 16:45 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 05/16] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 06/16] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error Adrian Hunter
2026-05-12 16:46 ` Frank Li
2026-05-12 16:46 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer Adrian Hunter
2026-05-12 16:50 ` Frank Li
2026-05-12 16:50 ` Frank Li
2026-05-15 5:30 ` Adrian Hunter
2026-05-15 5:30 ` Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers Adrian Hunter
2026-05-12 16:53 ` Frank Li
2026-05-12 16:53 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort " Adrian Hunter
2026-05-12 17:01 ` Frank Li
2026-05-12 17:01 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper Adrian Hunter
2026-05-12 17:03 ` Frank Li
2026-05-12 17:03 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 12/16] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete Adrian Hunter
2026-05-12 18:05 ` Frank Li
2026-05-12 18:05 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time Adrian Hunter
2026-05-12 18:11 ` Frank Li
2026-05-12 18:11 ` Frank Li
2026-05-04 11:33 ` Adrian Hunter [this message]
2026-05-12 18:15 ` [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation Frank Li
2026-05-12 18:15 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum Adrian Hunter
2026-05-12 18:15 ` Frank Li
2026-05-12 18:15 ` Frank Li
2026-05-12 12:35 ` [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
2026-05-12 12:35 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260504113352.38490-16-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.