From: phucduc.bui@gmail.com
To: peter.ujfalusi@gmail.com, broonie@kernel.org
Cc: lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
jarkko.nikula@bitmer.com, linux-sound@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 2/7] ASoC: ti: omap-dmic: Use guard() for mutex locks
Date: Fri, 8 May 2026 17:38:32 +0700 [thread overview]
Message-ID: <20260508103837.138142-3-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260508103837.138142-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Replace open-coded mutex_lock()/mutex_unlock() pairs with guard(mutex)()
and scoped_guard() helpers.
This also simplifies the control flow by removing temporary return
variables and unnecessary goto-based cleanup paths.
No functional change intended.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/ti/omap-dmic.c | 44 ++++++++++++++++------------------------
1 file changed, 18 insertions(+), 26 deletions(-)
diff --git a/sound/soc/ti/omap-dmic.c b/sound/soc/ti/omap-dmic.c
index fb92bb88eb5c..dc92fdb89a0f 100644
--- a/sound/soc/ti/omap-dmic.c
+++ b/sound/soc/ti/omap-dmic.c
@@ -91,18 +91,14 @@ static int omap_dmic_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
- int ret = 0;
-
- mutex_lock(&dmic->mutex);
- if (!snd_soc_dai_active(dai))
- dmic->active = 1;
- else
- ret = -EBUSY;
+ guard(mutex)(&dmic->mutex);
- mutex_unlock(&dmic->mutex);
+ if (snd_soc_dai_active(dai))
+ return -EBUSY;
- return ret;
+ dmic->active = 1;
+ return 0;
}
static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
@@ -110,14 +106,12 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
{
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
- mutex_lock(&dmic->mutex);
+ guard(mutex)(&dmic->mutex);
cpu_latency_qos_remove_request(&dmic->pm_qos_req);
if (!snd_soc_dai_active(dai))
dmic->active = 0;
-
- mutex_unlock(&dmic->mutex);
}
static int omap_dmic_select_divider(struct omap_dmic *dmic, int sample_rate)
@@ -334,26 +328,24 @@ static int omap_dmic_select_fclk(struct omap_dmic *dmic, int clk_id,
return -ENODEV;
}
- mutex_lock(&dmic->mutex);
- if (dmic->active) {
- /* disable clock while reparenting */
- pm_runtime_put_sync(dmic->dev);
- ret = clk_set_parent(mux, parent_clk);
- pm_runtime_get_sync(dmic->dev);
- } else {
- ret = clk_set_parent(mux, parent_clk);
+ scoped_guard(mutex, &dmic->mutex) {
+ if (dmic->active) {
+ /* disable clock while reparenting */
+ pm_runtime_put_sync(dmic->dev);
+ ret = clk_set_parent(mux, parent_clk);
+ pm_runtime_get_sync(dmic->dev);
+ } else {
+ ret = clk_set_parent(mux, parent_clk);
+ }
}
- mutex_unlock(&dmic->mutex);
if (ret < 0) {
dev_err(dmic->dev, "re-parent failed\n");
- goto err_busy;
+ } else {
+ dmic->sysclk = clk_id;
+ dmic->fclk_freq = freq;
}
- dmic->sysclk = clk_id;
- dmic->fclk_freq = freq;
-
-err_busy:
clk_put(mux);
clk_put(parent_clk);
--
2.43.0
next prev parent reply other threads:[~2026-05-08 10:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 10:38 [PATCH 0/7] ASoC: ti: Cleanup locking code using guard() helpers phucduc.bui
2026-05-08 10:38 ` [PATCH 1/7] ASoC: ti: j721e-evm: Use guard() for mutex locks phucduc.bui
2026-05-08 10:38 ` phucduc.bui [this message]
2026-05-08 10:38 ` [PATCH 3/7] ASoC: ti: omap-hdmi: " phucduc.bui
2026-05-08 10:38 ` [PATCH 4/7] ASoC: ti: omap-mcpdm: " phucduc.bui
2026-05-08 10:38 ` [PATCH 5/7] ASoC: ti: ams-delta: Use guard() for spin locks phucduc.bui
2026-05-08 10:38 ` [PATCH 6/7] ASoC: ti: omap-mcbsp-st: " phucduc.bui
2026-05-09 12:26 ` Jarkko Nikula
2026-05-08 10:38 ` [PATCH 7/7] ASoC: ti: omap-mcbsp: Simplify lock and resource handling phucduc.bui
2026-05-10 1:35 ` Mark Brown
2026-05-11 4:44 ` Bui Duc Phuc
2026-05-13 3:14 ` Bui Duc Phuc
2026-05-14 1:35 ` Mark Brown
2026-05-14 10:35 ` Bui Duc Phuc
2026-05-09 12:28 ` [PATCH 0/7] ASoC: ti: Cleanup locking code using guard() helpers Jarkko Nikula
2026-05-11 0:58 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260508103837.138142-3-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=broonie@kernel.org \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.