From: kernel test robot <lkp@intel.com>
To: oe-kbuild@lists.linux.dev
Cc: lkp@intel.com
Subject: arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: pinconf@8a21000 (pinconf-single): $nodename:0: 'pinconf@8a21000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+|-[a-z0-9]+)?$'
Date: Sun, 10 May 2026 00:08:25 +0200 [thread overview]
Message-ID: <202605100044.WpL5OPIY-lkp@intel.com> (raw)
::::::
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
TO: Frank Li <Frank.Li@nxp.com>
CC: 0day robot <lkp@intel.com>
CC: Linus Walleij <linusw@kernel.org>
CC: "Rob Herring (Arm)" <robh@kernel.org>
tree: https://github.com/intel-lab-lkp/linux/commits/Frank-Li/mux-add-devm_mux_state_get_from_np-to-get-mux-from-child-node/20260509-123711
head: 51b3a88d4505a0bd5c5a53452925a784aabec2ad
commit: ddfdae02177cc3cbb74e9571f21255d56a276057 dt-bindings: pinctrl: Add generic pinctrl for board-level mux chips
date: 17 hours ago
:::::: branch date: 17 hours ago
:::::: commit date: 17 hours ago
config: arm64-randconfig-2052-20260509 (https://download.01.org/0day-ci/archive/20260510/202605100044.WpL5OPIY-lkp@intel.com/config)
compiler: clang version 22.0.0git (https://github.com/llvm/llvm-project f43d6834093b19baf79beda8c0337ab020ac5f17)
dtschema: 2026.5.dev4+g4ccc1997d
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260510/202605100044.WpL5OPIY-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202605100044.WpL5OPIY-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/clock-reset-controller@8a22000: failed to match any schema with compatible: ['hisilicon,hi3798cv200-crg', 'syscon', 'simple-mfd']
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/clock-reset-controller@8a22000/reset-controller: failed to match any schema with compatible: ['ti,syscon-reset']
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/system-controller@8000000: failed to match any schema with compatible: ['hisilicon,hi3798cv200-sysctrl', 'syscon']
>> arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: pinconf@8a21000 (pinconf-single): $nodename:0: 'pinconf@8a21000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+|-[a-z0-9]+)?$'
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: spi@8b1a000 (arm,pl022): Unevaluated properties are not allowed ('label' was unexpected)
from schema $id: http://devicetree.org/schemas/spi/spi-pl022.yaml
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: gpio@8b29000 (arm,pl061): gpio-ranges:1: [11, 71, 1] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/ethernet@9840000: failed to match any schema with compatible: ['hisilicon,hi3798cv200-gmac', 'hisilicon,hisi-gmac-v2']
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/ethernet@9840000: failed to match any schema with compatible: ['hisilicon,hi3798cv200-gmac', 'hisilicon,hisi-gmac-v2']
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/ethernet@9841000: failed to match any schema with compatible: ['hisilicon,hi3798cv200-gmac', 'hisilicon,hisi-gmac-v2']
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/ethernet@9841000: failed to match any schema with compatible: ['hisilicon,hi3798cv200-gmac', 'hisilicon,hisi-gmac-v2']
arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dtb: /soc@f0000000/ir@8001000: failed to match any schema with compatible: ['hisilicon,hix5hd2-ir']
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-05-09 22:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202605100044.WpL5OPIY-lkp@intel.com \
--to=lkp@intel.com \
--cc=oe-kbuild@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.