FAILED: patch "[PATCH] PCI/ASPM: Fix pci_clear_and_set_config_dword() usage" failed to apply to 6.1-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x cc33985d26c92a5c908c0185239c59ec35b8637c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026051211-oak-chip-226b@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From cc33985d26c92a5c908c0185239c59ec35b8637c Mon Sep 17 00:00:00 2001
From: Lukas Wunner <lukas@wunner.de>
Date: Mon, 16 Feb 2026 08:46:13 +0100
Subject: [PATCH] PCI/ASPM: Fix pci_clear_and_set_config_dword() usage
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When aspm_calc_l12_info() programs the L1 PM Substates Control 1 register
fields Common_Mode_Restore_Time, LTR_L1.2_THRESHOLD_Value and _Scale, it
invokes pci_clear_and_set_config_dword() in an incorrect way:

For the bits to clear it selects those corresponding to the field.  So far
so good.  But for the bits to set it passes a full register value.
pci_clear_and_set_config_dword() performs a boolean OR operation which
sets all bits of that value, not just the ones that were just cleared.

Thus, when setting the LTR_L1.2_THRESHOLD_Value and _Scale on the child of
an ASPM link, aspm_calc_l12_info() also sets the Common_Mode_Restore_Time.
That's a spec violation:  PCIe r7.0 sec 7.8.3.3 says this field is RsvdP
for Upstream Ports.  On Adrià's Pixelbook Eve, Common_Mode_Restore_Time
of the Intel 7265 "Stone Peak" wifi card is zero, yet aspm_calc_l12_info()
does not preserve the zero bits but instead programs the value calculated
for the Root Port into the wifi card.

Likewise, when setting the Common_Mode_Restore_Time on the Root Port,
aspm_calc_l12_info() also changes the LTR_L1.2_THRESHOLD_Value and _Scale
from the initial 163840 nsec to 237568 nsec (due to ORing those fields),
only to reduce it afterwards to 106496 nsec.

Amend all invocations of pci_clear_and_set_config_dword() to only set bits
which are cleared.

Finally, when setting the T_POWER_ON_Value and _Scale on the Root Port and
the wifi card, aspm_calc_l12_info() fails to preserve bits declared RsvdP
and instead overwrites them with zeroes.  Replace pci_write_config_dword()
with pci_clear_and_set_config_dword() to avoid this.

Fixes: aeda9adebab8 ("PCI/ASPM: Configure L1 substate settings")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220705#c22
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Adrià Vilanova Martínez <me@avm99963.com>
Cc: stable@vger.kernel.org # v4.11+
Link: https://patch.msgid.link/5c1752d7512eed0f4ea57b84b12d7ee08ca61fc5.1771226659.git.lukas@wunner.de

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 21f5d23e0b61..925373b98dff 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -706,22 +706,29 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,
 	}
 
 	/* Program T_POWER_ON times in both ports */
-	pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2);
-	pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2);
+	pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2,
+				       PCI_L1SS_CTL2_T_PWR_ON_VALUE |
+				       PCI_L1SS_CTL2_T_PWR_ON_SCALE, ctl2);
+	pci_clear_and_set_config_dword(child, child->l1ss + PCI_L1SS_CTL2,
+				       PCI_L1SS_CTL2_T_PWR_ON_VALUE |
+				       PCI_L1SS_CTL2_T_PWR_ON_SCALE, ctl2);
 
 	/* Program Common_Mode_Restore_Time in upstream device */
 	pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
-				       PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1);
+				       PCI_L1SS_CTL1_CM_RESTORE_TIME,
+				       ctl1 & PCI_L1SS_CTL1_CM_RESTORE_TIME);
 
 	/* Program LTR_L1.2_THRESHOLD time in both ports */
 	pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
 				       PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
 				       PCI_L1SS_CTL1_LTR_L12_TH_SCALE,
-				       ctl1);
+				       ctl1 & (PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
+					       PCI_L1SS_CTL1_LTR_L12_TH_SCALE));
 	pci_clear_and_set_config_dword(child, child->l1ss + PCI_L1SS_CTL1,
 				       PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
 				       PCI_L1SS_CTL1_LTR_L12_TH_SCALE,
-				       ctl1);
+				       ctl1 & (PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
+					       PCI_L1SS_CTL1_LTR_L12_TH_SCALE));
 
 	if (pl1_2_enables || cl1_2_enables) {
 		pci_clear_and_set_config_dword(parent,