From: Lothar Rubusch <l.rubusch@gmail.com>
To: thorsten.blum@linux.dev, herbert@gondor.apana.org.au,
davem@davemloft.net, nicolas.ferre@microchip.com,
alexandre.belloni@bootlin.com, claudiu.beznea@tuxon.dev
Cc: linux-crypto@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, l.rubusch@gmail.com
Subject: [PATCH 02/12] crypto: atmel - move capability-based client allocation into i2c core
Date: Tue, 12 May 2026 22:43:39 +0000 [thread overview]
Message-ID: <20260512224349.64621-3-l.rubusch@gmail.com> (raw)
In-Reply-To: <20260512224349.64621-1-l.rubusch@gmail.com>
Move the i2c client allocation logic from atmel-ecc into the shared
atmel-i2c core and extend it to support capability-based client
selection.
Introduce enum atmel_i2c_capability and add capability flags to
struct atmel_i2c_client_priv. Devices now advertise their supported
features during probe, allowing atmel_i2c_client_alloc() to select a
compatible client from the shared i2c client list.
The allocation logic continues to balance crypto transformation usage
across devices by selecting the client with the lowest tfm_count, but
is no longer limited to ECC-capable devices.
This centralizes shared client management in the common atmel-i2c core
and prepares the infrastructure for additional shared crypto features
across compatible Atmel devices.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/crypto/atmel-ecc.c | 39 +++-------------------------------
drivers/crypto/atmel-i2c.c | 39 ++++++++++++++++++++++++++++++++++
drivers/crypto/atmel-i2c.h | 7 ++++++
drivers/crypto/atmel-sha204a.c | 2 ++
4 files changed, 51 insertions(+), 36 deletions(-)
diff --git a/drivers/crypto/atmel-ecc.c b/drivers/crypto/atmel-ecc.c
index cba4238735cc..c63d30947bd7 100644
--- a/drivers/crypto/atmel-ecc.c
+++ b/drivers/crypto/atmel-ecc.c
@@ -200,41 +200,6 @@ static int atmel_ecdh_compute_shared_secret(struct kpp_request *req)
return ret;
}
-static struct i2c_client *atmel_ecc_i2c_client_alloc(void)
-{
- struct atmel_i2c_client_priv *i2c_priv, *min_i2c_priv = NULL;
- struct i2c_client *client = ERR_PTR(-ENODEV);
- int min_tfm_cnt = INT_MAX;
- int tfm_cnt;
-
- spin_lock(&atmel_i2c_mgmt.i2c_list_lock);
-
- if (list_empty(&atmel_i2c_mgmt.i2c_client_list)) {
- spin_unlock(&atmel_i2c_mgmt.i2c_list_lock);
- return ERR_PTR(-ENODEV);
- }
-
- list_for_each_entry(i2c_priv, &atmel_i2c_mgmt.i2c_client_list,
- i2c_client_list_node) {
- tfm_cnt = atomic_read(&i2c_priv->tfm_count);
- if (tfm_cnt < min_tfm_cnt) {
- min_tfm_cnt = tfm_cnt;
- min_i2c_priv = i2c_priv;
- }
- if (!min_tfm_cnt)
- break;
- }
-
- if (min_i2c_priv) {
- atomic_inc(&min_i2c_priv->tfm_count);
- client = min_i2c_priv->client;
- }
-
- spin_unlock(&atmel_i2c_mgmt.i2c_list_lock);
-
- return client;
-}
-
static void atmel_ecc_i2c_client_free(struct i2c_client *client)
{
struct atmel_i2c_client_priv *i2c_priv = i2c_get_clientdata(client);
@@ -249,7 +214,7 @@ static int atmel_ecdh_init_tfm(struct crypto_kpp *tfm)
struct atmel_ecdh_ctx *ctx = kpp_tfm_ctx(tfm);
ctx->curve_id = ECC_CURVE_NIST_P256;
- ctx->client = atmel_ecc_i2c_client_alloc();
+ ctx->client = atmel_i2c_client_alloc(ATMEL_CAP_ECDH);
if (IS_ERR(ctx->client)) {
pr_err("tfm - i2c_client binding failed\n");
return PTR_ERR(ctx->client);
@@ -321,6 +286,8 @@ static int atmel_ecc_probe(struct i2c_client *client)
i2c_priv = i2c_get_clientdata(client);
+ i2c_priv->caps = BIT(ATMEL_CAP_ECDH);
+
/* add to client list */
spin_lock(&atmel_i2c_mgmt.i2c_list_lock);
list_add_tail(&i2c_priv->i2c_client_list_node,
diff --git a/drivers/crypto/atmel-i2c.c b/drivers/crypto/atmel-i2c.c
index 861af52d7a88..b7ee2ec37531 100644
--- a/drivers/crypto/atmel-i2c.c
+++ b/drivers/crypto/atmel-i2c.c
@@ -57,6 +57,45 @@ static void atmel_i2c_checksum(struct atmel_i2c_cmd *cmd)
*__crc16 = cpu_to_le16(bitrev16(crc16(0, data, len)));
}
+struct i2c_client *atmel_i2c_client_alloc(enum atmel_i2c_capability cap)
+{
+ struct atmel_i2c_client_priv *i2c_priv, *min_i2c_priv = NULL;
+ struct i2c_client *client = ERR_PTR(-ENODEV);
+ int min_tfm_cnt = INT_MAX;
+ int tfm_cnt;
+
+ spin_lock(&atmel_i2c_mgmt.i2c_list_lock);
+
+ if (list_empty(&atmel_i2c_mgmt.i2c_client_list)) {
+ spin_unlock(&atmel_i2c_mgmt.i2c_list_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
+ list_for_each_entry(i2c_priv, &atmel_i2c_mgmt.i2c_client_list,
+ i2c_client_list_node) {
+ if (!(i2c_priv->caps & BIT(cap)))
+ continue;
+
+ tfm_cnt = atomic_read(&i2c_priv->tfm_count);
+ if (tfm_cnt < min_tfm_cnt) {
+ min_tfm_cnt = tfm_cnt;
+ min_i2c_priv = i2c_priv;
+ }
+ if (!min_tfm_cnt)
+ break;
+ }
+
+ if (min_i2c_priv) {
+ atomic_inc(&min_i2c_priv->tfm_count);
+ client = min_i2c_priv->client;
+ }
+
+ spin_unlock(&atmel_i2c_mgmt.i2c_list_lock);
+
+ return client;
+}
+EXPORT_SYMBOL(atmel_i2c_client_alloc);
+
void atmel_i2c_init_read_config_cmd(struct atmel_i2c_cmd *cmd)
{
cmd->word_addr = COMMAND;
diff --git a/drivers/crypto/atmel-i2c.h b/drivers/crypto/atmel-i2c.h
index 43a0c1cfcd94..70579b438256 100644
--- a/drivers/crypto/atmel-i2c.h
+++ b/drivers/crypto/atmel-i2c.h
@@ -115,6 +115,10 @@ struct atmel_i2c_cmd {
#define ECDH_PREFIX_MODE 0x00
/* Used for binding tfm objects to i2c clients. */
+enum atmel_i2c_capability {
+ ATMEL_CAP_ECDH = 0,
+};
+
struct atmel_i2c_client_mgmt {
struct list_head i2c_client_list;
spinlock_t i2c_list_lock;
@@ -130,6 +134,7 @@ extern struct atmel_i2c_client_mgmt atmel_i2c_mgmt;
* @wake_token_sz : size in bytes of the wake_token
* @tfm_count : number of active crypto transformations on i2c client
* @hwrng : hold the hardware generated rng
+ * @caps : feature capability of the particular driver
*
* Reads and writes from/to the i2c client are sequential. The first byte
* transmitted to the device is treated as the byte size. Any attempt to send
@@ -146,6 +151,7 @@ struct atmel_i2c_client_priv {
size_t wake_token_sz;
atomic_t tfm_count ____cacheline_aligned;
struct hwrng hwrng;
+ u32 caps;
};
/**
@@ -190,6 +196,7 @@ void atmel_i2c_init_genkey_cmd(struct atmel_i2c_cmd *cmd, u16 keyid);
int atmel_i2c_init_ecdh_cmd(struct atmel_i2c_cmd *cmd,
struct scatterlist *pubkey);
+struct i2c_client *atmel_i2c_client_alloc(enum atmel_i2c_capability cap);
void atmel_i2c_unregister_client(struct atmel_i2c_client_priv *i2c_priv);
#endif /* __ATMEL_I2C_H__ */
diff --git a/drivers/crypto/atmel-sha204a.c b/drivers/crypto/atmel-sha204a.c
index e6808c2bc891..ab758c9cd410 100644
--- a/drivers/crypto/atmel-sha204a.c
+++ b/drivers/crypto/atmel-sha204a.c
@@ -173,6 +173,8 @@ static int atmel_sha204a_probe(struct i2c_client *client)
i2c_priv = i2c_get_clientdata(client);
+ i2c_priv->caps = 0;
+
/* add to client list */
spin_lock(&atmel_i2c_mgmt.i2c_list_lock);
list_add_tail(&i2c_priv->i2c_client_list_node,
--
2.53.0
next prev parent reply other threads:[~2026-05-12 22:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-12 22:43 [PATCH 00/12] crypto: atmel - refactor common i2c support and add SHA256 ahash support Lothar Rubusch
2026-05-12 22:43 ` [PATCH 01/12] crypto: atmel - introduce shared I2C client management Lothar Rubusch
2026-05-12 22:43 ` Lothar Rubusch [this message]
2026-05-12 22:43 ` [PATCH 03/12] crypto: atmel - remove obsolete CONFIG_OF guard Lothar Rubusch
2026-05-12 22:43 ` [PATCH 04/12] crypto: atmel - add per-device timing and match-data driven configuration Lothar Rubusch
2026-05-12 22:43 ` [PATCH 05/12] crypto: atmel - move RNG support into common i2c core Lothar Rubusch
2026-05-12 22:43 ` [PATCH 06/12] crypto: atmel - move EEPROM access " Lothar Rubusch
2026-05-12 22:43 ` [PATCH 07/12] crypto: atmel - expose CONFIG zone through sysfs Lothar Rubusch
2026-05-12 22:43 ` [PATCH 08/12] crypto: atmel - move device sanity check to core driver Lothar Rubusch
2026-05-12 22:43 ` [PATCH 09/12] crypto: atmel - check client data in remove callbacks Lothar Rubusch
2026-05-12 22:43 ` [PATCH 10/12] crypto: atmel - update workqueue flags and add flush on exit Lothar Rubusch
2026-05-12 22:43 ` [PATCH 11/12] crypto: atmel - refactor and localize driver constants Lothar Rubusch
2026-05-12 22:43 ` [PATCH 12/12] crypto: atmel - add SHA256 ahash support Lothar Rubusch
2026-05-14 19:51 ` [PATCH 00/12] crypto: atmel - refactor common i2c support and " Thorsten Blum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260512224349.64621-3-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=thorsten.blum@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.