From: "Darrick J. Wong" <djwong@kernel.org>
To: miklos@szeredi.hu
Cc: joannelkoong@gmail.com, neal@gompa.dev,
linux-fsdevel@vger.kernel.org, bernd@bsbernd.com,
fuse-devel@lists.linux.dev
Subject: Re: [PATCH 01/33] fuse: implement the basic iomap mechanisms
Date: Wed, 13 May 2026 10:38:23 -0700 [thread overview]
Message-ID: <20260513173823.GF9544@frogsfrogsfrogs> (raw)
In-Reply-To: <177747205172.4101881.17272133725064169927.stgit@frogsfrogsfrogs>
On Wed, Apr 29, 2026 at 07:23:57AM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Implement functions to enable upcalling of iomap_begin and iomap_end to
> userspace fuse servers.
>
> Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
> ---
> fs/fuse/fuse_i.h | 5 -
> fs/fuse/fuse_iomap.h | 26 +++
> fs/fuse/fuse_iomap_i.h | 28 +++
> include/uapi/linux/fuse.h | 91 +++++++++-
> fs/fuse/Kconfig | 32 +++
> fs/fuse/Makefile | 1
> fs/fuse/fuse_iomap.c | 430 +++++++++++++++++++++++++++++++++++++++++++++
> fs/fuse/inode.c | 9 +
> 8 files changed, 620 insertions(+), 2 deletions(-)
> create mode 100644 fs/fuse/fuse_iomap.h
> create mode 100644 fs/fuse/fuse_iomap_i.h
> create mode 100644 fs/fuse/fuse_iomap.c
>
>
> diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
> index 0666e03723071b..7accde465d03a7 100644
> --- a/fs/fuse/fuse_i.h
> +++ b/fs/fuse/fuse_i.h
> @@ -937,6 +937,9 @@ struct fuse_conn {
> /* Is synchronous FUSE_INIT allowed? */
> unsigned int sync_init:1;
>
> + /* Enable fs/iomap for file operations */
> + unsigned int iomap:1;
> +
> /* Use io_uring for communication */
> unsigned int io_uring;
>
> @@ -1058,7 +1061,7 @@ static inline struct fuse_conn *get_fuse_conn_super(struct super_block *sb)
> return get_fuse_mount_super(sb)->fc;
> }
>
> -static inline struct fuse_mount *get_fuse_mount(struct inode *inode)
> +static inline struct fuse_mount *get_fuse_mount(const struct inode *inode)
> {
> return get_fuse_mount_super(inode->i_sb);
> }
> diff --git a/fs/fuse/fuse_iomap.h b/fs/fuse/fuse_iomap.h
> new file mode 100644
> index 00000000000000..6c71318365ca82
> --- /dev/null
> +++ b/fs/fuse/fuse_iomap.h
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2025-2026 Oracle. All Rights Reserved.
> + * Author: Darrick J. Wong <djwong@kernel.org>
> + */
> +#ifndef _FS_FUSE_IOMAP_H
> +#define _FS_FUSE_IOMAP_H
> +
> +#if IS_ENABLED(CONFIG_FUSE_IOMAP)
> +enum fuse_iomap_iodir {
> + READ_MAPPING,
> + WRITE_MAPPING,
> +};
> +
> +bool fuse_iomap_enabled(void);
> +
> +static inline bool fuse_has_iomap(const struct inode *inode)
> +{
> + return get_fuse_conn(inode)->iomap;
> +}
> +#else
> +# define fuse_iomap_enabled(...) (false)
> +# define fuse_has_iomap(...) (false)
> +#endif /* CONFIG_FUSE_IOMAP */
> +
> +#endif /* _FS_FUSE_IOMAP_H */
> diff --git a/fs/fuse/fuse_iomap_i.h b/fs/fuse/fuse_iomap_i.h
> new file mode 100644
> index 00000000000000..2897049637fad2
> --- /dev/null
> +++ b/fs/fuse/fuse_iomap_i.h
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2025-2026 Oracle. All Rights Reserved.
> + * Author: Darrick J. Wong <djwong@kernel.org>
> + */
> +#ifndef _FS_FUSE_IOMAP_I_H
> +#define _FS_FUSE_IOMAP_I_H
> +
> +#if IS_ENABLED(CONFIG_FUSE_IOMAP)
> +#if IS_ENABLED(CONFIG_FUSE_IOMAP_DEBUG)
> +# define ASSERT(condition) do { \
> + int __cond = !!(condition); \
> + WARN(!__cond, "Assertion failed: %s, func: %s, line: %d", #condition, __func__, __LINE__); \
> +} while (0)
> +# define BAD_DATA(condition) ({ \
> + int __cond = !!(condition); \
> + WARN(__cond, "Bad mapping: %s, func: %s, line: %d", #condition, __func__, __LINE__); \
> +})
> +#else
> +# define ASSERT(condition)
> +# define BAD_DATA(condition) ({ \
> + int __cond = !!(condition); \
> + unlikely(__cond); \
> +})
> +#endif /* CONFIG_FUSE_IOMAP_DEBUG */
> +#endif /* CONFIG_FUSE_IOMAP */
> +
> +#endif /* _FS_FUSE_IOMAP_I_H */
> diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
> index 18713cfaf09171..5a58011f66f501 100644
> --- a/include/uapi/linux/fuse.h
> +++ b/include/uapi/linux/fuse.h
> @@ -240,6 +240,10 @@
> * - add FUSE_COPY_FILE_RANGE_64
> * - add struct fuse_copy_file_range_out
> * - add FUSE_NOTIFY_PRUNE
> + *
> + * 7.99
> + * - XXX magic minor revision to make experimental code really obvious
> + * - add FUSE_IOMAP and iomap_{begin,end,ioend} for regular file operations
> */
>
> #ifndef _LINUX_FUSE_H
> @@ -275,7 +279,7 @@
> #define FUSE_KERNEL_VERSION 7
>
> /** Minor version number of this interface */
> -#define FUSE_KERNEL_MINOR_VERSION 45
> +#define FUSE_KERNEL_MINOR_VERSION 99
>
> /** The node ID of the root inode */
> #define FUSE_ROOT_ID 1
> @@ -448,6 +452,7 @@ struct fuse_file_lock {
> * FUSE_OVER_IO_URING: Indicate that client supports io-uring
> * FUSE_REQUEST_TIMEOUT: kernel supports timing out requests.
> * init_out.request_timeout contains the timeout (in secs)
> + * FUSE_IOMAP: Client supports iomap for regular file operations.
> */
> #define FUSE_ASYNC_READ (1 << 0)
> #define FUSE_POSIX_LOCKS (1 << 1)
> @@ -495,6 +500,7 @@ struct fuse_file_lock {
> #define FUSE_ALLOW_IDMAP (1ULL << 40)
> #define FUSE_OVER_IO_URING (1ULL << 41)
> #define FUSE_REQUEST_TIMEOUT (1ULL << 42)
> +#define FUSE_IOMAP (1ULL << 43)
>
> /**
> * CUSE INIT request/reply flags
> @@ -664,6 +670,9 @@ enum fuse_opcode {
> FUSE_STATX = 52,
> FUSE_COPY_FILE_RANGE_64 = 53,
>
> + FUSE_IOMAP_BEGIN = 4094,
> + FUSE_IOMAP_END = 4095,
> +
> /* CUSE specific operations */
> CUSE_INIT = 4096,
>
> @@ -1314,4 +1323,84 @@ struct fuse_uring_cmd_req {
> uint8_t padding[6];
> };
>
> +/* mapping types; see corresponding IOMAP_TYPE_ */
> +#define FUSE_IOMAP_TYPE_HOLE (0)
> +#define FUSE_IOMAP_TYPE_DELALLOC (1)
> +#define FUSE_IOMAP_TYPE_MAPPED (2)
> +#define FUSE_IOMAP_TYPE_UNWRITTEN (3)
> +#define FUSE_IOMAP_TYPE_INLINE (4)
> +
> +/* fuse-specific mapping type indicating that writes use the read mapping */
> +#define FUSE_IOMAP_TYPE_PURE_OVERWRITE (255)
> +
> +#define FUSE_IOMAP_DEV_NULL (0U) /* null device cookie */
> +
> +/* mapping flags passed back from iomap_begin; see corresponding IOMAP_F_ */
> +#define FUSE_IOMAP_F_NEW (1U << 0)
> +#define FUSE_IOMAP_F_DIRTY (1U << 1)
> +#define FUSE_IOMAP_F_SHARED (1U << 2)
> +#define FUSE_IOMAP_F_MERGED (1U << 3)
> +#define FUSE_IOMAP_F_BOUNDARY (1U << 4)
> +#define FUSE_IOMAP_F_ANON_WRITE (1U << 5)
> +#define FUSE_IOMAP_F_ATOMIC_BIO (1U << 6)
> +
> +/* fuse-specific mapping flag asking for ->iomap_end call */
> +#define FUSE_IOMAP_F_WANT_IOMAP_END (1U << 7)
> +
> +/* mapping flags passed to iomap_end */
> +#define FUSE_IOMAP_F_SIZE_CHANGED (1U << 8)
> +#define FUSE_IOMAP_F_STALE (1U << 9)
> +
> +/* operation flags from iomap; see corresponding IOMAP_* */
> +#define FUSE_IOMAP_OP_WRITE (1U << 0)
> +#define FUSE_IOMAP_OP_ZERO (1U << 1)
> +#define FUSE_IOMAP_OP_REPORT (1U << 2)
> +#define FUSE_IOMAP_OP_FAULT (1U << 3)
> +#define FUSE_IOMAP_OP_DIRECT (1U << 4)
> +#define FUSE_IOMAP_OP_NOWAIT (1U << 5)
> +#define FUSE_IOMAP_OP_OVERWRITE_ONLY (1U << 6)
> +#define FUSE_IOMAP_OP_UNSHARE (1U << 7)
> +#define FUSE_IOMAP_OP_DAX (1U << 8)
> +#define FUSE_IOMAP_OP_ATOMIC (1U << 9)
> +#define FUSE_IOMAP_OP_DONTCACHE (1U << 10)
> +
> +#define FUSE_IOMAP_NULL_ADDR (-1ULL) /* addr is not valid */
> +
> +struct fuse_iomap_io {
> + uint64_t offset; /* file offset of mapping, bytes */
> + uint64_t length; /* length of mapping, bytes */
> + uint64_t addr; /* disk offset of mapping, bytes */
> + uint16_t type; /* FUSE_IOMAP_TYPE_* */
> + uint16_t flags; /* FUSE_IOMAP_F_* */
> + uint32_t dev; /* device cookie */
> +};
> +
> +struct fuse_iomap_begin_in {
> + uint32_t opflags; /* FUSE_IOMAP_OP_* */
> + uint32_t reserved; /* zero */
> + uint64_t attr_ino; /* matches fuse_attr:ino */
> + uint64_t pos; /* file position, in bytes */
> + uint64_t count; /* operation length, in bytes */
> +};
> +
> +struct fuse_iomap_begin_out {
> + /* read file data from here */
> + struct fuse_iomap_io read;
> +
> + /* write file data to here, if applicable */
> + struct fuse_iomap_io write;
It occurs to me that these comments are misleading -- for a write
operation, the fuse server needs to supply both a read and a write
mapping because iomap could decide to do a RMW operation (large folios,
sub-fsblock directio write).
For a read, the write mapping isn't going to be used, but the validation
code requires that the fuse server supply *something*, even if it's
FUSE_IOMAP_TYPE_PURE_OVERWRITE.
I will clarify this:
struct fuse_iomap_begin_out {
/*
* Read file data from here. This must be set even for a write
* operation due to the possibility of a read-modify-write.
*/
struct fuse_iomap_io read;
/*
* Write file data to here. This must be set even for a read
* operation. If writes are not allowed, reply to the
* FUSE_IOMAP_BEGIN command with EIO or EROFS.
*/
struct fuse_iomap_io write;
};
> +};
> +
> +struct fuse_iomap_end_in {
> + uint32_t opflags; /* FUSE_IOMAP_OP_* */
> + uint32_t reserved; /* zero */
> + uint64_t attr_ino; /* matches fuse_attr:ino */
> + uint64_t pos; /* file position, in bytes */
> + uint64_t count; /* operation length, in bytes */
> + int64_t written; /* bytes processed */
> +
> + /* mapping that the kernel acted upon */
> + struct fuse_iomap_io map;
> +};
> +
> #endif /* _LINUX_FUSE_H */
> diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
> index 290d1c09e0b924..934d48076a010c 100644
> --- a/fs/fuse/Kconfig
> +++ b/fs/fuse/Kconfig
> @@ -69,6 +69,38 @@ config FUSE_PASSTHROUGH
> config FUSE_BACKING
> bool
>
> +config FUSE_IOMAP
> + bool "FUSE file IO over iomap"
> + default y
> + depends on FUSE_FS
> + depends on BLOCK
> + select FS_IOMAP
> + help
> + Enable fuse servers to operate the regular file I/O path through
> + the fs-iomap library in the kernel. This enables higher performance
> + userspace filesystems by keeping the performance critical parts in
> + the kernel while delegating the difficult metadata parsing parts to
> + an easily-contained userspace program.
> +
> + This feature is considered EXPERIMENTAL. Use with caution!
> +
> + If unsure, say N.
> +
> +config FUSE_IOMAP_BY_DEFAULT
> + bool "FUSE file I/O over iomap by default"
> + default n
> + depends on FUSE_IOMAP
> + help
> + Enable sending FUSE file I/O over iomap by default.
> +
> +config FUSE_IOMAP_DEBUG
> + bool "Debug FUSE file IO over iomap"
> + default y
> + depends on FUSE_IOMAP
> + help
> + Enable debugging assertions for the fuse iomap code paths and logging
> + of bad iomap file mapping data being sent to the kernel.
> +
> config FUSE_IO_URING
> bool "FUSE communication over io-uring"
> default y
> diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
> index 46041228e5be2c..2536bc6a71b898 100644
> --- a/fs/fuse/Makefile
> +++ b/fs/fuse/Makefile
> @@ -18,5 +18,6 @@ fuse-$(CONFIG_FUSE_PASSTHROUGH) += passthrough.o
> fuse-$(CONFIG_FUSE_BACKING) += backing.o
> fuse-$(CONFIG_SYSCTL) += sysctl.o
> fuse-$(CONFIG_FUSE_IO_URING) += dev_uring.o
> +fuse-$(CONFIG_FUSE_IOMAP) += fuse_iomap.o
>
> virtiofs-y := virtio_fs.o
> diff --git a/fs/fuse/fuse_iomap.c b/fs/fuse/fuse_iomap.c
> new file mode 100644
> index 00000000000000..8785f86941a1d2
> --- /dev/null
> +++ b/fs/fuse/fuse_iomap.c
> @@ -0,0 +1,430 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2025-2026 Oracle. All Rights Reserved.
> + * Author: Darrick J. Wong <djwong@kernel.org>
> + */
> +#include <linux/iomap.h>
> +#include "fuse_i.h"
> +#include "fuse_trace.h"
> +#include "fuse_iomap.h"
> +#include "fuse_iomap_i.h"
> +
> +static bool __read_mostly enable_iomap =
> +#if IS_ENABLED(CONFIG_FUSE_IOMAP_BY_DEFAULT)
> + true;
> +#else
> + false;
> +#endif
> +module_param(enable_iomap, bool, 0644);
> +MODULE_PARM_DESC(enable_iomap, "Enable file I/O through iomap");
> +
> +bool fuse_iomap_enabled(void)
> +{
> + /* Don't let anyone touch iomap until the end of the patchset. */
> + return false;
> +
> + /*
> + * There are fears that a fuse+iomap server could somehow DoS the
> + * system by doing things like going out to lunch during a writeback
> + * related iomap request. Only allow iomap access if the fuse server
> + * has rawio capabilities since those processes can mess things up
> + * quite well even without our help.
> + */
> + return enable_iomap && has_capability_noaudit(current, CAP_SYS_RAWIO);
> +}
> +
> +/* Convert IOMAP_* mapping types to FUSE_IOMAP_TYPE_* */
> +#define XMAP(word) \
> + case IOMAP_##word: \
> + return FUSE_IOMAP_TYPE_##word
> +static inline uint16_t fuse_iomap_type_to_server(uint16_t iomap_type)
> +{
> + switch (iomap_type) {
> + XMAP(HOLE);
> + XMAP(DELALLOC);
> + XMAP(MAPPED);
> + XMAP(UNWRITTEN);
> + XMAP(INLINE);
> + default:
> + ASSERT(0);
> + }
> + return 0;
> +}
> +#undef XMAP
> +
> +/* Convert FUSE_IOMAP_TYPE_* to IOMAP_* mapping types */
> +#define XMAP(word) \
> + case FUSE_IOMAP_TYPE_##word: \
> + return IOMAP_##word
> +static inline uint16_t fuse_iomap_type_from_server(uint16_t fuse_type)
> +{
> + switch (fuse_type) {
> + XMAP(HOLE);
> + XMAP(DELALLOC);
> + XMAP(MAPPED);
> + XMAP(UNWRITTEN);
> + XMAP(INLINE);
> + default:
> + ASSERT(0);
> + }
> + return 0;
> +}
> +#undef XMAP
> +
> +/* Validate FUSE_IOMAP_TYPE_* */
> +static inline bool fuse_iomap_check_type(uint16_t fuse_type)
> +{
> + switch (fuse_type) {
> + case FUSE_IOMAP_TYPE_HOLE:
> + case FUSE_IOMAP_TYPE_DELALLOC:
> + case FUSE_IOMAP_TYPE_MAPPED:
> + case FUSE_IOMAP_TYPE_UNWRITTEN:
> + case FUSE_IOMAP_TYPE_INLINE:
> + case FUSE_IOMAP_TYPE_PURE_OVERWRITE:
> + return true;
> + }
> +
> + return false;
> +}
> +
> +#define FUSE_IOMAP_F_ALL (FUSE_IOMAP_F_NEW | \
> + FUSE_IOMAP_F_DIRTY | \
> + FUSE_IOMAP_F_SHARED | \
> + FUSE_IOMAP_F_MERGED | \
> + FUSE_IOMAP_F_BOUNDARY | \
> + FUSE_IOMAP_F_ANON_WRITE | \
> + FUSE_IOMAP_F_ATOMIC_BIO | \
> + FUSE_IOMAP_F_WANT_IOMAP_END)
> +
> +static inline bool fuse_iomap_check_flags(uint16_t flags)
> +{
> + return (flags & ~FUSE_IOMAP_F_ALL) == 0;
> +}
> +
> +/* Convert IOMAP_F_* mapping state flags to FUSE_IOMAP_F_* */
> +#define XMAP(word) \
> + if (iomap_f_flags & IOMAP_F_##word) \
> + ret |= FUSE_IOMAP_F_##word
> +#define XMAP2(iword, oword) \
> + if (iomap_f_flags & IOMAP_F_##iword) \
> + ret |= FUSE_IOMAP_F_##oword
> +static inline uint16_t fuse_iomap_flags_to_server(uint16_t iomap_f_flags)
> +{
> + uint16_t ret = 0;
> +
> + XMAP(NEW);
> + XMAP(DIRTY);
> + XMAP(SHARED);
> + XMAP(MERGED);
> + XMAP(BOUNDARY);
> + XMAP(ANON_WRITE);
> + XMAP(ATOMIC_BIO);
> + XMAP2(PRIVATE, WANT_IOMAP_END);
> +
> + XMAP(SIZE_CHANGED);
> + XMAP(STALE);
> +
> + return ret;
> +}
> +#undef XMAP2
> +#undef XMAP
> +
> +/* Convert FUSE_IOMAP_F_* to IOMAP_F_* mapping state flags */
> +#define XMAP(word) \
> + if (fuse_f_flags & FUSE_IOMAP_F_##word) \
> + ret |= IOMAP_F_##word
> +#define XMAP2(iword, oword) \
> + if (fuse_f_flags & FUSE_IOMAP_F_##iword) \
> + ret |= IOMAP_F_##oword
> +static inline uint16_t fuse_iomap_flags_from_server(uint16_t fuse_f_flags)
> +{
> + uint16_t ret = 0;
> +
> + XMAP(NEW);
> + XMAP(DIRTY);
> + XMAP(SHARED);
> + XMAP(MERGED);
> + XMAP(BOUNDARY);
> + XMAP(ANON_WRITE);
> + XMAP(ATOMIC_BIO);
> + XMAP2(WANT_IOMAP_END, PRIVATE);
> +
> + return ret;
> +}
> +#undef XMAP2
> +#undef XMAP
> +
> +/* Convert IOMAP_* operation flags to FUSE_IOMAP_OP_* */
> +#define XMAP(word) \
> + if (iomap_op_flags & IOMAP_##word) \
> + ret |= FUSE_IOMAP_OP_##word
> +static inline uint32_t fuse_iomap_op_to_server(unsigned iomap_op_flags)
> +{
> + uint32_t ret = 0;
> +
> + XMAP(WRITE);
> + XMAP(ZERO);
> + XMAP(REPORT);
> + XMAP(FAULT);
> + XMAP(DIRECT);
> + XMAP(NOWAIT);
> + XMAP(OVERWRITE_ONLY);
> + XMAP(UNSHARE);
> + XMAP(DAX);
> + XMAP(ATOMIC);
> + XMAP(DONTCACHE);
> +
> + return ret;
> +}
> +#undef XMAP
> +
> +/* Validate an iomap mapping. */
> +static inline bool fuse_iomap_check_mapping(const struct inode *inode,
> + const struct fuse_iomap_io *map,
> + enum fuse_iomap_iodir iodir)
> +{
> + const unsigned int blocksize = i_blocksize(inode);
> + uint64_t end;
> +
> + /* Type and flags must be known */
> + if (BAD_DATA(!fuse_iomap_check_type(map->type)))
> + return false;
> + if (BAD_DATA(!fuse_iomap_check_flags(map->flags)))
> + return false;
> +
> + /* No zero-length mappings */
> + if (BAD_DATA(map->length == 0))
> + return false;
> +
> + /* File range must be aligned to blocksize */
> + if (BAD_DATA(!IS_ALIGNED(map->offset, blocksize)))
> + return false;
> + if (BAD_DATA(!IS_ALIGNED(map->length, blocksize)))
> + return false;
> +
> + /* No overflows in the file range */
> + if (BAD_DATA(check_add_overflow(map->offset, map->length, &end)))
> + return false;
> +
> + /* File range cannot start past maxbytes */
> + if (BAD_DATA(map->offset >= inode->i_sb->s_maxbytes))
> + return false;
> +
> + switch (map->type) {
> + case FUSE_IOMAP_TYPE_MAPPED:
> + case FUSE_IOMAP_TYPE_UNWRITTEN:
> + /* Mappings backed by space must have a device/addr */
> + if (BAD_DATA(map->dev == FUSE_IOMAP_DEV_NULL))
> + return false;
> + if (BAD_DATA(map->addr == FUSE_IOMAP_NULL_ADDR))
> + return false;
> + break;
> + case FUSE_IOMAP_TYPE_DELALLOC:
> + case FUSE_IOMAP_TYPE_HOLE:
> + case FUSE_IOMAP_TYPE_INLINE:
> + /* Mappings not backed by space cannot have a device addr. */
> + if (BAD_DATA(map->dev != FUSE_IOMAP_DEV_NULL))
> + return false;
> + if (BAD_DATA(map->addr != FUSE_IOMAP_NULL_ADDR))
> + return false;
> + break;
> + case FUSE_IOMAP_TYPE_PURE_OVERWRITE:
> + /* "Pure overwrite" only allowed for write mapping */
> + if (BAD_DATA(iodir != WRITE_MAPPING))
> + return false;
> + break;
> + default:
> + /* should have been caught already */
> + ASSERT(0);
> + return false;
> + }
> +
> + /* XXX: we don't support devices yet */
> + if (BAD_DATA(map->dev != FUSE_IOMAP_DEV_NULL))
> + return false;
> +
> + /* No overflows in the device range, if supplied */
> + if (map->addr != FUSE_IOMAP_NULL_ADDR &&
> + BAD_DATA(check_add_overflow(map->addr, map->length, &end)))
> + return false;
> +
> + return true;
> +}
> +
> +/* Convert a mapping from the server into something the kernel can use */
> +static inline void fuse_iomap_from_server(struct iomap *iomap,
> + const struct fuse_iomap_io *fmap)
> +{
> + iomap->addr = fmap->addr;
> + iomap->offset = fmap->offset;
> + iomap->length = fmap->length;
> + iomap->type = fuse_iomap_type_from_server(fmap->type);
> + iomap->flags = fuse_iomap_flags_from_server(fmap->flags);
> + iomap->bdev = NULL; /* XXX */
> +}
> +
> +/* Convert a mapping from the kernel into something the server can use */
> +static inline void fuse_iomap_to_server(struct fuse_iomap_io *fmap,
> + const struct iomap *iomap)
> +{
> + fmap->addr = iomap->addr;
> + fmap->offset = iomap->offset;
> + fmap->length = iomap->length;
> + fmap->type = fuse_iomap_type_to_server(iomap->type);
> + fmap->flags = fuse_iomap_flags_to_server(iomap->flags);
> + fmap->dev = FUSE_IOMAP_DEV_NULL; /* XXX */
> +}
> +
> +/* Check the incoming _begin mappings to make sure they're not nonsense. */
> +static inline int
> +fuse_iomap_begin_validate(const struct inode *inode,
> + unsigned opflags, loff_t pos,
> + const struct fuse_iomap_begin_out *outarg)
> +{
> + /* Make sure the mappings aren't garbage */
> + if (!fuse_iomap_check_mapping(inode, &outarg->read, READ_MAPPING))
> + return -EFSCORRUPTED;
> +
> + if (!fuse_iomap_check_mapping(inode, &outarg->write, WRITE_MAPPING))
> + return -EFSCORRUPTED;
> +
> + /*
> + * Must have returned a mapping for at least the first byte in the
> + * range. The main mapping check already validated that the length
> + * is nonzero and there is no overflow in computing end.
> + */
> + if (BAD_DATA(outarg->read.offset > pos))
> + return -EFSCORRUPTED;
> + if (BAD_DATA(outarg->write.offset > pos))
> + return -EFSCORRUPTED;
> +
> + if (BAD_DATA(outarg->read.offset + outarg->read.length <= pos))
> + return -EFSCORRUPTED;
> + if (BAD_DATA(outarg->write.offset + outarg->write.length <= pos))
> + return -EFSCORRUPTED;
> +
> + return 0;
> +}
> +
> +static inline bool fuse_is_iomap_file_write(unsigned int opflags)
> +{
> + return opflags & (IOMAP_WRITE | IOMAP_ZERO | IOMAP_UNSHARE);
> +}
> +
> +static int fuse_iomap_begin(struct inode *inode, loff_t pos, loff_t count,
> + unsigned opflags, struct iomap *iomap,
> + struct iomap *srcmap)
> +{
> + struct fuse_inode *fi = get_fuse_inode(inode);
> + struct fuse_iomap_begin_in inarg = {
> + .attr_ino = fi->orig_ino,
> + .opflags = fuse_iomap_op_to_server(opflags),
> + .pos = pos,
> + .count = count,
> + };
> + struct fuse_iomap_begin_out outarg = { };
> + struct fuse_mount *fm = get_fuse_mount(inode);
> + FUSE_ARGS(args);
> + int err;
> +
> + args.opcode = FUSE_IOMAP_BEGIN;
> + args.nodeid = get_node_id(inode);
> + args.in_numargs = 1;
> + args.in_args[0].size = sizeof(inarg);
> + args.in_args[0].value = &inarg;
> + args.out_numargs = 1;
> + args.out_args[0].size = sizeof(outarg);
> + args.out_args[0].value = &outarg;
> + err = fuse_simple_request(fm, &args);
> + if (err)
> + return err;
> +
> + err = fuse_iomap_begin_validate(inode, opflags, pos, &outarg);
> + if (err)
> + return err;
> +
> + if (fuse_is_iomap_file_write(opflags) &&
> + outarg.write.type != FUSE_IOMAP_TYPE_PURE_OVERWRITE) {
> + /*
> + * For an out of place write, we must supply the write mapping
> + * via @iomap, and the read mapping via @srcmap.
> + */
> + fuse_iomap_from_server(iomap, &outarg.write);
> + fuse_iomap_from_server(srcmap, &outarg.read);
> + } else {
> + /*
> + * For everything else (reads, reporting, and pure overwrites),
> + * we can return the sole mapping through @iomap and leave
> + * @srcmap unchanged from its default (HOLE).
> + */
> + fuse_iomap_from_server(iomap, &outarg.read);
> + }
> +
> + return 0;
> +}
> +
> +/* Decide if we send FUSE_IOMAP_END to the fuse server */
> +static bool fuse_should_send_iomap_end(const struct iomap *iomap,
> + unsigned int opflags, loff_t count,
> + ssize_t written)
> +{
> + /* fuse server demanded an iomap_end call. */
> + if (iomap->flags & FUSE_IOMAP_F_WANT_IOMAP_END)
Codex points out that this needs to check IOMAP_F_PRIVATE, not
FUSE_IOMAP_F_WANT_IOMAP_END.
--D
next prev parent reply other threads:[~2026-05-13 17:38 UTC|newest]
Thread overview: 226+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-29 14:12 [PATCHBLIZZARD v8] fuse/libfuse/e2fsprogs: faster file IO for containerized ext4 servers Darrick J. Wong
2026-04-29 14:16 ` [PATCHSET v8 1/8] fuse: general bug fixes Darrick J. Wong
2026-04-29 14:21 ` [PATCH 1/4] fuse: flush pending FUSE_RELEASE requests before sending FUSE_DESTROY Darrick J. Wong
2026-04-29 14:22 ` [PATCH 2/4] fuse: implement file attributes mask for statx Darrick J. Wong
2026-04-29 14:22 ` [PATCH 3/4] fuse: update file mode when updating acls Darrick J. Wong
2026-04-30 13:48 ` Joanne Koong
2026-04-30 20:57 ` Darrick J. Wong
2026-05-01 9:53 ` Joanne Koong
2026-05-01 16:15 ` Darrick J. Wong
2026-04-29 14:22 ` [PATCH 4/4] fuse: propagate default and file acls on creation Darrick J. Wong
2026-05-01 11:11 ` Joanne Koong
2026-05-01 16:57 ` Darrick J. Wong
2026-04-29 14:16 ` [PATCHSET v8 2/8] iomap: cleanups ahead of adding fuse support Darrick J. Wong
2026-04-29 14:22 ` [PATCH 1/2] iomap: allow directio callers to supply _COMP_WORK Darrick J. Wong
2026-04-29 14:23 ` [PATCH 2/2] iomap: allow NULL swap info bdev when activating swapfile Darrick J. Wong
2026-05-08 9:06 ` Christoph Hellwig
2026-05-08 23:41 ` Darrick J. Wong
2026-04-29 14:17 ` [PATCHSET v8 3/8] fuse: cleanups ahead of adding fuse support Darrick J. Wong
2026-04-29 14:23 ` [PATCH 1/2] fuse: move the passthrough-specific code back to passthrough.c Darrick J. Wong
2026-05-14 18:38 ` Darrick J. Wong
2026-05-14 19:48 ` Amir Goldstein
2026-05-14 22:21 ` Darrick J. Wong
2026-04-29 14:23 ` [PATCH 2/2] fuse_trace: " Darrick J. Wong
2026-05-14 18:41 ` Darrick J. Wong
2026-04-29 14:17 ` [PATCHSET v8 4/8] fuse: allow servers to use iomap for better file IO performance Darrick J. Wong
2026-04-29 14:23 ` [PATCH 01/33] fuse: implement the basic iomap mechanisms Darrick J. Wong
2026-05-13 17:38 ` Darrick J. Wong [this message]
2026-04-29 14:24 ` [PATCH 02/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:24 ` [PATCH 03/33] fuse: make debugging configurable at runtime Darrick J. Wong
2026-05-13 17:41 ` Darrick J. Wong
2026-05-13 17:46 ` Bernd Schubert
2026-05-13 18:35 ` Darrick J. Wong
2026-05-13 19:44 ` Bernd Schubert
2026-05-14 14:35 ` Darrick J. Wong
2026-04-29 14:24 ` [PATCH 04/33] fuse: adapt FUSE_DEV_IOC_BACKING_{OPEN,CLOSE} to add new iomap devices Darrick J. Wong
2026-05-13 18:04 ` Darrick J. Wong
2026-04-29 14:24 ` [PATCH 05/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:25 ` [PATCH 06/33] fuse: enable SYNCFS and ensure we flush everything before sending DESTROY Darrick J. Wong
2026-04-29 14:25 ` [PATCH 07/33] fuse: clean up per-file type inode initialization Darrick J. Wong
2026-04-29 14:25 ` [PATCH 08/33] fuse: create a per-inode flag for setting exclusive mode Darrick J. Wong
2026-05-13 18:09 ` Darrick J. Wong
2026-04-29 14:26 ` [PATCH 09/33] fuse: create a per-inode flag for toggling iomap Darrick J. Wong
2026-05-14 19:52 ` Darrick J. Wong
2026-04-29 14:26 ` [PATCH 10/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:26 ` [PATCH 11/33] fuse: isolate the other regular file IO paths from iomap Darrick J. Wong
2026-05-13 18:18 ` Darrick J. Wong
2026-04-29 14:26 ` [PATCH 12/33] fuse: implement basic iomap reporting such as FIEMAP and SEEK_{DATA,HOLE} Darrick J. Wong
2026-05-13 18:30 ` Darrick J. Wong
2026-04-29 14:27 ` [PATCH 13/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:27 ` [PATCH 14/33] fuse: implement direct IO with iomap Darrick J. Wong
2026-05-13 18:44 ` Darrick J. Wong
2026-04-29 14:27 ` [PATCH 15/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:27 ` [PATCH 16/33] fuse: implement buffered " Darrick J. Wong
2026-05-13 19:18 ` Darrick J. Wong
2026-04-29 14:28 ` [PATCH 17/33] fuse_trace: " Darrick J. Wong
2026-05-13 19:25 ` Darrick J. Wong
2026-04-29 14:28 ` [PATCH 18/33] fuse: use an unrestricted backing device with iomap pagecache io Darrick J. Wong
2026-05-13 21:24 ` Darrick J. Wong
2026-04-29 14:28 ` [PATCH 19/33] fuse: implement large folios for iomap pagecache files Darrick J. Wong
2026-04-29 14:28 ` [PATCH 20/33] fuse: advertise support for iomap Darrick J. Wong
2026-04-29 14:29 ` [PATCH 21/33] fuse: query filesystem geometry when using iomap Darrick J. Wong
2026-05-13 21:05 ` Darrick J. Wong
2026-04-29 14:29 ` [PATCH 22/33] fuse_trace: " Darrick J. Wong
2026-05-14 20:54 ` Darrick J. Wong
2026-04-29 14:29 ` [PATCH 23/33] fuse: implement fadvise for iomap files Darrick J. Wong
2026-04-29 14:29 ` [PATCH 24/33] fuse: invalidate ranges of block devices being used for iomap Darrick J. Wong
2026-05-13 22:13 ` Darrick J. Wong
2026-04-29 14:30 ` [PATCH 25/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:30 ` [PATCH 26/33] fuse: implement inline data file IO via iomap Darrick J. Wong
2026-05-13 20:03 ` Darrick J. Wong
2026-04-29 14:30 ` [PATCH 27/33] fuse_trace: " Darrick J. Wong
2026-05-13 20:09 ` Darrick J. Wong
2026-04-29 14:31 ` [PATCH 28/33] fuse: allow more statx fields Darrick J. Wong
2026-04-29 14:31 ` [PATCH 29/33] fuse: support atomic writes with iomap Darrick J. Wong
2026-04-29 14:31 ` [PATCH 30/33] fuse_trace: " Darrick J. Wong
2026-04-29 14:31 ` [PATCH 31/33] fuse: disable direct fs reclaim for any fuse server that uses iomap Darrick J. Wong
2026-05-13 21:27 ` Darrick J. Wong
2026-04-29 14:32 ` [PATCH 32/33] fuse: enable swapfile activation on iomap Darrick J. Wong
2026-05-14 14:42 ` Darrick J. Wong
2026-04-29 14:32 ` [PATCH 33/33] fuse: implement freeze and shutdowns for iomap filesystems Darrick J. Wong
2026-04-29 14:17 ` [PATCHSET v8 5/8] fuse: allow servers to specify root node id Darrick J. Wong
2026-04-29 14:32 ` [PATCH 1/3] fuse: make the root nodeid dynamic Darrick J. Wong
2026-05-14 21:38 ` Darrick J. Wong
2026-04-29 14:32 ` [PATCH 2/3] fuse_trace: " Darrick J. Wong
2026-04-29 14:33 ` [PATCH 3/3] fuse: allow setting of root nodeid Darrick J. Wong
2026-05-14 21:37 ` Darrick J. Wong
2026-04-29 14:17 ` [PATCHSET v8 6/8] fuse: handle timestamps and ACLs correctly when iomap is enabled Darrick J. Wong
2026-04-29 14:33 ` [PATCH 1/9] fuse: enable caching of timestamps Darrick J. Wong
2026-05-14 22:09 ` Darrick J. Wong
2026-04-29 14:33 ` [PATCH 2/9] fuse: force a ctime update after a fileattr_set call when in iomap mode Darrick J. Wong
2026-05-14 21:44 ` Darrick J. Wong
2026-04-29 14:33 ` [PATCH 3/9] fuse: allow local filesystems to set some VFS iflags Darrick J. Wong
2026-05-14 22:14 ` Darrick J. Wong
2026-04-29 14:34 ` [PATCH 4/9] fuse_trace: " Darrick J. Wong
2026-04-29 14:34 ` [PATCH 5/9] fuse: cache atime when in iomap mode Darrick J. Wong
2026-05-14 22:16 ` Darrick J. Wong
2026-04-29 14:34 ` [PATCH 6/9] fuse: let the kernel handle KILL_SUID/KILL_SGID for iomap filesystems Darrick J. Wong
2026-05-14 22:18 ` Darrick J. Wong
2026-04-29 14:34 ` [PATCH 7/9] fuse_trace: " Darrick J. Wong
2026-05-14 22:19 ` Darrick J. Wong
2026-04-29 14:35 ` [PATCH 8/9] fuse: update ctime when updating acls on an iomap inode Darrick J. Wong
2026-05-14 22:20 ` Darrick J. Wong
2026-04-29 14:35 ` [PATCH 9/9] fuse: always cache ACLs when using iomap Darrick J. Wong
2026-04-29 14:18 ` [PATCHSET v8 7/8] fuse: cache iomap mappings for even better file IO performance Darrick J. Wong
2026-04-29 14:35 ` [PATCH 01/12] fuse: cache iomaps Darrick J. Wong
2026-05-14 22:28 ` Darrick J. Wong
2026-04-29 14:35 ` [PATCH 02/12] fuse_trace: " Darrick J. Wong
2026-04-29 14:36 ` [PATCH 03/12] fuse: use the iomap cache for iomap_begin Darrick J. Wong
2026-04-29 14:36 ` [PATCH 04/12] fuse_trace: " Darrick J. Wong
2026-04-29 14:36 ` [PATCH 05/12] fuse: invalidate iomap cache after file updates Darrick J. Wong
2026-04-29 14:36 ` [PATCH 06/12] fuse_trace: " Darrick J. Wong
2026-04-29 14:37 ` [PATCH 07/12] fuse: enable iomap cache management Darrick J. Wong
2026-05-14 22:59 ` Darrick J. Wong
2026-04-29 14:37 ` [PATCH 08/12] fuse_trace: " Darrick J. Wong
2026-04-29 14:37 ` [PATCH 09/12] fuse: overlay iomap inode info in struct fuse_inode Darrick J. Wong
2026-04-29 14:38 ` [PATCH 10/12] fuse: constrain iomap mapping cache size Darrick J. Wong
2026-05-14 23:00 ` Darrick J. Wong
2026-04-29 14:38 ` [PATCH 11/12] fuse_trace: " Darrick J. Wong
2026-05-14 23:05 ` Darrick J. Wong
2026-04-29 14:38 ` [PATCH 12/12] fuse: enable iomap Darrick J. Wong
2026-04-29 14:18 ` [PATCHSET v8 8/8] fuse: run fuse-iomap servers as a contained service Darrick J. Wong
2026-04-29 14:38 ` [PATCH 1/2] fuse: allow privileged mount helpers to pre-approve iomap usage Darrick J. Wong
2026-05-13 21:33 ` Darrick J. Wong
2026-04-29 14:39 ` [PATCH 2/2] fuse: set iomap backing device block size Darrick J. Wong
2026-04-29 14:18 ` [PATCHSET v8 1/6] libfuse: allow servers to use iomap for better file IO performance Darrick J. Wong
2026-04-29 14:39 ` [PATCH 01/25] libfuse: bump kernel and library ABI versions Darrick J. Wong
2026-04-29 14:39 ` [PATCH 02/25] libfuse: wait in do_destroy until all open files are closed Darrick J. Wong
2026-04-29 14:39 ` [PATCH 03/25] libfuse: add kernel gates for FUSE_IOMAP Darrick J. Wong
2026-04-29 14:40 ` [PATCH 04/25] libfuse: add fuse commands for iomap_begin and end Darrick J. Wong
2026-04-29 14:40 ` [PATCH 05/25] libfuse: add upper level iomap commands Darrick J. Wong
2026-04-29 14:40 ` [PATCH 06/25] libfuse: add a lowlevel notification to add a new device to iomap Darrick J. Wong
2026-04-29 14:40 ` [PATCH 07/25] libfuse: add upper-level iomap add device function Darrick J. Wong
2026-04-29 14:41 ` [PATCH 08/25] libfuse: add iomap ioend low level handler Darrick J. Wong
2026-04-29 14:41 ` [PATCH 09/25] libfuse: add upper level iomap ioend commands Darrick J. Wong
2026-04-29 14:41 ` [PATCH 10/25] libfuse: add a reply function to send FUSE_ATTR_* to the kernel Darrick J. Wong
2026-04-29 14:41 ` [PATCH 11/25] libfuse: connect high level fuse library to fuse_reply_attr_iflags Darrick J. Wong
2026-04-29 14:42 ` [PATCH 12/25] libfuse: support enabling exclusive mode for files Darrick J. Wong
2026-04-29 14:42 ` [PATCH 13/25] libfuse: support direct I/O through iomap Darrick J. Wong
2026-04-29 14:42 ` [PATCH 14/25] libfuse: don't allow hardlinking of iomap files in the upper level fuse library Darrick J. Wong
2026-04-29 14:42 ` [PATCH 15/25] libfuse: allow discovery of the kernel's iomap capabilities Darrick J. Wong
2026-04-29 14:43 ` [PATCH 16/25] libfuse: add lower level iomap_config implementation Darrick J. Wong
2026-04-29 14:43 ` [PATCH 17/25] libfuse: add upper " Darrick J. Wong
2026-04-29 14:43 ` [PATCH 18/25] libfuse: add low level code to invalidate iomap block device ranges Darrick J. Wong
2026-04-29 14:44 ` [PATCH 19/25] libfuse: add upper-level API to invalidate parts of an iomap block device Darrick J. Wong
2026-04-29 14:44 ` [PATCH 20/25] libfuse: add atomic write support Darrick J. Wong
2026-04-29 14:44 ` [PATCH 21/25] libfuse: allow disabling of fs memory reclaim and write throttling Darrick J. Wong
2026-04-29 14:44 ` [PATCH 22/25] libfuse: create a helper to transform an open regular file into an open loopdev Darrick J. Wong
2026-04-29 14:45 ` [PATCH 23/25] libfuse: add swapfile support for iomap files Darrick J. Wong
2026-04-29 14:45 ` [PATCH 24/25] libfuse: add lower-level filesystem freeze, thaw, and shutdown requests Darrick J. Wong
2026-04-29 14:45 ` [PATCH 25/25] libfuse: add upper-level filesystem freeze, thaw, and shutdown events Darrick J. Wong
2026-04-29 14:19 ` [PATCHSET v8 2/6] libfuse: allow servers to specify root node id Darrick J. Wong
2026-04-29 14:45 ` [PATCH 1/1] libfuse: allow root_nodeid mount option Darrick J. Wong
2026-04-29 14:19 ` [PATCHSET v8 3/6] libfuse: implement syncfs Darrick J. Wong
2026-04-29 14:46 ` [PATCH 1/2] libfuse: add strictatime/lazytime mount options Darrick J. Wong
2026-04-29 14:46 ` [PATCH 2/2] libfuse: set sync, immutable, and append when loading files Darrick J. Wong
2026-04-29 14:19 ` [PATCHSET v8 4/6] libfuse: add some service helper commands for iomap Darrick J. Wong
2026-04-29 14:46 ` [PATCH 1/3] mount_service: delegate iomap privilege from mount.service to fuse services Darrick J. Wong
2026-04-29 14:46 ` [PATCH 2/3] libfuse: enable setting iomap block device block size Darrick J. Wong
2026-04-29 14:47 ` [PATCH 3/3] mount_service: create loop devices for regular files Darrick J. Wong
2026-04-29 14:19 ` [PATCHSET v8 5/6] fuse: add sample iomap fuse servers Darrick J. Wong
2026-04-29 14:47 ` [PATCH 1/7] example/iomap_ll: create a simple iomap server Darrick J. Wong
2026-04-29 14:47 ` [PATCH 2/7] example/iomap_ll: track block state Darrick J. Wong
2026-04-29 14:47 ` [PATCH 3/7] example/iomap_ll: implement atomic writes Darrick J. Wong
2026-04-29 14:48 ` [PATCH 4/7] example/iomap_inline_ll: create a simple server to test inlinedata Darrick J. Wong
2026-04-29 14:48 ` [PATCH 5/7] example/iomap_ow_ll: create a simple iomap out of place write server Darrick J. Wong
2026-04-29 14:48 ` [PATCH 6/7] example/iomap_ow_ll: implement atomic writes Darrick J. Wong
2026-04-29 14:48 ` [PATCH 7/7] example/iomap_service_ll: create a sample systemd service fuse server Darrick J. Wong
2026-04-29 14:20 ` [PATCHSET v8 6/6] libfuse: cache iomap mappings for even better file IO performance Darrick J. Wong
2026-04-29 14:49 ` [PATCH 1/9] libfuse: enable iomap cache management for lowlevel fuse Darrick J. Wong
2026-04-29 14:49 ` [PATCH 2/9] libfuse: add upper-level iomap cache management Darrick J. Wong
2026-04-29 14:49 ` [PATCH 3/9] libfuse: allow constraining of iomap mapping cache size Darrick J. Wong
2026-04-29 14:50 ` [PATCH 4/9] libfuse: add upper-level iomap mapping cache constraint code Darrick J. Wong
2026-04-29 14:50 ` [PATCH 5/9] libfuse: enable iomap Darrick J. Wong
2026-04-29 14:50 ` [PATCH 6/9] example/iomap_ll: cache mappings for later Darrick J. Wong
2026-04-29 14:50 ` [PATCH 7/9] example/iomap_inline_ll: cache iomappings in the kernel Darrick J. Wong
2026-04-29 14:51 ` [PATCH 8/9] example/iomap_ow_ll: " Darrick J. Wong
2026-04-29 14:51 ` [PATCH 9/9] example/iomap_service_ll: " Darrick J. Wong
2026-04-29 14:20 ` [PATCHSET v8 1/6] libext2fs: refactoring for fuse2fs iomap support Darrick J. Wong
2026-04-29 14:51 ` [PATCH 1/5] libext2fs: invalidate cached blocks when freeing them Darrick J. Wong
2026-04-29 14:51 ` [PATCH 2/5] libext2fs: only flush affected blocks in unix_write_byte Darrick J. Wong
2026-04-29 14:52 ` [PATCH 3/5] libext2fs: allow unix_write_byte when the write would be aligned Darrick J. Wong
2026-04-29 14:52 ` [PATCH 4/5] libext2fs: allow clients to ask to write full superblocks Darrick J. Wong
2026-04-29 14:52 ` [PATCH 5/5] libext2fs: allow callers to disallow I/O to file data blocks Darrick J. Wong
2026-04-29 14:20 ` [PATCHSET v8 2/6] fuse2fs: use fuse iomap data paths for better file I/O performance Darrick J. Wong
2026-04-29 14:52 ` [PATCH 01/19] fuse2fs: implement bare minimum iomap for file mapping reporting Darrick J. Wong
2026-04-29 14:53 ` [PATCH 02/19] fuse2fs: add iomap= mount option Darrick J. Wong
2026-04-29 14:53 ` [PATCH 03/19] fuse2fs: implement iomap configuration Darrick J. Wong
2026-04-29 14:53 ` [PATCH 04/19] fuse2fs: register block devices for use with iomap Darrick J. Wong
2026-04-29 14:53 ` [PATCH 05/19] fuse2fs: implement directio file reads Darrick J. Wong
2026-04-29 14:54 ` [PATCH 06/19] fuse2fs: add extent dump function for debugging Darrick J. Wong
2026-04-29 14:54 ` [PATCH 07/19] fuse2fs: implement direct write support Darrick J. Wong
2026-04-29 14:54 ` [PATCH 08/19] fuse2fs: turn on iomap for pagecache IO Darrick J. Wong
2026-04-29 14:54 ` [PATCH 09/19] fuse2fs: don't zero bytes in punch hole Darrick J. Wong
2026-04-29 14:55 ` [PATCH 10/19] fuse2fs: don't do file data block IO when iomap is enabled Darrick J. Wong
2026-04-29 14:55 ` [PATCH 11/19] fuse2fs: try to create loop device when ext4 device is a regular file Darrick J. Wong
2026-04-29 14:55 ` [PATCH 12/19] fuse2fs: enable file IO to inline data files Darrick J. Wong
2026-04-29 14:56 ` [PATCH 13/19] fuse2fs: set iomap-related inode flags Darrick J. Wong
2026-04-29 14:56 ` [PATCH 14/19] fuse2fs: configure block device block size Darrick J. Wong
2026-04-29 14:56 ` [PATCH 15/19] fuse4fs: separate invalidation Darrick J. Wong
2026-04-29 14:56 ` [PATCH 16/19] fuse2fs: implement statx Darrick J. Wong
2026-04-29 14:57 ` [PATCH 17/19] fuse2fs: enable atomic writes Darrick J. Wong
2026-04-29 14:57 ` [PATCH 18/19] fuse4fs: disable fs reclaim and write throttling Darrick J. Wong
2026-04-29 14:57 ` [PATCH 19/19] fuse2fs: implement freeze and shutdown requests Darrick J. Wong
2026-04-29 14:20 ` [PATCHSET v8 3/6] fuse4fs: adapt iomap for fuse services Darrick J. Wong
2026-04-29 14:57 ` [PATCH 1/3] fuse4fs: configure iomap when running as a service Darrick J. Wong
2026-04-29 14:58 ` [PATCH 2/3] fuse4fs: set iomap backing device blocksize Darrick J. Wong
2026-04-29 14:58 ` [PATCH 3/3] fuse4fs: ask for loop devices when opening via fuservicemount Darrick J. Wong
2026-04-29 14:21 ` [PATCHSET v8 4/6] fuse4fs: specify the root node id Darrick J. Wong
2026-04-29 14:58 ` [PATCH 1/1] fuse4fs: don't use inode number translation when possible Darrick J. Wong
2026-04-29 14:21 ` [PATCHSET v8 5/6] fuse2fs: handle timestamps and ACLs correctly when iomap is enabled Darrick J. Wong
2026-04-29 14:58 ` [PATCH 01/10] fuse2fs: add strictatime/lazytime mount options Darrick J. Wong
2026-04-29 14:59 ` [PATCH 02/10] fuse2fs: skip permission checking on utimens when iomap is enabled Darrick J. Wong
2026-04-29 14:59 ` [PATCH 03/10] fuse2fs: let the kernel tell us about acl/mode updates Darrick J. Wong
2026-04-29 14:59 ` [PATCH 04/10] fuse2fs: better debugging for file mode updates Darrick J. Wong
2026-04-29 14:59 ` [PATCH 05/10] fuse2fs: debug timestamp updates Darrick J. Wong
2026-04-29 15:00 ` [PATCH 06/10] fuse2fs: use coarse timestamps for iomap mode Darrick J. Wong
2026-04-29 15:00 ` [PATCH 07/10] fuse2fs: add tracing for retrieving timestamps Darrick J. Wong
2026-04-29 15:00 ` [PATCH 08/10] fuse2fs: enable syncfs Darrick J. Wong
2026-04-29 15:00 ` [PATCH 09/10] fuse2fs: set sync, immutable, and append at file load time Darrick J. Wong
2026-04-29 15:01 ` [PATCH 10/10] fuse4fs: increase attribute timeout in iomap mode Darrick J. Wong
2026-04-29 14:21 ` [PATCHSET v8 6/6] fuse2fs: cache iomap mappings for even better file IO performance Darrick J. Wong
2026-04-29 15:01 ` [PATCH 1/4] fuse2fs: enable caching of iomaps Darrick J. Wong
2026-04-29 15:01 ` [PATCH 2/4] fuse2fs: constrain iomap mapping cache size Darrick J. Wong
2026-04-29 15:02 ` [PATCH 3/4] fuse4fs: upsert first file mapping to kernel on open Darrick J. Wong
2026-04-29 15:02 ` [PATCH 4/4] fuse2fs: enable iomap Darrick J. Wong
-- strict thread matches above, loose matches on Subject: below --
2026-02-23 23:01 [PATCHSET v7 4/9] fuse: allow servers to use iomap for better file IO performance Darrick J. Wong
2026-02-23 23:08 ` [PATCH 01/33] fuse: implement the basic iomap mechanisms Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260513173823.GF9544@frogsfrogsfrogs \
--to=djwong@kernel.org \
--cc=bernd@bsbernd.com \
--cc=fuse-devel@lists.linux.dev \
--cc=joannelkoong@gmail.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=miklos@szeredi.hu \
--cc=neal@gompa.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.