[PATCH v3 3/3] arm64: defconfig: Enable drivers for BeagleBadge

[Judith Mendez <jm@ti.com>]

Enable drivers used on BeagleBadge[1]:
- LED PWM Multicolor driver as a module
- MCP SPI IO Expander driver as a module
- Seven Segment display GPIO driver as module
- Temperature Sensor driver as a module

[1] https://github.com/beagleboard/BeagleBadge
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changelog:
- Move config options as per make savedefconfig
---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d905a0777f939..5cfb7f6f2ae78 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -634,6 +634,7 @@ CONFIG_PINCTRL_BRCMSTB=y
 CONFIG_PINCTRL_BCM2712=y
 CONFIG_PINCTRL_DA9062=m
 CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_MCP23S08=m
 CONFIG_PINCTRL_RK805=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_SX150X=m
@@ -766,6 +767,7 @@ CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
+CONFIG_SENSORS_SHT4x=m
 CONFIG_SENSORS_AMC6821=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
@@ -955,6 +957,8 @@ CONFIG_VIDEO_IMX412=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
 CONFIG_VIDEO_S5KJN1=m
+CONFIG_AUXDISPLAY=y
+CONFIG_SEG_LED_GPIO=m
 CONFIG_DRM=m
 CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_HDLCD=m
@@ -1332,6 +1336,7 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_QCOM_FLASH=m
+CONFIG_LEDS_PWM_MULTICOLOR=m
 CONFIG_LEDS_QCOM_LPG=m
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
-- 
2.54.0