All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Benson Leung <bleung@chromium.org>,
	Jameson Thies <jthies@google.com>,
	Nathan Rebello <nathan.c.rebello@gmail.com>,
	Johan Hovold <johan@kernel.org>,
	Pooja Katiyar <pooja.katiyar@intel.com>,
	Hsin-Te Yuan <yuanhsinte@chromium.org>,
	Abel Vesa <abelvesa@kernel.org>, stable <stable@kernel.org>
Subject: [PATCH 8/8] usb: typec: ucsi: validate connector number in ucsi_connector_change()
Date: Wed, 13 May 2026 17:52:55 +0200	[thread overview]
Message-ID: <2026051351-truck-steadfast-df48@gregkh> (raw)
In-Reply-To: <2026051347-clustered-deflected-9543@gregkh>

The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM.  ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.

Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array.

Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Jameson Thies <jthies@google.com>
Cc: Nathan Rebello <nathan.c.rebello@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 5b7ad9e99cb9..539dc706798d 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1380,13 +1380,22 @@ static void ucsi_handle_connector_change(struct work_struct *work)
  */
 void ucsi_connector_change(struct ucsi *ucsi, u8 num)
 {
-	struct ucsi_connector *con = &ucsi->connector[num - 1];
+	struct ucsi_connector *con;
 
 	if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) {
 		dev_dbg(ucsi->dev, "Early connector change event\n");
 		return;
 	}
 
+	if (!num || num > ucsi->cap.num_connectors) {
+		dev_warn_ratelimited(ucsi->dev,
+				     "Bogus connector change on %u (max %u)\n",
+				     num, ucsi->cap.num_connectors);
+		return;
+	}
+
+	con = &ucsi->connector[num - 1];
+
 	if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
 		schedule_work(&con->work);
 }
-- 
2.54.0


  parent reply	other threads:[~2026-05-13 15:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-13 15:52 [PATCH 1/8] usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 2/8] usb: typec: altmodes/displayport: validate count before reading Status Update VDO Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 3/8] usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 4/8] usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Greg Kroah-Hartman
2026-05-15  5:13   ` Badhri Jagan Sridharan
2026-05-13 15:52 ` [PATCH 5/8] usb: typec: tcpm: validate VDO count before reading Attention status VDO Greg Kroah-Hartman
2026-05-14 21:55   ` Badhri Jagan Sridharan
2026-05-15  5:05     ` Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 6/8] usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 7/8] usb: typec: ucsi: displayport: NAK DP_CMD_CONFIGURE without a payload VDO Greg Kroah-Hartman
2026-05-13 15:52 ` Greg Kroah-Hartman [this message]
2026-05-13 16:03   ` [PATCH 8/8] usb: typec: ucsi: validate connector number in ucsi_connector_change() Benson Leung
2026-05-13 16:13   ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026051351-truck-steadfast-df48@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=abelvesa@kernel.org \
    --cc=bleung@chromium.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=johan@kernel.org \
    --cc=jthies@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nathan.c.rebello@gmail.com \
    --cc=pooja.katiyar@intel.com \
    --cc=stable@kernel.org \
    --cc=yuanhsinte@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.